The Store

The Repair 15 Auto/Boat/Plane Section

Measuring Set - Caliper, Micrometer and Ruler

(FOW72-004-000) Measuring Set - Caliper, Micrometer and RulerFeatures: Includes 0-6"" black face One-Rev Caliper with .001 graduations; high quality 0-1"" outside micrometer, .0001 graduations, carbide tips and lock; 6"" EZ read black ruler 5R graduations (32nds, 64ths, 10ths, 100ths) and carrying case.

$70.95
Click To Buy

Shockproof Dial Caliper - 0-6"

(FOW72-008-706) Shockproof Dial Caliper - 0-6"Features: Stainless steel construction Silky smooth movement .100"" range per revolution .001"" reading dial face Shockproof design Comes with molded case.

$32.25
Click To Buy

Inch/Metric Dial Caliper; 0-6"/155mm

(FOW72-030-006) Inch/Metric Dial Caliper; 0-6"/155mmFeatures: Dial graduation .001/.02mm Dial face reads in both inch (black and metric (red). Hardened stainless steel throughout. Inside, outside and depth measurement. Raised sliding surface prevents wear and defacement of graduations Includes fitted case.

$39.35
Click To Buy

0-1" Digit Counter Outside Micrometer

(FOW72-224-001) 0-1" Digit Counter Outside MicrometerFeatures: Featuring clear, easy to read numbers on a digital counter, Fowler''s digit counter micrometers are an economical, fast and easy-to-use addition to the machinist''s toolchest, the shop floor or in the QC area. Hammertone grey baked enamel frame with heat insulated frames. Microfine graduations on satin chrome. Anvil and spindle hardened and precision ground with microlap finish on carbide tipped measuring faces. Spindle thread is hardened, ground and lapped. Diameter of measuring faces: .256"" Ratchet stop thimble on all models. Quick, easy zero adjustment on sleeve. Positive locking nut on spindle. Accuracy: .00016"" Parallelism: .00005"" for 0-1"" Flatness: .00003"" 0-1"" Range .0001"" Graduation Meets or exceeds Federal accuracy specs. Includes wrench and fitted case.

$36.73
Click To Buy

Digit Counter Micrometer with Insulated Frames, 0-25mm

(FOW72-224-009) Digit Counter Micrometer with Insulated Frames, 0-25mmFeatures: Digit Counter Carbite tipped measuring faces Rachet thimble and locking nut Complete in shop-hardened case Inch Series: Digital counter reads .001"", sleeves reads .0001"" Accuracy: .0001"" Metric Series: Digital counter reads: .01mm, sleeves reads .001mm Accuracy: .001mm

$36.73
Click To Buy

0-3" Digit Counter Outside Micrometer Set with Standards and Case

(FOW72-224-103) 0-3" Digit Counter Outside Micrometer Set with Standards and CaseFeatures: Featuring clear, easy to read numbers on a digital counter, Fowler''s digit counter micrometers are an economical, fast and easy-to-use addition to the machinist''s toolchest, the shop floor or in the QC area. Hammertone grey baked enamel frame with heat insulated frames. Microfine graduations on satin chrome. Anvil and spindle hardened and precision ground with microlap finish on carbide tipped measuring faces. Spindle thread is hardened, ground and lapped. Diameter of measuring faces: .256"" Ratchet stop thimble on all models. Quick, easy zero adjustment on sleeve. Positive locking nut on spindle. Accuracy: .00016"" Parallelism: .00005"" for 0-1"" Flatness: .00003"" .0001"" Graduation 0-3"" Range with standards and case. Meets or exceeds Federal accuracy specs.

$103.77
Click To Buy

0-6" Digit Counter Depth Micrometer

(FOW72-225-226) 0-6" Digit Counter Depth MicrometerFeatures: Range: 0-6"" Easy to read Digit Counter Graduation: .001"" 6 Rods Satin chrome finish Ratchet thimble Locking clamp Rod diameter: .176"" Includes wrench and fitted case

$107.75
Click To Buy

4 Piece Swiss Style Micrometer Set - 0-4", 0.0001"

(FOW72-229-104) 4 Piece Swiss Style Micrometer Set - 0-4", 0.0001"Features: Swiss style, imported micrometers offer a great value. They have the same fine features and high quaility that you would expect from comparable Swiss tools - but at a fraction of the price. Ratchet thimble for consistent readings. Barrel, thimble and frame are satin chrome finished; microfine graduations allow easy reading. 0.0001"" graduations Insulated frame isolates heat from users hand Positive lever locking clamp Anvil and spindle are hardened and precision ground Set features fitted case, standards for sizes 2"" and over and adjustment wrench. Meets or exceeds federal specifications for accuracy.

