The Store

The Repair 1 Auto/Boat/Plane Section

Pro Lite Electronix 24 LED Rechargeable Task Light

(ALRLER24C) Pro Lite Electronix 24 LED Rechargeable Task LightFeatures: 24 LED Rechargeable Task Light Recharging Cradle with Charge Status Indicator Light Dual Brightness Levels with Soft Touch Switch 10 Hour Output @ Standard & 5 Hour Light Output @ Bright Level Low Battery Warning Indicator Light Recessed Folding Hanging Hook Lanyard and Carrying Pouch with belt loop Comfort grips and wrist strap

$33.76
Click To Buy

Winch Puller 1-Ton, 12'' Lift

(AME144) Winch Puller 1-Ton, 12'' LiftFeatures: Perfect for jobs that require more than 6 feet of lift; because it has a maximum pull of 12 feet. 1-Ton load capacity with 18:1 leverage and 2:1 safety factor (4:1 safety factor at 1/2-Ton) 12'' lift capacity Premium 3/16"" Galvanized Aircraft Cable Solid gearing and heavy-duty frame and handle assembly make this ''come a long'' the choice for both professionals and DIYers. Made in the U.S.A.

$48.38
Click To Buy

1/2-Ton Chain Block Hoist - 10 Foot Lift

(AME405) 1/2-Ton Chain Block Hoist - 10 Foot LiftFeatures: This 1/2-ton capacity model is the smallest chain block offered by American Power Pull. With the power to lift +1000lbs., the 405 is perfect for most automotive lifting. Specifically heat treated to assure years of service. Thick steel construction prevents damage from impact and rough handling. Rated Capacity: 1/2-Ton Test Load: 3/4-Ton Standard Lift: 10 foot Chain diameter: 1/4"" Pulling effort at load: 52 lbs. Net weight: 24.3 lbs.

$109.38
Click To Buy

1-Ton Chain Block Hoist - 10 Foot Lift

(AME410) 1-Ton Chain Block Hoist - 10 Foot LiftFeatures: With the power to lift +2000lbs., the American Power Pull 410 can handle all your automotive, industrial, and farm hoisting needs. Specifically heat treated to assure years of service. Thick steel construction prevents damage from impact and rough handling. Rated Capacity: 1-Ton Test Load: 1-1/2-Ton Standard Lift: 10 foot Chain diameter: 1/4"" Pulling effort at load: 69 lbs. Net weight: 28.7 lbs.

$128.24
Click To Buy

3/4 Ton Chain Puller - 5 Foot Lift

(AME605) 3/4 Ton Chain Puller - 5 Foot LiftFeatures: American Power Pull Chain Pullers pull, lift, and drag with ease and speed. Specifications: Rated Capacity: 3/4-ton Tested Load: 1-1/8-ton Standard Lift: 5 feet Chain diameter: 1/4"" Handle length: 11-3/16"" Net weight: 17.7 lbs.

$126.24
Click To Buy

1-1/2 Ton Chain Puller - 5 Foot Lift

(AME615) 1-1/2 Ton Chain Puller - 5 Foot LiftFeatures: American Power Pull Chain Pullers pull, lift, and drag with ease and speed. Specifications: Rated Capacity: 1-1/2-ton Tested Load: 2-1/4-ton Standard Lift: 5 feet Chain diameter: 5/16"" Handle length: 16-3/8"" Net weight: 26.5 lbs.

$157.97
Click To Buy

Winch Puller 2-Ton, 6'' Lift

(AME72A) Winch Puller 2-Ton, 6'' LiftFeatures: The uses are endless for this versatile American Power Pull model. Whatever the project, stretching, pulling, lifting, lowering. 2-Ton load capacity with 36:1 leverage and 2:1 safety factor (4:1 safety factor at 1-Ton) 6'' lift capacity Premium 3/16"" Galvanized Aircraft Cable Incorporates a pulley block for greater pulling power One piece pulley block wheels for longer cable life Solid gearing and heavy-duty frame and handle assembly make this ''come a long'' the choice for both professionals and DIYers. Padded comfortable padded grip Made in the U.S.A.

