The Store

The Repair 124 Auto/Boat/Plane Section

2" Grinding Pads 50 Grit Roll Lock 25 pk.

(AP2RO50) 2" Grinding Pads 50 Grit Roll Lock 25 pk.Features: Roll Lock disc (cookie) - 50 grit 25 pack

$16.71
Click To Buy

2" Surface Prep Pad Kit

(AP2SPK) 2" Surface Prep Pad KitFeatures: Kit includes: 1 - 2"" Roll Lock Holder 4 - 2"" Roll Lock surface prep pads

$7.10
Click To Buy

3pc. Dead Blow Hammer Set

(AP3DBH) 3pc. Dead Blow Hammer SetFeatures: Set Includes: 1 each of 1/2 lb., 1 lb. and 2 lb. Soft face won''t mar work surfaces Head is packed with metal pellets to add extra force to the hammer and eliminate rebound Can be used for all types of assembly and repair operations Weight: 3.5 lbs.

$16.27
Click To Buy

3" Surface Prep Pad Kit

(AP3SPK) 3" Surface Prep Pad KitFeatures: Kit includes: 1 - 3"" Roll Lock Holder 4 - 3"" Roll Lock surface prep pads

$10.19
Click To Buy

Smart Eraser Pad

(AP400E) Smart Eraser PadFeatures: Pad is for use with the AP 1232 Pad is molded rubber with 5/16""-24 thread arbor Pad size: 3-1/2"" diameter 4000 RPM max speed

$9.35
Click To Buy

Body Hammer & Dolly Set - 7 Pc.

(AP5510) Body Hammer & Dolly Set - 7 Pc.Features: Tough fiberglass hammer handles for extended service life Includes: Curved dolly, utlility dolly, double-end dolly, shrinking dolly, standard bumping hammer pick, finish hammer, reverse curved hammer. Comes in molded case.

$18.38
Click To Buy

Cordless Circuit Tester

(AP7760) Cordless Circuit TesterFeatures: This unit does not require ground wire or clip and is safe with ECMs, Sensors, Transducers, Airbags, etc. Designed to be used on DC powered circuits with voltages between 3 and 28 volts. Special designed V-Tip needle allows safe piercing and prevents side-slipping when piercing wire''s insulation. V-Tip can be removed to test hard to reach places. Unit works with replaceable long-life alkaline batteries. Made of rugged chrome metal.

$8.97
Click To Buy

Flip Impact Socket Set - 3 Pc., Fractional & Metric

(AP7843) Flip Impact Socket Set - 3 Pc., Fractional & MetricFeatures: Set includes: 19mm x 21mm flip impact socket, 3/4"" x 13/16"" flip impact socket, and 3"" extension bar. Fits most applications requiring Fractional or Metric lugnuts. Includes blow molded case.

$12.84
Click To Buy

6 Pc. Noid Lite Set with Case

(AP7872) 6 Pc. Noid Lite Set with CaseFeatures: The most economic way to check electronic fuel injection (EFI) signals Fast ad easily checks for systems of GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI. Just disconnect the fuel injectors, plug the noid lite into the injector, plug the noid lite into the injector harness and then crank the engine

$10.26
Click To Buy

Antenna Wrench and Radio Service Kit

(AP7888) Antenna Wrench and Radio Service KitFeatures: Removes most domestic and import radio antennas Includes universal radio wrench, Ford radio removal tool, GM standard and tappered radio removal bits, molded case.

$12.26
Click To Buy

Deluxe Noid Lite and GM AC Signal Test Lights Set

(AP7898) Deluxe Noid Lite and GM AC Signal Test Lights SetFeatures: The most economic way to check electronic fuel injection (EFI) signals Quickly and easily checks for systems of GM TBI, Bosch PFI Ford TBI, GM PFI, Geo TBI and GM SCPI To test, just disconnect the fuel injectors, plug the Noid Lite into injector wiring harness then crank the engine Normal voltage is indicated by flashing light which is visible from passenger compartment Blow molded case for easy storage and transport

