The Store

The Repair 104 Auto/Boat/Plane Section

Stinger Punch & Chisel Set - 16 Pc.

(OTC4600) Stinger Punch & Chisel Set - 16 Pc.Features: Durable set of heat-treated chrome vanadium steel punches and chisels. Storage tray included. Includes: 3 - Cold chisels (with gauge): 3/8"" x 5-1/2""; 1/2"" x 6""; 5/8"" x 6-1/2"" 2 - Center punches: 1/8"" x 5""; 3/16"" x 6"" 5 - Pin punches: 3/32"" x 4-1/4""; 1/8"" x 4-3/4""; 5/32"" x 5""; 3/16"" x 5-1/4""; 1/4"" x 5-3/4"" 5 - Taper punches: 3/32"" x 5-1/4""; 1/8"" x 5-3/4""; 5/32"" x 6""; 3/16"" x 6-1/4""; 1/4"" x 6-3/4""

$22.58
Click To Buy

Power Steering Pump/Alternator Remover/Installer Tool

(OTC4681) Power Steering Pump/Alternator Remover/Installer ToolFeatures: Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys. Also removes and installs other press-fit pulleys with a hub diameter of 1-1/8"" (28mm), 1-1/4"" (32mm), 1-5/16"" (34mm), or 1-3/8"" (35mm).

$30.16
Click To Buy

Two Ton Service Jack

(OTC5202) Two Ton Service JackFeatures: Unique, Innovative design featuring: New ""OTC Family"" look Ergonomic handle for user comfort and easy mobility. CE marked-ASME/PALD tested. Foot pedal for quick approach of the lifting saddle to load. Built-in tray for fasteners and tools. Polyamide wheels are superior to cast wheels due to their high mechanical strength and durability: - Tensile and virtually indestructible to usual impact, and bending stress - Demonstrate exceptional resistance to wear and tear - Will not damage garage floors, do not rust, and are quiet in operation. Capacity: 2 - ton Overall Length: 34 - 5/8"" Overall Height: 14 - 3/6"" Min. Height: 3"" Max Height: 18 - 1/4"" Weight: 70.5 lbs.

$283.74
Click To Buy

3-Ton Service Jack

(OTC5203) 3-Ton Service JackFeatures: Unique, Innovative design featuring: New ""OTC Family"" look Ergonomic handle for user comfort and easy mobility. CE marked-ASME/PALD tested. Foot pedal for quick approach of the lifting saddle to load. Built-in tray for fasteners and tools. Polyamide wheels are superior to cast wheels due to their high mechanical strength and durability: - Tensile and virtually indestructible to usual impact, and bending stress - Demonstrate exceptional resistance to wear and tear - Will not damage garage floors, do not rust, and are quiet in operation. Capacity: 3 - ton Overall Lentgh: 45 - 3/4"" Overall Width: 14 - 3/6"" Min. Height: 5 - 1/2"" Max. Height: 20 - 3/4"" Weight: 110 lbs.

$425.64
Click To Buy

Hail Dent Inductor Accessory for Magnetic Induction Heater

(OTC543036) Hail Dent Inductor Accessory for Magnetic Induction HeaterFeatures: Induce electromagnetic field that expands metal and removes dent.

$232.83
Click To Buy

24 Pc. PolyDrive Bit with Socket Set

(OTC5909) 24 Pc. PolyDrive Bit with Socket SetFeatures: The bit pattern known as ""RIBE"" or ""polydrive"" is now used on most European cars and light trucks, and is fast becoming more common with U.S. manufacturers. Packaged in a metal box, this is the largest collection of RIBE bits on the market. Includes long R4 to R14 RIBE, and short R4 to R14 RIBE bits, plus 1/2"" and 3/8"" drive socket bit holders.

$25.79
Click To Buy

OTC Bulletproof Torx Bit Socket 12 Piece Set - T10-T60

(OTC6100) OTC Bulletproof Torx Bit Socket 12 Piece Set - T10-T60Features: Durability guaranteed. Made of the finest heat-treated steel.

$29.01
Click To Buy

Universal Brake Caliper Bit Socket Set - 9 Pc.

(OTC6135) Universal Brake Caliper Bit Socket Set - 9 Pc.Features: Set includes 9 bit sockets: T40 - T60; 7mm - 10mm, 1/4"" hex; 3/8"" hex

$24.50
Click To Buy

Bulletproof External Torx Socket Set - 7 Pc.