$48.21
Click To Buy

Brake Drum Micrometer

(AMM8500) Brake Drum MicrometerFeatures: Range: 6"" To 16.125"" Graduations: 0.005""

$276.15
Click To Buy

Adaptek Adapter Kit for Hubless Cars & Light Trucks

(AMM9310) Adaptek Adapter Kit for Hubless Cars & Light TrucksFeatures: Adaptek adapters increase performance levels on most 1"" arbor lathes and deliver a superior microfinish on drums and rotors, composite asn standard cast applications and most flywheels. Single setup, self-centering, with extra mass for maximum vibration damping, Adaptek adapters provide better results with less chatter. Includes AMM 9311 & AMM 9312

$592.07
Click To Buy

1000A Data-Logging Clamp-on Multimeter TRMS

(AMPACD6TRMS) 1000A Data-Logging Clamp-on Multimeter TRMSFeatures: TRMS & Backlight Screen Measurements: AC/DC Voltage up to 600V, AC Current up to 1000A, resistance, frequency and temperature Data-logging 5400 points Optional PC interface capability Audible continuity Auto power off Automatic polarity Low battery indication Data hold Large, easy to read LCD display Accommodates conductors up to 1.77"" (45mm) in diameter Carrying case, thermocouple, test leads, batteries (installed) and user manual included Voltage overload protection for all functions up to 600V AC/DC Specifications TRMS: Yes AC Current: 40.0/400.0/1000 A AC Current Basic Accuracy: +/-(1.0% Rdg + 5 LSD) @ 50 and 60Hz DC Voltage: 600.0V DC Voltage Basic Accuracy: +/-(0.5% Rdg + 5 LSD) AC Voltage: 600.0V AC Voltage Basic Accuracy: +/-(1.0% Rdg + 5 LSD) @ 50 / 60 Hz Resistance: 999.9 Ohms Resistance Basic Accuracy: +/-(1.0% Rdg + 6 LSD) Frequency: 5.00Hz to 500.0Hz Frequency Basic Accuracy: +/-(0.5% Rdg +4 LSD) Temperature: 58 F to 572 F (-50 C to 300 C) Temperature Basic Accuracy: +/-(2.0% Rdg + 6F) +/-(2.0 % Rdg + 3C)

$97.49
Click To Buy

Amprobe Digital AC/DC Clamp-on Multimeter

(AMPACDC400) Amprobe Digital AC/DC Clamp-on MultimeterFeatures: AC/DC Current up to 400A AC/DC Voltage up to 600V Resistance measurement Continuity test Data Hold MAX/MIN recording Relative measurement Backlight Analog bargraph Auto or Manual range selection Low battery indicator Accommodates conductors up to 1.18"" (30mm) in diameter Specifications DC Voltage: 400mV/4.000/40.00/400.0/600V�??(1.0%Rdg+2LSD) AC Voltage: 400mV �??(1.0%Rdg + 50 LSD)4.000/40.00/400.0/600V �??(1.2% Rdg + 3 LSD) AC/DC Current: 40.00/400.0A �??(2% Rdg + 10 LSD) @50 - 60hz Resistance: 400.0, 4.000/40.00/400.0k �??(1% Rdg + 5 LSD) 4.000/40.00M �??(3% Rdg + 3 LSD)

$176.34
Click To Buy

Amprobe Professional Series Digital Multimeter TRMS AM-110 TRMS

(AMPAM110TRMS) Amprobe Professional Series Digital Multimeter TRMS AM-110 TRMSFeatures: TRMS BEEP-JACK audible warning against improper connection Peak hold (30ms response time) Auto and manual ranging Relative zero mode Auto power off Data hold Backlight display Large, easy to read LCD display Diode test Audible continuity Specifications TRMS: Yes AC Voltage: 400.0mV, 4.000/40.00/400.0/1000V �??(1.5% Rdg + 5 LSD) @ 4V - 400V ranges ** DC Voltage: 400.0mV, 4.000/40.00/400.0/1000V �??(0.5% Rdg + 3 LSD) @ 4V - 400V ranges ** Resistance: 400.0, 4.000/40.00/400.0k, 4.000/40.00M �??(0.8%Rdg+6LSD)@400-400k range** AC/DC Current: 400.0/4000?A, 40.00/400.0mA, 4.000/10.00A �??(2.0% Rdg + 6 LSD) Frequency: 5.000/50.00/500.0Hz, 5.000/50.00kHz, 500.0/1.000MHz �??(0.5% Rdg + 4 LSD) Capacitance: 50 0.0nF, 5.000/50.00/500.0/3000?F �??(3.5% Rdg + 6 LSD) Temperature: -4�??F to 572�??F (-20�??C to 300�??C) �??(2.0% Rdg + 6�??F) �??(2.0% Rdg + 3�??C) Back light display: Yes

