The Store

The Repair 113 Auto/Boat/Plane Section

5 Piece SAE S-Style Wrench Set

(SUN9940) 5 Piece SAE S-Style Wrench SetFeatures: Curved design for maximum access in confined areas Canvas pouch included Fully polished drop forged alloy steel Includes 5/16""x3/8"", 7/16""x1/2"", 9/16""x19/32"", 5/8""x11/16"", 11/16""x3/4"" Lifetime warranty

$18.76
Click To Buy

5 Piece Metric S-Style Wrench Set

(SUN9940M) 5 Piece Metric S-Style Wrench SetFeatures: Curved design for maximum access in confined areas Canvas pouch included Fully polished drop forged alloy steel Includes 10mmx11mm, 12mmx13mm, 14mmx15mm, 16mmx17mm, 18mmx19mm Lifetime warranty

$18.76
Click To Buy

5 Piece SAE 10 Degree Offset Wrench Set

(SUN9945) 5 Piece SAE 10 Degree Offset Wrench SetFeatures: Canvas pouch included Fully polished drop forged alloy steel Includes 3/8""x7/16"", 1/2""x9/16"", 5/8""x11/16"", 3/4""x13/16"", 7/8""x1"" Lifetime warranty

$24.74
Click To Buy

5 Piece Metric 10 Degree Offset Wrench Set

(SUN9945M) 5 Piece Metric 10 Degree Offset Wrench SetFeatures: Canvas pouch included Fully polished drop forged alloy steel Includes 10mmx11mm, 12mmx14mm, 13mmx15mm, 16mmx18mm, 17mmx19mm Lifetime warranty

$21.48
Click To Buy

Mini Air Die Grinder - 1/4"

(SUNSX231) Mini Air Die Grinder - 1/4"Features: Collet size 1/4"" 25,000 RPM Front exhaust keeps grinding surface clean for visibility Built-in air inlet allows for greater access in restricted areas Safety lever throttle for positive speed control Built-in speed regulator Ball bearing construction for long tool life

$23.03
Click To Buy

5" High Speed Sander

(SUNSX265) 5" High Speed SanderFeatures: Built-in regulator for positive speed control Compact, lightweight for ease of handling Contoured trigger housing for extra control Includes three backing pads: 3"", 4-1/2"", 5-1/2"" Specifications: Free speed: 16,000 RPM Air inlet: 1/4"" NPT Air consumption: 5 CFM Length: 8-1/4"" Height: 2"" Weight: 2-3/5 lbs.

$33.64
Click To Buy

Handheld Rechargeable 18V Cordless Power Vacuum

(SVC5791800) Handheld Rechargeable 18V Cordless Power VacuumFeatures: The power you come to expect from ShopVac now in a rechargeable, portable vacuum. Used alone or with the included accessories, the portability, power, versatility, and easy of use make this one great tool! Operation Sound Level: Quiet Hose Size: 1.25"" Diameter Warranty: 2 Years Dry Pickup Only Wall Mountable Charger/Strorage Design Hand Held Design Included Accessories: Wall mounted charger 4'' x 1.25"" Hose Gulper nozzle Crevice tool Round brush Multi-Purpose Floor Nozzle Long Extension Wand

$98.62
Click To Buy

3 Pc. BRASS DRIFT PIN SET

(TA14270) 3 Pc. BRASS DRIFT PIN SETFeatures: Contains 3 sizes of drift pin style brass punches: 1/2"" x 7"", 5/8"" x 7"" and 3/4"" x 8"". Softer brass will not mar harder metal surfaces. Non-Sparking. Knurled handles for better gripping.

$22.85
Click To Buy

Spark Plug Cleaner

(TA18500) Spark Plug CleanerFeatures: Cleans any size spark plug quickly and effortlessly with internally controlled abrasive blasting. Uses ordinary air line pressure. Compressed air flows through special venturi mixing with abrasive to thoroughly clean spark plugs like new. Lever valve on outside of unit allows for blasting with abrasive/air mix or pure air only. Abrasive material is included and is silica free. Recommended air line pressure is 70-80 PSI; maximum 90 PSI. Instructions provided.