$103.14
Click To Buy

Metric Outside Micrometer Set

(FOW72-229-220) Metric Outside Micrometer SetFeatures: .01mm graduations Measuring faces are carbide tipped Accuracy: �?? .001mm for 0-25mm and 25-50mm sizes Friction/ratchet style thimbles Insulated frames Positive lever-locking clamp Sizes over 25mm include standards Includes wrench and fitted case

$87.81
Click To Buy

Digital Disc Brake Deep Micrometer; Fractional

(FOW72-234-222) Digital Disc Brake Deep Micrometer; FractionalFeatures: Mechanical digital readout for easy, precise measurements Carbide tipped anvil faces - one pointed, one flat 3-1/2"" jaw depth Includes measuring standard Measuring range: .300'' - 1.300""; Graduations: .001""

$52.25
Click To Buy

Digital Disc Brake Deep Micrometer; Metric

(FOW72-234-223) Digital Disc Brake Deep Micrometer; MetricFeatures: Mechanical digital readout for easy, precise measurements Carbide tipped anvil faces - one pointed, one flat 3-1/2"" jaw depth Includes measuring standard Measuring range: 7.6mm-33mm Graduations: .01mm

$52.25
Click To Buy

Extended Range Brake Rotor Micrometer with Digital Counter Readout

(FOW72-234-422) Extended Range Brake Rotor Micrometer with Digital Counter ReadoutFeatures: Range: 0.3"" - 1.7"" 0.001"" Resolution Carbide tipped Easy to read digital counter readout.

$51.57
Click To Buy

12" Combination Square

(FOW72-373-012) 12" Combination SquareFeatures: 12"" blade graduated in 1/8"", 1/16"", 1/32"", and 1/64"" Ruler blade is chrome plated for corrosion resistance. Square head includes level Square head is adjustable along full length of steel rule.

$51.88
Click To Buy

Telescopic Gage Set - 6 Pc.

(FOW72-470-006) Telescopic Gage Set - 6 Pc.Features: Spring loaded snap gages allow precise measurement of internal dimensions when used with a micrometer. Set includes 6 gages allowing measurement from 5/16"" thru 6"" (8mm thru 150mm) Comes in vinly pouch.

$75.28
Click To Buy

DIAL INDICATOR and MAGNETIC BASE SET

(FOW72-520-199) DIAL INDICATOR and MAGNETIC BASE SETFeatures: Indicator features: 1"" travel - continuous reading AGD group 2; 2-1/4"" dial diameter Revolution counter Lug back mount Magnetic base features: 85 lb. pull strength On/off switch Fine adjustment

$48.38
Click To Buy

Disc & Rotor Combo Kit

(FOW72-520-222) Disc & Rotor Combo KitFeatures: Includes both a Disc & Rotor/Ball Joint Gage and a Mechanical Digital Disc Brake Micrometer. Set comes in a convenient molded case. Disc & Rotor/Ball Joint Gage Features: Checks ball joint wear and disc rotor runout. Checks tire and wheel runout, gear backlash, valve guide wear, etc. 12"" flex arm can be set to almost any measuring position desired. Indicator features 0-1"" travel, and .001"" graduations. Digit Disc Brake Micrometer Features: Measures thickness,thickness variation and score depth. Carbide tipped anvil faces. Includes measuring standard. Jaw depth: 3.5"" Digit counter graduations: .001"" Measuring range: .300""-1.300"" Positive locking nut on spindle

$107.75
Click To Buy

Anyform & Rotor Combo Kit

(FOW72-520-700) Anyform & Rotor Combo KitFeatures: This kit provides a combination of holding applications. Use the vise grip and flex arm to check ball joint wear, brake and rotor runout. Attach the flex arm to the Anyform base for magnetically mounting on virtually any metallic surface. Checks ball joint wear and disc rotor runout. Checks tire and wheel runout, gear backlash, valve guide wear, etc. 12"" flex arm can be set to almost any measuring position desired. Indicator features 0-1"" travel and .001"" graduations. Fit mag base to any shape or form. Magnetic segments conform to any odd shape. Rigid one piece construction. 40lb pull.