$108.19
Click To Buy

Digital Multimeter

(AMPAM220) Digital MultimeterFeatures: Measure: AC/DC Voltage up to 600V, AC/DC Current up to 10A, Resistance, Capacitance, Frequency, Duty Cycle AC/DC micro Amps for sensors diagnosis Large Backlight LCD Display Diode Test Audible Continuity Test Data Hold MAX, MIN and Relative measurements Auto and Manual Ranging Auto Power Off (can be disabled) Tilt stand Specifications AC/DC Voltage: 400mV 4.000/40.00/400.0/600 V AC/DC Current: 400/4000�?�A 40/400 mA 4/10 A Resistance: 400.0 Ohms 4.000/40.00/400.0 kOhms 4.000MOhms/40.00 MOhms Capacitance: 40.00/400.0 nF 4.000/40.00/400.0/4000�?�F Frequency: 10.00/ 100.0/1000 Hz 10.00/100.0/1000 kHz 10M Hz Duty Cycle: 0.1%_99.9%

$41.46
Click To Buy

Advanced Wire Tracer

(AMPAT1000) Advanced Wire TracerFeatures: Trace energized lines up to 300VAC or VDC Trace unenergized and open conductors Identifies breakers and fuses without powering down Locates shorts Identifies wires in a bundle Identifies control, alarm and telephone system wiring Traces coaxial cable shield Receiver range 1 to 3 feet from a cable being traced

$363.12
Click To Buy

Break�?r Trac�?r (Breaker Tracer Tool)

(AMPBT250) Break�?r Trac�?r (Breaker Tracer Tool)Features: Identifies circuit breaker location Works on all electrical systems from 90 to 250 VAC Perfect for office, residential and HVAC applications Automatic sensitivity adjustment Quick and easy to use Extremely accurate reading always finds the right breaker Durable and dependable

$98.35
Click To Buy

30A AC/DC Clamp-On Transducer

(AMPCT30) 30A AC/DC Clamp-On TransducerFeatures: For use with multimeters, oscilloscopes, power recorders or any instrument with AC and DC milli-volt input Current measurement from 1mA up to 30A Perfect for measuring leakage current, secondary output of Current transformers, automotive or battery circuits, etc. Multiple current ranges of 400mA (AC only), 4 and 30Amps AC/DC for accurate measurement Millivolt output of 1mVAC per milliamp, 100mV and 10mV per Amp respectively to current ranges Wide range of frequency response 40-100Hz Small jaw for tight spaces Maximum jaw opening 7/8"" Specifications DC Current: �??(2.0% Rdg + 0.5mA) @ 400mA to 4A range �??(2.0% Rdg + 30mA) @ 30A range AC Current: �??(2.0% Rdg+0.50mA)@400mA range & 50/60Hz** �??(2.5% Rdg+3mA)@400mA - 4A range & 50/60Hz** �??(2.0% Rdg + 30mA)@30A range & 50/60Hz**

$182.51
Click To Buy

4 Ton Capacity Portable Body and Frame Straightening Kit

(AP107D) 4 Ton Capacity Portable Body and Frame Straightening KitFeatures: Kit Includes: Blow Molded Case, Male Connector, Spreader Ram Toe, 21"" Extension Tube, Female Adapter, Spreader Plunge Toe, 18"" Extension Tube, Hose, Wedge Head, 10"" Extension Tube, Spreader Ram, 90-degree V-Base, 6-1/2"" Extension Tube, 2-3/4"" Flexible Head, 4 Ton Hydraulic Unit, Serrated Saddle, Rubber-Faced Flat Base, Ram

$187.11
Click To Buy

2 Ton Tripod Under Hoist Stand

(AP1102) 2 Ton Tripod Under Hoist StandFeatures: Ideal for supporting vehicle components under the vehicle All steel construction for added strength Wide base design for load stability Specifications: Max. height: 85-7/8"" (2181 mm) Min. height: 56-1/8"" (1426 mm) Base diameter: 24"" (609 mm) Weight: 40 lbs. (18.14 kg)

$112.19
Click To Buy

3/8" Palm Ratchet Wrench

(AP1113) 3/8" Palm Ratchet WrenchFeatures: Compact size, great for working in tight areas. Lever type throttle control. Lightweight and compact. Specifications: Free Speed (rpm): 160 Air Consumption (1/min): 110(4 CFM) Max Torque: 50ft/lbs Square Drive (inch): 3/8"" Air Inlet (inch): 1/4"" Std. Bolt Size (inch): 3/8"" Length (inch): 8-3/8"" Air Pressure (kg/cm ): 6.2 (90PSI)

