The Store

The Repair 10 Auto/Boat/Plane Section

Heavy Duty Angle Die Grinder

(CP863) Heavy Duty Angle Die GrinderFeatures: 120 Angle head for flexibility in tight quarters. Lock off throttle to prevent accidental start up. Insulated grip for greater operator comfort. Adjustable speed regulator for precise control. Applications: high speed blending, smoothing, porting and deburring in confined areas. Free speed: 22000 rpm. Specifications: Collet Size: 1/4"" (6mm) Weight 1-1/8"" (0.5mm) Length:7-3/8"" (187mm) Avg. Air Consumption: 5 CFM Air Inlet NPTF in.: �?� Min. Hose Size: 3/8"" (10mm) Sound dBA Pressuer: 91.7 (102 Power) Vibration:

$128.15
Click To Buy

6" Heavy Duty Dual Action Air Sander

(CP864) 6" Heavy Duty Dual Action Air SanderFeatures: Rotary and orbital motion for rapid removal as well as fine finishing Sure-grip insulated handle Crossbolt-style hub mounting minimizes vibration Circular exhaust diffuses air flow Applications: blending and smoothing filler, feather edging and pre-paint preparation Free speed: 10000 rpm Specifications: Paper size in.: 6 Weight lb.: 4 Average Air Consumption CFM: 5 Air Inlet NPTF in.: 1/4 Free Speed rpm: 10000 Motor hp: 1/2

$131.14
Click To Buy

6" General Duty Dual Action Air Sander

(CP870) 6" General Duty Dual Action Air SanderFeatures: Rotary and orbital motion for rapid removal as well as fine finishing Speed regulator to match speed to the job Lock off throttle to prevent accidental start ups Insulated grip provides comfort to operator Applications: blending and smoothing filler, feather edging and pre-paint preparation Free speed: 10000 rpm Specifications: Paper size in.: 6 Weight lb.: 4-1/4 Average Air Consumption CFM: 5 Air Inlet NPTF in.: 1/4 Free Speed rpm: 10000 Motor hp: 1/2

$54.81
Click To Buy

Air Die Grinder

(CP872) Air Die GrinderFeatures: Lock off throttle to prevent accidental start up Rear exhaust directs air away from the workpiece Built in regulator matches speed to the job Complete with 1/4"" and 6mm collet Applications: tire scuffing, cleaning tire moldings, general high speed polishing and grinding Free Speed: 22000 rpm Specifications: Collet Size in.: 1/4 Weight lb.: 1-1/4 Length in.: 5-3/4 Average Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 22000

$55.52
Click To Buy

3" Air Cut-Off Tool

(CP874) 3" Air Cut-Off ToolFeatures: Lock off throttle to prevent accidental start up Rear exhaust directs air away from workpiece Built-in regulator matches speed to job Applications: cutting through sheet metal, fiberglass, bolts, muffler clamps and hangers; also grinds down burrs and rough edges Free Speed: 22000 rpm Specifications: Wheel Size in.: 2-7/8 Weight lb.: 1-3/4 Length in.: 7-1/4 Average Air Consumption CFM: 5 Air Inlet NPTF in.: 1/4 Free Speed rpm: 22000

$57.82
Click To Buy

Mini Angle Air Die Grinder

(CP875) Mini Angle Air Die GrinderFeatures: Compact, lightweight design for easy maneuverability Lock off throttle to prevent accidental start up 90 degree angle head allows flexibility in tight quarters Complete with 1/4"" and 6mm collet Applications: high speed blending, smoothing, porting and deburring in confined areas Free Speed: 21000 rpm Specifications: Collet/Spindle Size in.: 1/4 Weight lb.: 1 Length in.: 4-7/8 Average Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 21000

$56.27
Click To Buy

Mini Air Die Grinder

(CP876) Mini Air Die GrinderFeatures: Compact, lightweight design for easy maneuverability Lock off throttle to prevent accidental start up Complete with 1/4"" and 6mm collet Built in regulator to match speed to the job Applications: high speed blending, smoothing porting and deburring in confined areas Free Speed: 28000 rpm Specifications: Collet/Spindle Size in.: 1/4 Weight lb.: 3/4 Length in.: 4-3/4 Average Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 28000