(OTC6150) Bulletproof External Torx Socket Set - 7 Pc.Features: OTC''s Bulletproof Torx sockets are made from superior S2 steel. Set includes: E6, E7, E8 - 1/4"" drive sockets; E10, E12, E14, E16 - 3/8"" drive sockets

$20.32
Click To Buy

OTC Bulletproof Torx Plus Bit Socket 9 Piece Set - TP10-TP50

(OTC6180) OTC Bulletproof Torx Plus Bit Socket 9 Piece Set - TP10-TP50Features: Less pointed than standard Torx fasteners, these are the only bits for replacing the new Torx Plus fasteners. Durability guaranteed Made of the finest heat-treated steel Set includes sizes from TP10 to TP50 with 1/4"" and 3/8"" drive

$29.88
Click To Buy

Ford Cam Sensor Synch Tool

(OTC6469) Ford Cam Sensor Synch ToolFeatures: Applications include: 1997-2002 Econoline (4.2L V6), 1997-2002 F-Series Truck (4.2L V6), 1996-1998 Explorer (5.0L V8), 1996-1998 Mountaineer (5.0L V8), 1996-1998 Mustang (3.8L V6), 1997 Thunderbird (3.8L V6), 1997 Cougar (3.8L V6), and 1996-1998 Windstar (3.8L V6). Ford Tool Part No.: T96T-12200-A Global Part No.: 303-562

$30.32
Click To Buy

Ford Cam Sensor Synch Tool

(OTC6472) Ford Cam Sensor Synch ToolFeatures: Applications include: 1995-1997 Aerostar (3.0L V6), 1996-1998 Aerostar (4.0L V6), 1996-1998 Explorer (4.0L V6), 1995-1997 Ranger (3.0L V6), 1996-1998 Ranger (4.0L V6), 1996-1997 Taurus (3.0L V6 2-Valve), 1996-1997 Sable (3.0L V6 2-Valve), and 1995-1997 Windstar (3.0L V6). Ford Tool Part No.: T95T-12200-A Global Part No.: 303-529

$30.32
Click To Buy

9 Pc. Quick Disconnect Tool Set

(OTC6517) 9 Pc. Quick Disconnect Tool SetFeatures: Designed for A/C lines, fuel lines, and transmission cooler lines. Contains 3/8"", 1/2"", 5/8"", and 3/4"" spring lock disconnect tool for A/C lines on 1981 thru 2003 Ford cars and trucks, 1994 thru 2003 Chrysler and Jeep vehicles. Contains the 3/8"" and 1/2"" fuel line disonnect tool for Ford vehicles. Contains the 5/16"" and 3/8"" fuel line disconnect tools for GM and Chrysler vehicles. Contains the transmission oil cooler line disconnect tool used on many GM and Ford vehicles.

$25.79
Click To Buy

Harmonic Balancer Puller

(OTC6667) Harmonic Balancer PullerFeatures: Improved With More Applications Designed for removing damper pulleys in tight engine compartments without removing the radiator. GM 2000 Generation III 4.8L, 5.3L 6.0L , and 8.1L V8s. Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988. Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5L I5 and 2005-current 2.8L 14. Chrysler engines from 1990-later, including 2.0L, 2.4L-4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s. Ford 1995-later V8 engines with 3 spoke pressed on damper. Mitsubishi Eclipse 1995-1999 2.0L DOHC non-turbo. Kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8"" square drive for ratchet use, and a 3/4"" hex for wrench or socket use.

$66.76
Click To Buy

Euro Door Hinge & Handle Adjusting Kit

(OTC6785) Euro Door Hinge & Handle Adjusting KitFeatures: This kit contains the tools needed to service most door hinges and door handles on Audi, Mercedes-Benz, Porsche, and Volkswagen vehicles. Kit includes : A ratchet wrench with three 12-point bits (4 mm, 8 mm, 10 mm) and two T45 TORX bits; a T30 TORX long handled driver; and a T20 TORX T-handle driver.

$32.06
Click To Buy

Ford F-150 Spark Plug Socket

(OTC6900) Ford F-150 Spark Plug SocketFeatures: This unique and patented design works on 2004-newer Ford F-150 pickup trucks with 5.4L 3-valve Triton V-8 engines. Socket end is 9/16"" Soft rubber insert holds and protects spark plug during removal and installation. Extension is part of the socket. Easily fits down spark plug tube in cylinder head. Socket has 3/8"" drive for use with a ratchet or breaker bar.