$16.45
Click To Buy

Single Suction Cup Tool

(AP9038) Single Suction Cup ToolFeatures: 4-5/8"" diameter suction cup for secure grip High impact plastic construction 77 lbs. capacity

$10.00
Click To Buy

6 PC. PUNCH & CHISEL SET

(AP9310) 6 PC. PUNCH & CHISEL SETFeatures: 6 PC. PUNCH & CHISEL SET

$15.53
Click To Buy

3/8" Drive Flexible Extension Bar - 7" Long

(AP9321) 3/8" Drive Flexible Extension Bar - 7" LongFeatures: High quality Chrome Vanadium steel suitable for use where traditional solid bar extension bars will not fit Suitable for all hand ratchet applications

$17.42
Click To Buy

Mig Welder Pliers

(AP9408) Mig Welder PliersFeatures: Designed to be used for welding operations Allows for installation and removal of contact tips and nozzles Spring loaded design allows for easy opening and closing of pliers Special pliers design allows wire cutting, hammering, removal of insulation bushing and installation and drawing out wire Allows removal of spatter from inside, outside and end Pliers will increase productivity by saving time

$7.10
Click To Buy

5pc 8" Pliers Set

(AP9465) 5pc 8" Pliers SetFeatures: Set Includes: 10"" Water Pump Pliers 8"" Slip Joint Pliers 8"" Diagonal Cutter Pliers 8"" Straight Nose Pliers 8"" Linesman Pliers

$14.95
Click To Buy

Dual Drive Stubby Ratchet - 1/4" and 3/8"

(AP9700) Dual Drive Stubby Ratchet - 1/4" and 3/8"Features: Innovative design gives you 1/4"" & 3/8"" Drive sizes in one small package. 72 tooth ratcheting system Chrome plated & heat treated Forward & reverse drive

$6.24
Click To Buy

21 Piece Buzz Block Sanding and Cutting Kit

(APBB1500) 21 Piece Buzz Block Sanding and Cutting KitFeatures: Buzz Block body saw attachment and accessories convert any air saw to a long reach mini straight line sander Ideal for hard to reach spots for smoothing body filler Firm or soft pads for achieving desired results on contours or flat surfaces Heavy duty industrial air saw eliminates drag and powers through the toughest of surfaces Back-up pads for use with PSA sandpaper Saw comes complete with newly designed guide that prevents ""Waffleing"" while used for both sanding and cutting Kit Includes: - Heavy Duty Industrial Air Saber Saw - Buzz Block Adapter - Buzz Block Firm Back-Up Sanding Block (28mm Thickness) - Buzz Block Soft Back-Up Sanding Block (22mm Thickness) - Buzz Block Heavy Duty Reinforced Work Guide - 5 pc. Blade Set, 24 Teeth per Inch - 5 pc. Blade Set, 32 Teeth per Inch - 3 pc. 40 Grit Sanding Paper - 3 pc. 80 Grit Sanding Paper

$129.62
Click To Buy

Pneumatic Door Skinning Tool

(APDS1000) Pneumatic Door Skinning ToolFeatures: Save significant time and cost in skinning doors Faster than any other method Factory like results in one pass One hand operation Patent #6,578,404 FEATURES OF THE DS1000 Forged and hardened steel crimping head is specially designed to roll the steel flanges over with a minimum of physical effort, and leaves the flange smooth without unsightly ripples. Design allows tool to maneuver around inner and outer curves as well as most body design features. Close tolerance design and manufacturing, results in a tool that is incredibly smooth, quiet, and easy to use. BENEFITS: Drastic reduction in the time required to install a door skin. As much as an hour or more can be expected improving your bottom line in a commission or rate environment. One handed operation to allow for free hand to manipulate the work piece. Variable flange thickness adjustment allows for accurate dispersement of panel adhesive in the crimped area resulting in a smooth glue bead. Drastic improvement in the quality of the finished product. The finished crimp typically is indistinguishable from a factory crimp.

