The Store

The Repair 12 Auto/Boat/Plane Section

Heavy Duty 3/8" VSR Drill with Keyless Chuck

(DEWD21009) Heavy Duty 3/8" VSR Drill with Keyless ChuckFeatures: All metal chuck for better durability 6 Amp motor offers more power than any unit in its class 3/8"" metal keyless chuck design offers better bit retention All ball bearing contruction provides greater durability and longer tool life Contoured textured handle provides better gripping surface and reduces user fatigue Built-in two way level for drilling accurate vertical and horizontal holes One year warranty Specifications: Chuck size: 3/8"" No load speed: 0-2,500 RPM Amps: 6.0

$76.92
Click To Buy

Heavy-Duty 4-1/2" (115mm) Small Angle Grinder

(DEWD28110) Heavy-Duty 4-1/2" (115mm) Small Angle GrinderFeatures: 7.0 Amp AC/DC, 11,000 rpm motor designed for faster material removal and higher overload protection. Quick-Change(TM) Wheel Release provides easier and quicker wheel removal without the need for a wrench. Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces. Oversized, protected spindle lock button provides easier and quicker wheel changes. 2 position removeable side handle provides increased comfort and control. Slim, ergonomic body design provides increased comfort in extended use applications. 5/8""-11 spindle thread accepts a wide range of 4-1/2"" accessories. Amps: 7.0 Amps Max Watts: Out 800 W No Load Speed: 11,000 rpm Use Wheels RPM: Above 12,000 rpm Spindle Lock: Yes Spindle Thread: 5/8""-11 Tool Length: 10-3/4 "" Tool Weight: 4.10 lbs

$72.55
Click To Buy

Heavy-Duty 4-1/2" (115mm) Small Angle Grinder

(DEWD28402) Heavy-Duty 4-1/2" (115mm) Small Angle GrinderFeatures: 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection. Dust Ejection System(TM) provides durability by ejecting dust particles that enter the tool through the air intake vents. Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces. One piece brush arm prevents brush hang-up due to dust ingress. Quick-Change(TM) Wheel Release provides easier and quicker wheel removal without the need for a wrench. Keyless adjustable guard provides tool free guard adjustment thus increasing productivity. Vibration reducing removable side handle provides user comfort and reduces user felt vibration. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Oversized, protected spindle lock button provides easier and quicker wheel changes. Paddle switch lock-off provides the user protection from accidental start up. Matching wheel flanges allow the use of common accessories. Amps: 10.0 Amps Max Watts Out: 1,200 W No Load Speed: 11,000 rpm Use Wheels RPM: Above 12,000 rpm Spindle Lock: Yes Spindle Thread: 5/8""-11 Tool Length: 11-1/4"" Tool Weight: 4.6 lbs Includes: two position side handle, depressed center wheel, and keyless adjustable guard wrench.

$108.14
Click To Buy

18V Cordless Reciprocating Saw Kit

(DEWDC385K) 18V Cordless Reciprocating Saw KitFeatures: 1"" stroke length and 2,900 spm for fast cutting. Keyless blade clamp allows quick blade change without touching blade or reciprocating shaft. Electric brake minimizes risk of blade breaking when exiting plunge cuts. Compact and lightweight; 7.1 lbs. Pivoting shoe with open top for maximum visibility. Blade can be reversed for flush and plunge cutting. Variable speed with trigger lock for increased blade control. Comes with: 1 hour charger 18V XR+ pack battery Reciprocating saw blade Heavy-duty molded storage case Specifications: Voltage: 18 V Keyless Blade Clamp: Yes Strokes/Min: 0-2,900 spm Stroke Length: 1 "" Electric Brake: Yes Tool Weight: 7.1 lbs

$256.23
Click To Buy

18V XRP Extended Run Battery

(DEWDC9096) 18V XRP Extended Run BatteryFeatures: High capacity XRP battery has 40% more run-time than standard batteries Powers entire DEWALT line of 18V tools allowing users to run multiple tools off of the same battery pack 18V NiCd battery, 2.4 Amp Hour

$103.54
Click To Buy

Heavy-Duty XRP 18V Cordless Drill/Driver

(DEWDC920KA) Heavy-Duty XRP 18V Cordless Drill/DriverFeatures: DEWALT built high power, high efficiency motor delivers maximum performance in all drilling and fastening applications XRP extended run-time batteries provide long run-time and battery life Patented 3-speed all-metal transmission matches the speed to the application for optimal performance Heavy-Duty 1/2"" axial locking chuck locks the sleeve to prevent bits from slipping and falling out Preferred ergonomics provides optimal balance, size, and weight Specifications Voltage: 18 V Max Power: 510 UWO No. Of Speed Settings: 3 Max RPM: 0-450/0-1,500/0-2,000 Clutch Settings: 22 Chuck Size: 1/2"" Chuck Type: Metal, Single Sleeve Axial Locking Tool Weight: 6.0 lbs