$26.30
Click To Buy

Professional Ratcheting Terminal Crimper

(TA18900) Professional Ratcheting Terminal CrimperFeatures: Racheting action ensures a perfect crimp every time. Eliminates damaged or distorted terminals. Crimps 10-22 gage insulated terminals. Superior design and construction outperforms other crimpers. Replaceable crimping jaws.

$21.27
Click To Buy

1/4" Super Duty Riveter

(TA19800) 1/4" Super Duty RiveterFeatures: 2 1/4"" nose reach for standard use Easily sets five sizes of aluminum and steel rivets: 1/8"", 5/32"", 3/16"", 7/32"" and 1/4"". Versatile and easy to use Long handles for greater leverage Comfortable handle grips Metal construction and simple design with few moving parts to ensure years of service Lightweight plastic bottle catches rivet stems. Nosepieces thread into handles for convenient storage

$25.95
Click To Buy

Extra Long Heavy Duty Circuit Tester

(TA27130) Extra Long Heavy Duty Circuit TesterFeatures: Specially designed to enable technician to test hard to reach circuits that would not be accessible with standard Circuit Testers. Use to test around hot engine components and under the dasboard. Features extra long, colored, insulated probe and 6'' of tough, flexible wire covered with heavy rubber insulation. Over 7"" of exposed probe length. Insulated probe eliminates accidental grounding. For 6 and 12 volt systems. Has heavy duty ground clip. Wire is retained in spring supported strain relief designed to withstand the most rugged use. Bulb is easily replaced.

$18.45
Click To Buy

7" Heavy Duty Automotive Logic Probe

(TA28000) 7" Heavy Duty Automotive Logic ProbeFeatures: A modern circuit tester with time tested durability. Quickly and safely tests high and low voltages (power and ground) on all vehicles, including computerized engine and body controls. Tests 6, 12, and 24 volt systems High impedance - current draw less than 18 milliamps to protect sensitive electronic sensors, microprocessors, electronic ignition components and air bags. Dual color LED indicates red for power (high) and green for ground (low) 6'' heavy duty, 18 gage dual leads with large battery clips Leads can be attached regardless of polarity Includes Protect-A-Terminal probe adapter to prevent damage to electrical connectors Can be used as a standard, single circuit tester. Instructions included.

$24.32
Click To Buy

3" Heavy Duty Automotive Logic Probe

(TA28100) 3" Heavy Duty Automotive Logic ProbeFeatures: A modern circuit tester with time tested durability. Quickly and safely tests high and low voltages (power and ground) on all vehicles, including computerized engine and body controls. Tests 6, 12, and 24 volt systems High impedance - current draw less than 18 milliamps to protect sensitive electronic sensors, microprocessors, electronic ignition components and air bags. Dual color LED indicates red for power (high) and green for ground (low) 6'' heavy duty, 18 gage dual leads with large battery clips Leads can be attached regardless of polarity Includes Protect-A-Terminal probe adapter to prevent damage to electrical connectors Can be used as a standard, single circuit tester. Instructions included.

$24.46
Click To Buy

Noid Light Set

(TA36330) Noid Light SetFeatures: Quickly, easily and economically test electronic fuel injection signals. Supplied with lights to check GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI. Easy to use - just disconnect the wiring to the fuel injectors, install the Noid Light into the injector wiring harness and crank or start the engine to view the light pattern.

$29.22
Click To Buy

GM TBI Fuel Injection Pressure Tester Adapter

(TA37650) GM TBI Fuel Injection Pressure Tester AdapterFeatures: This adapter is for use with Cat. Nos. 33770, 33900, 33950, 33980, 36100, 36150, 36200, 36250, 37450 and 37600. GM Inline Adapter - Replaces fuel filter with threads on both ends for Throttle Body Injection.