$60.82
Click To Buy

3/8" Reversible Angle Air Drill

(CP879) 3/8" Reversible Angle Air DrillFeatures: Compact, low profile head for drilling in confined areas Convenient reverse valve for simple directional changes Rear exhaust directs air away from the workpiece Teasing throttle for control from start-up thru run down Applications: screwdriving, drilling in hard to reach areas Free Speed: 1800 rpm Specifications: Chuck Size in.: 3/8 Weight lb.: 2-1/4 Length in.: 8-1/4 Aveerage Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 1800

$99.54
Click To Buy

3/8" Air Ratchet

(CP886) 3/8" Air RatchetFeatures: Compact head design allows greater flexibility in tight areas Easy to grip reverse lever for simple directional changes Hardened gears allow greater durability over other economically priced ratchets Applications: installing or removing spark plugs, radiators, water pumps, and exhaust systems Ultimate torque: 50 ft.-lb. Specifications: Square Drive in.: 3/8 Weight lb.: 2-1/4 Length in.: 10-1/4 Average Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Speed rpm: 160 Working Torque Range ft.-lb. (Nm): 10-50

$64.41
Click To Buy

Heavy Duty 1" Impact Wrench

(CP893) Heavy Duty 1" Impact WrenchFeatures: Power regulator to match torque to the job. Movable dead handle adjusts for operator comfort. High output motor generates high torque levels. Variable speed trigger for precise control. Applications: truck springs, tractor pads, off road equipment, etc. Ultimate Torque: 1400 ft.-lbs. Specifications: Square Drive: 1"" Weight: 23 lb. (10.5 kg) Length: 11�??"" (295mm) Avg. Air Consumption: 10�?� CFM Air Inlet NPTF in.: 3/8 Min. Hose Size: 1/2"" (13mm) Sound dBA Pressure: 97.8 (107.8 Power) Vibration: 9.4 m/s�?? Working Torque Range: 200-710 ft.-lb. (272-1234Nm) Ult. Torque @ 90 PSI Reverse: 1400 ft.-lb. (1900 Nm)

$748.19
Click To Buy

Extra Heavy Duty 1" Impact Wench

(CP897-6) Extra Heavy Duty 1" Impact WenchFeatures: Lightest 1"" in line 1916S. Convenient reverse valve for easy directional change. High performance motor maximizes output while minimizing air consumption. Teasing throttle for easy bolt starting. Applications: service tucks, high volume truck tire shops. Ultimate Torque: 1300 ft.-lbs. Specifications: Square Drive: 1"" Weight: 19 lb. (8.6 kg) Length: 19-3/4"" (502 mm) Avg. Air Consumption: 6.2 CFM Air Inlet NPTF: 1/2"" Min. Hose Size: 1/2"" (13 mm) Sound dBA Pressure: 105 (115 Power) Vibation: 6.3 m/s�?? Working Torque Range: 150-800 ft.-lb. (200-1065 Nm) Ult. Torque @ 90 PSI Fwd/Rev:1300 ft.-lb. (1780 Nm)

$580.47
Click To Buy

Deluxe A/C Compressor Clutch Tool Kit

(CPSCTK1300A) Deluxe A/C Compressor Clutch Tool KitFeatures: Combo installer/remover tools Service manual with ID chart, air gaps, and torque specs included. FREE Universal Spanner Wrench included. Removes/Installs: GM R4, A6 SAE; GM V5, DA6 HRG Metric; Ford FS6/Chrysler C171; Hitachi MJ/Tecumseh; Nippondenso 6P/10P. Also Removes: Sanden SD 5 & 7; Zexel (Diesel Kit)

