The Store

The Repair 150 Auto/Boat/Plane Section

3/8" Impact Driver

(OTC4608) 3/8" Impact DriverFeatures: Loosens hard-to-turn screws, bolts or nuts. Handle design prevents possibility of hitting hand with hammer when striking impact driver. Can be used with sockets or with included bit holder for screwdriver bits Includes eight screwdriver bits: No. 2 Phillips bit, 1-3/8"" long with 5/16"" hex No. 2 Phillips bit, 3-1/8"" long with 5/16"" hex No. 3 Phillips bit, 1-3/8"" long with 5/16"" hex No. 3 Phillips bit, 3-1/8"" long with 5/16"" hex 5/16"" wide x 1-3/8"" long with 5/16"" hex slotted bit 5/16"" wide x 3-1/8"" long with 5/16"" hex slotted bit 3/8"" wide x 1-3/8"" long with 5/16"" hex slotted bit 3/8"" wide x 3-1/8"" long with 5/16"" hex slotted bit

$18.05
Click To Buy

Stinger 5/16" Ratcheting Battery Wrench - Long Handled

(OTC4615) Stinger 5/16" Ratcheting Battery Wrench - Long HandledFeatures: Designed for use on GM side-terminal batteries, or any 5/16"" hex head battery bolt. Long handle allows access to hard-to-reach battery terminal bolts. 5/16"", 6 point, box end, 10"" long, ratcheting wrench; insulated handle.

$7.73
Click To Buy

Windshield Wiper Puller

(OTC4676) Windshield Wiper PullerFeatures: Removes wiper arms on many foreign and domestic cars and light trucks. Will not damage wiper arm or hood cowling during removal. Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft.

$9.48
Click To Buy

A/C Line Disconnect Tool for Toyota

(OTC6073) A/C Line Disconnect Tool for ToyotaFeatures: Used to release the plastic quick-connect fittings on the high and low pressure air conditioning lines at the evaporator Services 1998-newer Toyota Corolla, 1998-newer Geo Prism, 1998-1/2-newer Toyota Land Cruiser and Lexus LX470, 1999-newer Toyota Avalon, Camry, Solara and Sienna mini vans.

$13.55
Click To Buy

OTC Bulletproof Torx Bit Socket - T20, 1/4" Drive

(OTC6103) OTC Bulletproof Torx Bit Socket - T20, 1/4" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$6.59
Click To Buy

OTC Bulletproof Torx Bit Socket - T25, 1/4" Drive

(OTC6104) OTC Bulletproof Torx Bit Socket - T25, 1/4" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$6.59
Click To Buy

OTC Bulletproof Torx Bit Socket - T27, 1/4" Drive

(OTC6105) OTC Bulletproof Torx Bit Socket - T27, 1/4" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$6.59
Click To Buy

OTC Bulletproof Torx Bit Socket - T30, 1/4" Drive

(OTC6106) OTC Bulletproof Torx Bit Socket - T30, 1/4" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$6.59
Click To Buy

OTC Bulletproof Torx Bit Socket - T40, 3/8" Drive

(OTC6107) OTC Bulletproof Torx Bit Socket - T40, 3/8" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$7.75
Click To Buy

OTC Bulletproof Torx Bit Socket - T45, 3/8" Drive

(OTC6108) OTC Bulletproof Torx Bit Socket - T45, 3/8" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$7.75
Click To Buy

OTC Bulletproof Torx Bit Socket - T50,, 3/8" Drive

(OTC6110) OTC Bulletproof Torx Bit Socket - T50,, 3/8" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$7.75
Click To Buy

OTC Bulletproof Torx Bit Socket - T55, 3/8" Drive

(OTC6111) OTC Bulletproof Torx Bit Socket - T55, 3/8" DriveFeatures: Durability guaranteed. Made of the finest heat-treated steel.

$7.75
Click To Buy

Tamper Resistant Torx Bits and Socket Holder Set - 8 Pc.

(OTC6145) Tamper Resistant Torx Bits and Socket Holder Set - 8 Pc.Features: OTC''s Bulletproof Torx sockets are made from superior S2 steel. Set includes: 1/4"" sq. drive socket x 1/4"" Hex holder, T10H, T15H, T20H, T25H, T27H, T30H, T40H.