$343.44
Click To Buy

Heavy-Duty XRP 14.4V Cordless Drill/Driver Kit

(DEWDC930KA) Heavy-Duty XRP 14.4V Cordless Drill/Driver KitFeatures: DEWALT built high power, high efficiency motor delivers maximum performance in all drilling and fastening applications XRP extended run-time batteries provide long run-time & battery life Patented 3-speed all-metal transmission matches the speed to the application for optimal performance Heavy-Duty 1/2"" axial locking chuck locks the sleeve to prevent bits from slipping and falling out Superior ergonomics optimize balance, size, and weight Includes: 1 hour charger, (2) 14.4V XRP batteries, heavy-duty kit box Specifications: Voltage 14.4 V Max Power 335 UWO # of Speed Settings 3 Max RPM 0-450/0-1,450/0-1,800 Clutch Settings 22 Chuck Size 1/2 "" Chuck Type metal, single sleeve axial locking Tool Weight 5.3 lbs

$259.94
Click To Buy

1/2" VSR Drill with Side Handle

(DEWDW236) 1/2" VSR Drill with Side HandleFeatures: Helical-cut steel, heat treated gears for increased durability and long gear life Metal gear housing for increased durability Rubber grip and two-finger trigger for increased comfort 360 degree side handle for greater control Keyless chuck for quick bit change Specifications: AMPS: 7.8 Max. watts out: 600W Keyless chuck: Yes Spindle lock: Yes No load speed: 0-850 RPM Gear reduction: Double Capacity in Wood: Spade bit 1-1/2"", Self-feed 2-1/8"", Hole saw 3-1/2"", Auger bit 1-1/8"" Capacity in Steel: Twist bit 1/2"", Hole saw 1-1/2"" Tool weight: 4.2 lbs. Shipping weight: 5.5 lbs.

$158.48
Click To Buy

1/2" Heavy-Duty Electric Impact Wrench with Hog Ring Retainer

(DEWDW293) 1/2" Heavy-Duty Electric Impact Wrench with Hog Ring RetainerFeatures: Delivers full power; 325ft. lbs. of torque in forward and reverse. Hog ring anvil for secure socket retention. AC/DC forward/reverse rocker switch. Soft grip handle for superior ergonomics. Ball-bearing construction for increased durability. Specifications: No Load Speed: 2,100 rpm Max. Torque: 325 ft-lbs Impacts/Min: 2,700 bpm Tool Length: 11 "" Tool Weight: 7 lbs Amps: 8.3 Amps

$202.80
Click To Buy

4 Position Heavy-Duty Reciprocating Saw

(DEWDW304PK) 4 Position Heavy-Duty Reciprocating SawFeatures: 4 Position Blade Clamp allows for flush cutting and increased versatility. Powerful 10.0 Amp motor designed for heavy-duty applications. Lever-action keyless blade clamp for quick and easy blade changing. 0-2,800 strokes per minute and 1-1/8"" stroke length deliver fast cutting. Variable speed trigger provides improved control. Includes: Metal Cutting Blade. Heavy-Duty Box.

$125.57
Click To Buy

6" Bench Grinder

(DEWDW756) 6" Bench GrinderFeatures: Powerful 5/8 HP induction motor for heavy-duty grinding operations Rugged cast-iron base and motor housing provide durability and prolong life Motor runs at 3,450 rpm for high speed material removal Precision-machined aluminum tool rests allow the user to accurately position work Specifications: AMPS (120V AC): 4.0 HP: 5/8 No load speed: 3,450 RPM Wheel diameter: 6"" Spindle diameter: 1/2"" Adjustable tool rests: Yes Tool length: 15"" Tool weight: 28.5 lbs.

$99.27
Click To Buy

8" Bench Grinder

(DEWDW758) 8" Bench GrinderFeatures: 3/4 HP induction motor provides superior power for industrial grinding applications Rugged cast-iron base and motor housing provide durability and prolong life Motor runs at 3,600 RPM for high speed material removal Precision machined aluminum tool rests allow the user to accurately position work Specifications: AMPS (120V A/C): 4.2 HP: 3/4 No load speed: 3,600 RPM Wheel diameter: 8"" Spindle diameter: 5/*"" Adjustable tool rests: Yes Tool length: 16"" Tool weight: 39.5 lbs.