$20.05
Click To Buy

GM 2.2L FUEL INJ PRESSURE TEST

(TA37660) GM 2.2L FUEL INJ PRESSURE TESTFeatures: ADAPTER

$23.61
Click To Buy

The Strutter 2 MacPherson Strut Coil Spring Tool

(TA63000) The Strutter 2 MacPherson Strut Coil Spring ToolFeatures: Acme threads for easy use and additional strength. Clamshell packaging with a built in handle can be used to store the tool. One piece cold headed solid shaft of alloy steel. Complete instructions and safety kit.

$24.34
Click To Buy

Steering Wheel Holder and Pedal Depressor

(TA66400) Steering Wheel Holder and Pedal DepressorFeatures: Holds the steering wheel, brake pedal, accelerometer or clutch pedal in a desired position Saves time and money by eliminating the need for two technicians to do the job Easy to assemble, install and release - components slide into position Locks in place by putting pressure against the seat Virtually 100% coverage to fitt all cars and trucks between seat and steering wheel, seat and pedal Coated to prevent slipping and marring Comes in a blow molded case with instructions

$25.58
Click To Buy

Midi-Weight Slide Hammer Dent Puller

(TA81200) Midi-Weight Slide Hammer Dent PullerFeatures: Provides excellent balance with 5lb. slide weight on plated, solid, 5/8"" shaft. Exclusive soft cushion vinyl grip with ""Hang-It"" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb. Slugger slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8""-18.

$28.95
Click To Buy

Windshield Removal Kit

(TA87460) Windshield Removal KitFeatures: This kit contains the basic tools and wire needed for removing even the most modern windsheilds. Makes a difficult job easy - even on acutely angled windshields. Includes: Braided windsheild cut-out wire, starting tool for inserting wire, handles for cut-out wire. Supplied in durable vinyl pouch for display or tool box storage.

$31.01
Click To Buy

Spoon Dolly

(TA88175) Spoon DollyFeatures: The most popular body repair specialty tool. Combines all the contours and weight of a dolly with the reach and maneuverability of a spoon. Use for forming, prying and caulking in those hard to reach places.

$21.75
Click To Buy

12V-18V Bosch Compatible Adapter for Pro Charger and Crew Charger

(TCT10C-AD01) 12V-18V Bosch Compatible Adapter for Pro Charger and Crew ChargerFeatures: Adapters for other brands are available. Adapter is for use with the Procharger (TCT10C-AC01) and Crew Charger (TCT10C-AC02)

$22.48
Click To Buy

12V-18V Milwaukee Compatible Adapter for Pro Charger and Crew Charger

(TCT10C-AD04) 12V-18V Milwaukee Compatible Adapter for Pro Charger and Crew ChargerFeatures: Adapters for other brands are available. Adapter is for use with the Procharger (TCT10C-AC01) and Crew Charger (TCT10C-AC02)

$22.48
Click To Buy

6" Aluminum Oxide Bench Grinding Wheel - A36 Coarse

(THA611VAOC) 6" Aluminum Oxide Bench Grinding Wheel - A36 CoarseFeatures: For general purpose grinding of ferrous metals, such as steel, iron, forgings, moly, etc. These wheels are packaged individually Dimensions: Diameter - 6"", Thickness - 1"", Hole Size - 1"", Max RPM -4,138

$26.26
Click To Buy

Cylinder With End Cut Aluma-Cut Bur (non-ferrous cut)

(THA65038) Cylinder With End Cut Aluma-Cut Bur (non-ferrous cut)Features: Features wide teeth spacing, reduced clogging of teeth and are ideal for nonferrous/soft materials. Tomahawk Aluma-Cut or Non-Ferrous Burs are used for deburring softer non-ferrous metals and non-metallic materials. This design provides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber and most plastics. The wide clearance and end mill type geometry of the flutes promotes fast stock removal with minimum loading Dimensions: Size - 3/8"", Length of Cut - 3/4"", Shank - 1/4"", OAL - 2-1/2""

$19.45
Click To Buy