$81.61
Click To Buy

The Eliminator - Electronic Refrigerant Leak Detector

(CPSLS3000) The Eliminator - Electronic Refrigerant Leak DetectorFeatures: Fully automatic electronic refrigerant leak detector for all HFC, HCFC, CFC, SF6 gasses & blends. Exclusive POWERSHIFT software automatically monitors, controls & adjusts all critical instrument settings to ensure maximum leak search results under any job environment. Two separate visual LED displays enables user to pinpoint the exact location of leak source & the approximate size of that leak. TECHNICAL SPECIFICATIONS: SENSOR TYPE - Cold Cathode Diode: Patented design allows fast, accurate detection of refrigerant leaks maintaining maximum sensitivity throughout the life of the sensor. Highly resistant to background contaminants including heavy condensation, oils, leak solutions, brake oils, radiator coolants, washer fluids, etc. SENSITIVITY - Fully automatic selection allowing detection of a 0.25oz/yr (7g/yr) leak rate of HFC. LEAK INDICATION - Audible Alarms: Two user-selectable audible alarm option (HIGH and LOW intensity) TACHOMETER VISUAL DISPLAY - Tachometer-like bar graph display: Eight high intensity LEDs GEARSHIFT VISUAL DISPLAY - Arranged in a gearshift pattern, 7 LEDs indicate the current sensitivity range of the unit and subsequent leak size FLEX PROBE - 14""/35.5cm long, 0.25""/6.4mm diameter OPERATING TEMP - 0 to 140�??F / -18 to 60�??C POWER - 75 hours battery life using three size ""C"" alkaline batteries. Auto OFF after 10 minutes of inactivity. LOW BATTERY INDICATOR - Right most LED on Tachometer display illuminates to indicate low battery condition. WEIGHT -1lb 2oz / 500g WARRANTY - 2 years excluding sensors and batteries

$227.58
Click To Buy

Leek-Seeker Microcomputer Controlled Refrigerant Leak Detector

(CPSLS790B) Leek-Seeker Microcomputer Controlled Refrigerant Leak DetectorFeatures: �? Detects all refrigerant and blends -R12, R22, R502, R123, R134a 18"" Flex probe with exclusive patented Ion-Pump advanced corona discharge technology sensor. Ten sensitivity levels Visual and audible leak location and intensity indicators Patented selective Water Vapor Filter allows operation in damp enviroments and checking evaporator leaks Exceeds SAE J1627 moving probe specifications Made in the U.S.A. 2 year manufacturer''s warranty

$190.92
Click To Buy

R12 and R134a Pro-Set Aluminum Block Manifold Gauge Set with Hoses

(CPSMA1234) R12 and R134a Pro-Set Aluminum Block Manifold Gauge Set with HosesFeatures: Rugged diaphragm valves Easy one full turn open & close valves Anodized aluminum block body Oversized optical sightglass 1/4"" chrome R134a field service couplers 1/4"" - 1/2"" ACME vacuum pump adaptor Premium 72"" hoses - all refrigerant type Made in U.S.A.

$159.64
Click To Buy

R134a Pro-Set Aluminum Block Manifold Gauge Set with Hoses

(CPSMA134) R134a Pro-Set Aluminum Block Manifold Gauge Set with HosesFeatures: Rugged diaphragm valves Easy one full turn open & close valves Anodized aluminum block body Oversized optical sightglass Brass field service couplers Premium 72"" hoses - SAE J2196 Made in U.S.A.

$146.52
Click To Buy

R134a Economy Manifold Gauge Set

(CPSMB34) R134a Economy Manifold Gauge SetFeatures: Forged brass body Optical sightglass Charging hosed with shut-offs Push-on quick couplers Ball valve shut-offs meet EPA standards

$117.74
Click To Buy

R134a Oil/Dye Injector

(CPSTLJ4) R134a Oil/Dye InjectorFeatures: Install on low side of manifold 2 oz. capacity Anodized aluminum body with ball valve Compatible with all oils and dyes 1/2"" ACME

$38.30
Click To Buy

3 CFM 1/3 Hp Single Stage Vacuum Pump

(CPSVP3S) 3 CFM 1/3 Hp Single Stage Vacuum PumpFeatures: Multi-voltage operation - the vacuum pump can be quickly converted to 115 or 230-volt operation. Sure grip handle - ergonomically designed for portability. Solid rubber base for improved shock resistance. Air cooled motors for operating under high temperature conditions. Ultimate vacuum ratings of 75 microns. Double intake - connections 1/4"" SAE and 3/8"" SAE male flare ports for use with mobile or stationary systems. Oil drain port - for easy vacuum pump oil maintenance. Vacuum pump oil level sight glass.