$145.10
Click To Buy

7" Angle Grinder

(DEWDW840) 7" Angle GrinderFeatures: 13.0 Amp motor, 8,000 rpm provides high power and speed for 7"" grinding applications AC/DC capacity works off welding machines and generators for increased productivity and versatility High power-to-weight ratio for greater efficiency and reduced user fatigue Rear handle design for greater comfort and control External brush doors for easy servicing Spindle lock for quick and easy wheel changes Comes with depressed center wheel, wrench, backing, flange, clamp nut, guard, 2 position side handle Specifications: Amps 13.0 AC/DC Amps No Load Speed 8,000 rpm Spindle Lock Yes Spindle Thread 5/8""-11

$153.47
Click To Buy

7"/9" Electronic Sander/Polisher Variable Speed

(DEWDW849) 7"/9" Electronic Sander/Polisher Variable SpeedFeatures: Powerful, 8.0 Amp, all ball-bearing construction for long life Electronic module maintains specified speed even under load Conveniently-located variable speed dial lets user set maximum speed from 1,000 to 3,000 for different materials and applications Variable speed trigger allows user to instantly control speed from 0 to dialed setting Heat-treated, precision-cut gears for smooth operation External brush caps for easy servicing Spindle lock for easy pad changing Includes: 2 position side handle, rubber backing pad, clamp nut. Specifications: Amps 8.0 AC Amps Max Watts Out 1,400 W No Load Speed 0-1,000/0-3,000 rpm Spindle Thread 5/8""-11 Spindle Lock Yes Tool Length 17.3 "" Tool Weight 8.25 lbs

$188.28
Click To Buy

7.2V - 18V Dual Port 1 Hour Battery Charger

(DEWDW9216) 7.2V - 18V Dual Port 1 Hour Battery ChargerFeatures: Charges all DEWALT 7.2V - 18V batteries (except Univolt batteries) so users need only one charger for multiple cordless products Charges two batteries in 1 hour or less thus minimizing down time The DEWALT 3-stage charging system provides maximum run-time and extends overall life of the battery Battery thermal protection system prevents charging batteries that are too hot or too cold which would cause damage to the battery and a loss of run-time Diagnostics with LED indicator are 5 indicators to communicate battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold.

$94.11
Click To Buy

Heavy-Duty 3/8" 18V Cordless Right Angle Drill/Driver Kit

(DEWDW960K-2) Heavy-Duty 3/8" 18V Cordless Right Angle Drill/Driver KitFeatures: 3/8"" keyless ratcheting chuck. 2 speed ranges 0-500/0-1,500 rpm. 310 in.-lbs. of maximum torque for turning large bits and fasteners. Variable speed and reversing. Durable, right angle transmission with sealed ball bearing for a longer tool life. Includes: (2) 18V XR PACK batteries, 1 hour charger, screwdriver bit, heavy-duty kit box.

$282.29
Click To Buy

Spot Weld Annihilator Deluxe Kit

(DFXDF15DX) Spot Weld Annihilator Deluxe KitFeatures: The original Spot weld drill! Often copied, never replicated. Don�?t be fooled by knock-offs. The Dent-Fix innovative design is so revolutionary it�?s patented. The ultimate spot weld drill lets you set the depth and it pneumatically applies the correct amount of pressure. The drill speed and pressure have been calibrated so the tool cuts into the spot welds at the optimal condition, adding to the life of the drill bits. Complete jobs 75% faster. Removes spot welds in seconds. C-Clamp rotates and is easily removed to allow access to all areas. Dent Fix Equipment offers a complete one year warranty on this tool. The DF-15DX comes complete with the SPOT ANNIHILATOR, 1 in-line oiler, 1/ 10mm titanium coated and 2/ 8.0mm titanium coated drill bits. Comes in a form fitted hard plastic carrying case.

$401.51
Click To Buy

Maxi Clamp for Welded Studs

(DFXDF4) Maxi Clamp for Welded StudsFeatures: This heavy duty clamp pulls one to eighteen pins with a maximum pull of 10,000 lbs. Spread your pulling force over a seven inch area. Pull out creases, pillars and rocker panels. Individually tighten or loosen pins to customize your pull.

$81.86
Click To Buy

Over Voltage Protector

(DFXDF601) Over Voltage ProtectorFeatures: Electronics of modern cars are at risk from voltage surges during a number of common daily jobs. Surges during MIG welding, jump-starting, battery charging and starting are just a few. Damage to systems such as Air Bags and ABS may not be immediately apparent, but could prove fatal. Engine management systems, fuel injection, radios, alarms and many other delicate electronics can be destroyed. You could be liable for damage to a customer�?s vehicle. Equipped with an LED indicator to show that the unit is providing protection and installed correctly. If the unit is overloaded or damaged, the light will go out. Gives greater protection than other comparable units. Features a heavy-duty varistor, not a small diode insuring maximum protection and maximum peace-of-mind.