$19.18
Click To Buy

Universal Tie Rod Adjusting Tool

(OTC7023) Universal Tie Rod Adjusting ToolFeatures: Permits 360 degree rotation of sleeve for required adjustment. Four-position feature lets you locate tool to grip sleeve properly, even when access is limited. Universal - services most models of compact and standard-size passenger cars and light trucks. Same as Ford No. T79P-3283-A Wt. 13 oz.

$28.25
Click To Buy

Clutch Adjusting Wrench for Spicer Clutches

(OTC7028) Clutch Adjusting Wrench for Spicer ClutchesFeatures: For Spicer-built Heavy-Duty Clutches This easy-to-use clutch adjusting wrench will solve the difficult, time-consuming job of internal adjustment of Spicer angle-spring and multiple lever clutches found on nearly 50% of all heavy-duty trucks. Until now, a pry bar or other makeshift method was used and often resulted in damage to parts, poor job performance and excessive downtime. Wt. 1 lb. 8 oz.

$32.07
Click To Buy

Disc Brake Pad Spreader

(OTC7034) Disc Brake Pad SpreaderFeatures: No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed, then expands to retract the piston. Leaves both hands free to start the caliper over the rotor. After it''s started, the spreader is removed and you slide the caliper over the rotor the rest of the way. Cuts installation time dramatically. Works on all standard and four-piston caliper disc brakes.

$30.95
Click To Buy

Ball Joint Spanner Wrench

(OTC7080) Ball Joint Spanner WrenchFeatures: Designed for removal and installation of ball joint adjusting sleeves on 1/2-, 3/4-, and 1-ton Dana open yoke front axles found on Ford, GM, Chrysler, IHC and Jeep 4WD vehicles. Tool permits easy torquing with 1"" socket for proper upper ball joint preload. Same as Ford No. T71T-3010-G

$20.64
Click To Buy

FW Bearing Locknut for GM Trucks

(OTC7090A) FW Bearing Locknut for GM TrucksFeatures: Applications: 1973-1981 GM 3/4 and 1 ton 4WD trucks.

$29.76
Click To Buy

Truck Front Wheel Bearing Locknut Socket

(OTC7158) Truck Front Wheel Bearing Locknut SocketFeatures: Applications: 19851/2-1995 Ford F-series H.D. 3/4 and 1 ton Dana 50 IFS or Dana 60 front axle 1985-1995 Ford F-series 1/2 ton truck and full size Bronco with Dana 28 front axle 1982-1990 GM H.D. 3/4 and 1 ton trucks

$22.58
Click To Buy

30" Jimmy Bar - 7/8" Diameter

(OTC7168) 30" Jimmy Bar - 7/8" DiameterFeatures: Forged from chrome alloy steel and heat-treated to resist bending and breaking

$30.75
Click To Buy

A/C Spring Lock Coupling Tool Set

(OTC7238) A/C Spring Lock Coupling Tool SetFeatures: These tools provide the only means of separating spring lock air conditioning refrigerant pressure lines on 1981-current Ford vehicles and 1994 and newer Chrysler and Jeep vehicles. They are spring-loaded in the closed position to deflect any spray that occurs when the line is disconnected. Includes: 3/4in. 3/8in. 1/2in. and 5/8in.

$24.33
Click To Buy

Front Wheel Bearing Locknut Socket

(OTC7270A) Front Wheel Bearing Locknut SocketFeatures: 1984-1992 Ford Ranger & Bronco II with manual hubs 1986-1995 Ford F-series 1/2 ton truck and full size Bronco with Dana 44 front axle 1990-1993 Dodge trucks with Dana 44 automatic hubs

$28.83
Click To Buy

Proportioning Valve Depressor for ABS Brake Systems

(OTC7853) Proportioning Valve Depressor for ABS Brake SystemsFeatures: Proper service procedure requires that a proportioning valve depressor on the 4WAL unit when pressure bleeding the brake system. For best results on 4WAL, use two of these depressors, one for each valve. Services a wide variety of GM utility vehicles, vans, and pickups with Kelsey Hayes anti-lock brake systems. Also works on RWAL systems and must be installed on the proportioning valve (only one depressor required for RWAL). This tool supersedes Kent Moore No. J-35856.

$27.41
Click To Buy