$166.35
Click To Buy

6 CFM 1/2 Hp Single Stage Vacuum Pump

(CPSVP6S) 6 CFM 1/2 Hp Single Stage Vacuum PumpFeatures: Multi-voltage operation - the vacuum pump can be quickly converted to 115 or 230-volt operation. Sure grip handle - ergonomically designed for portability. Solid rubber base for improved shock resistance. Air cooled motors for operating under high temperature conditions. Ultimate vacuum ratings of 75 microns. Double intake - connections 1/4"" SAE and 3/8"" SAE male flare ports for use with mobile or stationary systems. Oil drain port - for easy vacuum pump oil maintenance. Vacuum pump oil level sight glass.

$217.95
Click To Buy

Dynamometer Exhaust Hose - 4"

(CRUACT400DYNO) Dynamometer Exhaust Hose - 4"Features: The DYNO series of exhaust hose is made of a blend of rubber that can withstand the high temperature of a dynamometer when used with a fan-assisted system. Heavy wall thickness increases durability To prolong the life of the hose, always use an adapater and allow the hose to cool after each use

$156.21
Click To Buy

Oval Adapter for 4" Dynamometer Exhaust Hose

(CRUF475DYNO) Oval Adapter for 4" Dynamometer Exhaust HoseFeatures: Accomodates twin 2"" tailpipes Higher temp resistance than standard Crushproof exhaust adapters Includes chain and hook 3""x6"" oval x 10"" long Threads into 4"" hose Probe hole for dynamometer testing

$39.38
Click To Buy

Exhaust Hose - 2.5"x11 Ft.

(CRUFLT250) Exhaust Hose - 2.5"x11 Ft.Features: Premium quality exhaust hose - the company''s name says it all Flarelock design allows two hoses to be joined together or a damaged hose to repaired by splicing Proven to resist temperatures up to 600 degrees Farenheit

$66.16
Click To Buy

Exhaust Hose - 3"x11 Ft.

(CRUFLT300) Exhaust Hose - 3"x11 Ft.Features: Premium quality exhaust hose - the company''s name says it all Flarelock design allows two hoses to be joined together or a damaged hose to repaired by splicing Proven to resist temperatures up to 600 degrees Farenheit

$80.69
Click To Buy

Exhaust Hose - 4"x11 Ft.

(CRUFLT400) Exhaust Hose - 4"x11 Ft.Features: Premium quality exhaust hose - the company''s name says it all Flarelock design allows two hoses to be joined together or a damaged hose to repaired by splicing Proven to resist temperatures up to 600 degrees Farenheit

$130.41
Click To Buy

Crescent 170-Piece Mechanic�?s Tool Set

(CSTCTK170CMP) Crescent 170-Piece Mechanic�?s Tool SetFeatures: Contains all the tools needed for most industrial applications, including 1/4"", 3/8"", and 1/2"" quick-release ratcheting drives, with a wide selection of standard and deep sockets in the most common SAE and metric sizes. Features 72-tooth ratchet drives for a 5�?? swing that�?s perfect in tight spaces. 3/8"" drive 12-point sockets to increase fastener contact area for maximum torque. Durable storage cases have raised-letter ID for each tool location, so they�?ll stay organized, plus tools lock securely in place, a true benefit for work vehicles or other places where tools get knocked around. All tools in this set meet stringent new ANSI and ASME specifications and come with a full satisfaction guarantee. Set Includes: (3) Drivers (1/4"", 3/8"", 1/2"") (4) Extenders, (1) 3/8"" TO 1/4"" DRIVE ADAPTER (22) 1/4"" Sockets (12) Deep/24 Sockets) 3/8"" Sockets (10) 1/2"" Sockets (2) Spark Plug Sockets 5/8 & 13/16 (1) 8"" Adjustable, (1)10"" T&G, (1) 8"" Long Nose Pliers (1) Magnetic Bit Driver and (40) Bits, (4) plastic holders (4) Mag Screwdrivers, (24) Hex Keys (SAE/Metric), (2) plastic holders (12) Combination wrenches (5/16"",3/8"",7/16"",1/2"",9/16"",5/8"",8MM,10MM,12MM,13MM,14MM,15MM) (1) Storage Case

$105.14
Click To Buy