$155.77
Click To Buy

Premium Dial Indicator Set - 0-1" with Magnetic Base

(FOW72-520-707) Premium Dial Indicator Set - 0-1" with Magnetic BaseFeatures: Shockproof indicator Graduations: .001"" Range: 0-1"" Rotatable face for zeroing indicator. Adjustable pointers to mark +/- measurements. Includes: 2-1/4"" diameter face indicator, magnetic base with adjustable postition post, and fitted case.

$95.78
Click To Buy

Disc and Rotor/Ball Joint Gage

(FOW72-520-730) Disc and Rotor/Ball Joint GageFeatures: Checks ball joint wear and disc rotor runout. Checks tire and wheel runout, gear backlash, valve guide wear, etc Meets state inspection requirements Indicator features 0-1"" travel, and .001"" graduations.; Inch/Metric 1""/25mm, .001""/.01mm grad Includes shop-hardened case

$95.78
Click To Buy

Economy Disk Brake Rotor and Ball Joint Indicator Set

(FOW72-520-757) Economy Disk Brake Rotor and Ball Joint Indicator SetFeatures: Check ball joint for wear and brake discs for rotor runout. Plus many other uses. Flexible arm locks in place to locate indicator just where you need it. Locking pliers allow easy and secure clamping to most any rigid structure. Meets state inspection requirements. Features an economy dial indicator - perfect for the occasional user and DIYer. Graduations: .001"" Range: 0-1""

$63.86
Click To Buy

Dial Indicator Set with Magnetic Base - 1" Range

(FOW72-522-101) Dial Indicator Set with Magnetic Base - 1" RangeFeatures: Includes 1"" range indicator and magnetic base, plus rods, swivel clamp and wooden case. Indicator features: 2"" dial face, .001"" graduation, satin chrome finish, lug back. 50 lb pull magnetic base.

$74.25
Click To Buy

Chrome Flex Magnetic Indicator Set

(FOW72-585-500) Chrome Flex Magnetic Indicator SetFeatures: AGD Indicator features: AGD Group 2 Dial diameter: 2-1/4"" Travel: 1"" Reading: .001"" Continuous reading: .100"" Carbide tipped point Flex Arm Mag Base features: Corrosion resistant chrome plated flex arm. 85 lbs. pull magnet Holds rigidly in almost any position. V-base for mounting on rounded surfaces. Magnetic Indicator Back features: Use for positioning the indicator on most metal surfaces. Protective coating. All packed in a Shop-Hardened case!

$65.35
Click To Buy

Dial Indicator Gage Set with Flexible Arm and Magnetic Base

(FOW72-641-300) Dial Indicator Gage Set with Flexible Arm and Magnetic BaseFeatures: Multipurpose tool with 12-1/2"" flexible arm which can be set in any desired plane. Great for precision measurements on engines Dial Indicator measures 0-1"" in .001"" graduations Includes: Gage, contact tip, locking flexible arm and On/Off magnetic base.

$55.88
Click To Buy

Cylinder Bore Gage - Deluxe Set, 2" to 6" Range, .0005"

(FOW72-646-300) Cylinder Bore Gage - Deluxe Set, 2" to 6" Range, .0005"Features: Designed to accurately measure cylinder bores for taper and out-of-round conditions. Easily adjustable and self centering Range 2""-6"" diameter .0005"" graduations 6"" depth Includes all the necessary spacers, interchangeable extensions and a fitted wood case.

$81.24
Click To Buy

XTENDER CYLINDER DIAL BORE GAGE - 1.4" to 6" Range

(FOW72-646-400) XTENDER CYLINDER DIAL BORE GAGE - 1.4" to 6" RangeFeatures: Easy to read dial gage Graduation: .0005"" Insulated grip Measures bore diameter to 9"" depth Range: 1.4"" to 6"" Carbide Anvils Fitted case included

$103.14
Click To Buy

6 " Drum and Rotor Measuring Caliper Kit with Dust, Oil and Water Resistant Caliper

(FOW74-100-775) 6 " Drum and Rotor Measuring Caliper Kit with Dust, Oil and Water Resistant CaliperFeatures: Measures disc brakes and up to 12"" on brake drums. Includes set of clamps; 4 sets of set screws; 1 Allen wrench; 1 set of 3-3/4"" contact points; 1 set of 3/4"" cone contact points & 1 set of 3/4"" flat contact points in plastic tube. When measuring brake drums only, add 8"" to measurement-allows for long cone & jaw widths. For use with 6"" and 8"" calipers. Resolution: 0.0005""/.01mm. Direct inch/metric conversion. Absolute/incremental measurement. Furnished in shop-hardened case.

$108.62
Click To Buy