$257.94
Click To Buy

Pneumatic Door Skin Remover Tool

(APDS2000) Pneumatic Door Skin Remover ToolFeatures: Precision machined aluminum body components, hardened shafts, and ball bearing construction throughout, for long life and maximum durability to provide many years of trouble free service for real world professional use. Forged and hardened steel de-crimping head is specially designed to un-fold the steel flanges of a damaged door skin with a minimum of physical effort. The DS 2000 is manufactured to be very versatile with provisions to reposition the un crimping head to various angles based on operator preference. A secondary handle which can be installed in either the vertical or horizontal positions adds stability to help keep the tool oriented in the proper position. Powerful pneumatic drive motor with planetary gear reduction reduces the speed and allows for maximum range of motion of the un-crimping head. Design allows tool to maneuver around inner and outer curves as well as most body design features. Close tolerance design and manufacturing, results in a tool that is incredibly smooth, and easy to use.

$257.94
Click To Buy

2 PC. Gravity Feed Spray Gun Holder

(APGFH1000) 2 PC. Gravity Feed Spray Gun HolderFeatures: 2 pc gravity feed gun holder works great with all gravity feed spray guns Top strainer holder may be removed for additional clearance Strainer holder swivels away from cup

$7.42
Click To Buy

Mini Neon Pick & Driver Set

(APMHS200) Mini Neon Pick & Driver SetFeatures: High visibility handle, easy to locate Heat treated, chrome plated, chrome vanadium steel shafts with magnetic tips Four picks for removing/installing, aligning, probing and piercing Includes: Offset 45 degree hook, Straight pick, 90 Degree hook, Full hook, 1/8"" Flat screwdriver, #0 Phillips screwdriver, SD-20 Star screwdriver, SD-15 Star screwdriver Comes in plastic case for easy carry and storage

$10.00
Click To Buy

Universal Car C.V. Flex Boot

(ARAFB3000) Universal Car C.V. Flex BootFeatures: Low cost, simple, easy to use with Rapid Flexx Gun(pneumatic tool) High technology, patented rubber formulation material. High elasticity tolerance to hot & cold temperatures Testing results show superior stretching and breaking characteristics compared to O.E. and other universal boots Install the flexx boot in minutes, save on labor time. Engine side c.v. boot can be installed without removing the drive axle, wheel side C.V. boot installed without C.V. joint separation. FB3000 universal flexx boot covers 98% of automotive applications. Minimal inventory cost, (3)boot part numbers to stock. All flexx boots carry a one year limited warranty.

$15.67
Click To Buy

Universal Truck C.V. Flex Boot

(ARAFB3001) Universal Truck C.V. Flex BootFeatures: Low cost, simple, easy to use with Rapid Flexx Gun(pneumatic tool) High technology, patented rubber formulation material. High elasticity tolerance to hot & cold temperatures Testing results show superior stretching and breaking characteristics compared to O.E. and other universal boots Install the flexx boot in minutes, save on labor time. Engine side c.v. boot can be installed without removing the drive axle, wheel side C.V. boot installed without C.V. joint separation. FB3001 universal flexx boot covers 100% of utility, 4x4 & car applications Minimal inventory cost, (3)boot part numbers to stock. All flexx boots carry a one year limited warranty.

$18.00
Click To Buy

Rack & Pinion Bellow Flexx Boot

(ARAFB4000) Rack & Pinion Bellow Flexx BootFeatures: Low cost, simple, easy to use with Rapid Flexx Gun(pneumatic tool). High technology, patented rubber formulation material. High elasticity tolerance to hot & cold temperatures Testing results show superior stretching and breaking characteristics compared to O.E. and other universal boots Install the flexx boot in minutes, save on labor time. Engine side c.v. boot can be installed without removing the drive axle, wheel side C.V. boot installed without C.V. joint separation. FB4000 universal rack and pinion boot covers 100% of automotive applications. Minimal inventory cost, (3)boot part numbers to stock. All flexx boots carry a one year limited warranty.

$16.58
Click To Buy

Transmission Oil Cooler Line Disconnect Tool - Ford

(AST8014) Transmission Oil Cooler Line Disconnect Tool - FordFeatures: For removal of both oil cooler lines from fittings on automatic transmissions Applicable: Ford Taurus & Escort with AXOD & ATX transmissions Blue anodized aluminum

$9.28
Click To Buy