$16.77
Click To Buy

Ford Cam Alignment Tool

(OTC6467) Ford Cam Alignment ToolFeatures: Applications include: 19941995 Mustang (3.8L V6), 1989-1995 Thunderbird Supercharged, 1990-1995 Thunderbird (3.8L V6), 1989-1995 Cougar Supercharged (3.8L V6), 1990-1995 Cougar (3.8L V6), and 1995 Windstar (3.8L V6). Ford Tool Part No.: T89P-12200-A Global Part No.: 303-358

$15.47
Click To Buy

Ford Cam Sensor Synch Tool

(OTC6474) Ford Cam Sensor Synch ToolFeatures: Applications include: 1994-2002 Contour (2.0L DOHC Zetec), and1994-2002 Mystique (2.0L DOHC Zetec). Ford Tool Part No.: T94P-6256-CH Global Part No.: 303-465

$11.29
Click To Buy

Fuel Line Disconnect Tool - 3/8" & 5/16"

(OTC6509) Fuel Line Disconnect Tool - 3/8" & 5/16"Features: Special low-profile design works in close quarters on GM, Ford, and Chrysler vehicles where there is limited clearance between the fuel line fittings and fuel filters, fuel rails, or sending units. This tool is designed to access the center port on GM fuel tank sending unit. For 3/8"" & 5/16"" applications; will also service 1999 thru current GM pickups, and 2000 thru current Suburban, Tahoe, and Yukon gasoline vehicles.

$11.80
Click To Buy

Fuel Line Disconnect Tool - 3/8" and 1/2"

(OTC6511) Fuel Line Disconnect Tool - 3/8" and 1/2"Features: Special low-profile design works in close quarters on GM, Ford, and Chrysler vehicles where there is limited clearance between the fuel line fittings and fuel filters, fuel rails, or sending units. This tool is designed to access the center port on GM fuel tank sending unit. For 3/8"" and 1/2"" applications; will also service 2001 thru current 3/4- and 1-ton trucks with the Duramax Diesel engines.

$11.80
Click To Buy

Ball Joint Separator Fork

(OTC6535) Ball Joint Separator ForkFeatures: Used to remove shock linkage, tie rods, and ball joints. Also for general service on many cars and light trucks. Size: 16"" long, 15/16"" Fork Spread

$19.93
Click To Buy

4 Pc. A/C Line Quick Disconnect Tool Set

(OTC6538) 4 Pc. A/C Line Quick Disconnect Tool SetFeatures: These tools will quickly separate spring-lock refrigerant lines on the air conditioning systems of 1981 to 2003 Ford vehicles, and 1994 to 2003 Chrysler and Jeep vehicles. Spring-loaded in the closed position to deflect spray that occurs when a line is disconnected.

$17.05
Click To Buy

Wheel Bearing Locknut Socket - 54mm for Toyota

(OTC6612) Wheel Bearing Locknut Socket - 54mm for ToyotaFeatures: 54mm hex socket services Toyota FJ, LN, and RN. 1/2"" sq. drive.

$17.35
Click To Buy

Wheel Bearing Locknut Socket - 2-3/4" for Ford

(OTC6796) Wheel Bearing Locknut Socket - 2-3/4" for FordFeatures: Special ""rounded"" 2-3/4"" hex socket services 3/4- and 1-ton Ford F-250 and F-350 trucks with automatic locking hubs. 1/2"" sq. drive.

$18.05
Click To Buy

Truck Wheel Bearing Locknut Socket 2-3/8" (6 pt.)

(OTC6936) Truck Wheel Bearing Locknut Socket 2-3/8" (6 pt.)Features: Special ""rounded"" hex socket (2-3/8"") services 1990 & newer Ford Ranger, Bronco II and Explorer with automatic locking hubs. 1/2"" sq. drive.

$18.05
Click To Buy

TOOL ,QUICK DISCONNECT

(OTC7244) TOOL ,QUICK DISCONNECTFeatures: TOOL ,QUICK DISCONNECT

$17.08
Click To Buy

Fuel Line Disconnect Set - 2 Pc.

(OTC7361) Fuel Line Disconnect Set - 2 Pc.Features: These little fuel line disconnect tools are just right for working on quick disconnect fuel lines. They fit 5/16"" or 3/8"" fuel lines on Chrysler, Ford and GM vehicles. They separate the fuel lines without damaging the connectors.

$7.00
Click To Buy

Ford Radio Removal Tools

(OTC7575) Ford Radio Removal ToolsFeatures: Simply insert these tools into the holes on the radio face plate to release the retaining clips, then use them as handles to pull the radio from the instrument panel. Fast and easy! Same as Ford No. T87P-19061-A For use on: 1987-current Mustang, 1988-current Tempo/Topaz, 1989-current Continental, 1990-current Taurus/Sable, Ranger/Bronco II, Probe, Lincoln Town Car, Mark VII, Crown Victoria/Grand Marquis, Thunderbird/Cougar, F-series pickups, and E-series vans, 1991-current Explorer and 1995-current Windstar.

$7.00
Click To Buy

TOOL, CLUTCH COUPLING

(OTC7646A) TOOL, CLUTCH COUPLINGFeatures: TOOL, CLUTCH COUPLING

$12.96
Click To Buy