$40.38
Click To Buy

1/4" Air Stubby Ratchet Wrench

(AP1114) 1/4" Air Stubby Ratchet WrenchFeatures: Compact and lightweight size Ideal tool for confined working areas, such as under dashboard work and small engine repair Built-in regulator Specifications: Free speed: 240 RPM Max torque: 30 ft-lbs. Air inlet: 1/4"" NPT

$45.95
Click To Buy

3/8" Super Duty Air Ratchet Wrench

(AP1115) 3/8" Super Duty Air Ratchet WrenchFeatures: High performance motor delivers higher torque than standard ratchets 360 degree adjustable exhaust directs air away from work surface Short, robust crankshaft yeild power with low vibration Planetary gears with nitrided ring gear Self-lubricating rotor blades Reinforced throttle lever Ergonomic handle Specifications: Free speed: 200 RPM Max torque: 60 ft.-lbs. Air inlet: 1/4"" NPT

$61.28
Click To Buy

3/4 Ton Under Hoist Stand

(AP1175) 3/4 Ton Under Hoist StandFeatures: Lightweight, slender design makes handling easy even in close quarters Quickly adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load Specifications: Max. height: 81-1/2"" (2070 mm) Min. height: 54-1/4"" (1403 mm) Base diameter: 12"" (305 mm) Weight: 28 lbs. (12.7 kg)

$107.57
Click To Buy

Surface Prep Kit with Composite Handle 90 Degree Angle Die Grinder

(AP1220) Surface Prep Kit with Composite Handle 90 Degree Angle Die GrinderFeatures: Ideal for cleaning and polishing engine heads and detail sanding Patent #5,332,098 Weight 3 lbs. Kit Includes: 1 - 1/4"" 90 degree Angle die grinder with composite handle(AP1240), 5 - 2"" Surface prep pads with 1 holder, 5 - 3"" Surface prep pads with 1 holder, 1 - spanner wrench, 1 - 1/8"" collet, 10 pc. Stone assortment Specifications: Collet Size: 1/4"" Free Speed: 20,000 Overall Length: 5-1/4"" (133mm) Net Weight 7/8"" (.42mm) Motor HP: 1/3 Air Inlet Thread NPT: 1/4"" Average Air Consumption: 3 cfm Working air pressure: 90-120 PSI

$65.47
Click To Buy

Pinstripe Removal Tool with 12 Eraser pads

(AP1232) Pinstripe Removal Tool with 12 Eraser padsFeatures: Specialty tool developed for the removal of pinstripes, adhesive, double faces tape with Astro''s Smart Eraser Pad Geared at 4000 RPM Lightweight Composite body - reduces user fatigue 12 Smart Eraser Pads included Specifications: Disc capacity: 3-1/2"" Free speed: 4,000 RPM Overall length: 7-3/4"" Net weight: 1-1/4 lb. (0.56 kg) Air inlet thread NPT: 1/4"" Average air consumption: 4 CFM Working air pressure: 90-120 PSI

$122.87
Click To Buy

1/4" 90 Degree Composite Body Die Grinder

(AP1240) 1/4" 90 Degree Composite Body Die GrinderFeatures: Composite handle reduces vibration Rib textured handle provides a firm grip Lever throttle for feathering control Compact lightweight Built-in regulator Front exhaust Specifications: Collet Size: 1/4"" Free Speed: 20,000 Overall Length: 5-1/4"" (133mm) Net Weight 7/8"" (.42mm) Motor HP: 1/3 Air Inlet Thread NPT: 1/4"" Average Air Consumption: 3 cfm Working air pressure: 90-120 PSI

$53.86
Click To Buy

1/4" 30 Degree Angle Die Grinder

(AP1261) 1/4" 30 Degree Angle Die GrinderFeatures: Gearless Ergonomic design fits comforatbly in the palm of your hand allowing for extended use with little strain on the hand and wrist Composite handle reduces vibration Lever throttle for feathering control Comes with brass regulator Front exhaust Specifications: Collet size: 1/4"" Free speed: 25,000 RPM Overall length 7-3/4"" (197 mm) Net weight: 1 lb. (.46 kg) Motor HP: 1/3 Air inlet thread: 1/4"" NPT Working air pressure: 90-120 PSI

$48.70
Click To Buy