$43.32
Click To Buy

1/4" Hole Punch Plier

(DFXDF8) 1/4" Hole Punch PlierFeatures: This is the most efficient hole punch that you will ever own. You''ll be amazed at how little pressure is needed to punch out holes. With the one and one quarter inch deep throat you will be able to get the best overlap capability for your plug welds.

$72.67
Click To Buy

Dorman Assorted Oil Drain Plug Tech Tray - 44 Pc.

(DOR030-539) Dorman Assorted Oil Drain Plug Tech Tray - 44 Pc.Features: Tray Includes 22 types, 44 pieces total: 1/2""-20 Standard M12-1.75 Pilot Point M18-1.5 Standard M22-1.5 Standard M14-1.5 Standard M12-1.5 Standard 1/2""-20 Single Oversized M12-1.25 Standard M12-1.25 Pilot Point 1/2""-20 Pilot Point w/ Molded Gasket M14-1.25 Pilot Point w/ Gasket M14-1.5 Pilot Point w/ Molded Gasket 1/2""-20 Double Oversized M16.4-1.33 Standard 1/2""-20 Pilot Point M12-1.75 Pilot Point w/ Molded Gasket M12-1.75 Pilot Point w/ O-Ring Gasket M14-1.5 Standard M20-1.5 Standard M14-1.5 Pilot Point M12-1.75 Pilot Point w/ O-Ring Gasket M16-1.5 Pilot Point

$81.24
Click To Buy

Fuel Line Repair Kit - 1,000 Fuel Lines in One Kit

(DOR800-300) Fuel Line Repair Kit - 1,000 Fuel Lines in One KitFeatures: 1,000 Fuel lines in 1 kit. Pays for itself in 2 jobs. Fuel Line Repair Kit saves time - no more difficult manipulation of entire steel fuel lines Always have the fuel line you need on hand. Eliminate wasted bay time spent waiting on a fuel line delivery. Custom fabricate new professional quality nylon lines with OE style connectors on demand. Fuel line repair kit provides an alternative to costly OE lines that are difficult to install and time consuming. Increase customer satisfaction by repairing only the damaged section

$235.76
Click To Buy

OE Solutions Quick Disconnect Steel Fuel Line Repair Kit

(DOR800-500) OE Solutions Quick Disconnect Steel Fuel Line Repair KitFeatures: Designed to save the time and expense of complete fuel line assembly replacement by giving users the ability to repair the damaged section of fuel line or sending unit line. Includes over 150 pieces and repairs both domestic and import fuel lines and contains newly designed nylon to steel brass adapters that allow a safe/professional repair when connection nylon to steel lines. Provides solutions for common fuel line problems found when working with OEM steel fuel lines. Repairs are made with steel fuel line pieces. 150 pc set comes complete with the fuel line, parts, adapters, and more to fix these common problems: Twisted fuel lines Rusted line connection Cracked fuel line Broken fuel line clips Rusted fuel sending unit line Includes free Precision Bender and Free Compact Pipe Cutter.

$252.75
Click To Buy

6" - 8" Autobrade Buffer

(DYN18050) 6" - 8" Autobrade BufferFeatures: 0 - 2,500 RPM free speed. Uses 5"" to 8"" diameter buffs. Insulated handle absorbs vibration and reduces cold air transmission to the operator. Compact and lightweight design. 5/8"" - 11 male spindle. Rear exhaust, variable speed safety-lock lever throttle. Soft-grip handle can be positioned for right or left hand operation. Back-up pad and polishing bonnet not included.

$295.13
Click To Buy

Dynazip Deluxe Kit

(DYN18257) Dynazip Deluxe KitFeatures: 18255 standard tool 92245 3/4"" coarse wire wheel 92246 3/4"" medium wire wheel 92247 3/4"" fine wire wheel 92248 1/2"" coarse wire wheel 92249 1/2"" fine wire wheel 92250 zip eraser wheel 92252 1/2"" wheel hub assy. 92253 3/4"" wheel hub assy.

$420.42
Click To Buy

Dynorbital-Spirit 6" Diameter Non-Vac Random Orbital Sander - 3/16", General Sanding

(DYN21035) Dynorbital-Spirit 6" Diameter Non-Vac Random Orbital Sander - 3/16", General SandingFeatures: Low profile design with ergonomic grip Color-coded levers identify orbit size Less weight More power - 12,000 RPM May be converted to a vacuum tool with kit Comfort Platform - The platform provides additional wrist support and offers increased protecton against air exhaust. It also shields hand and wrist from contact with couplers and connectors. Three orbit diameters are available to choose from.

$174.37
Click To Buy