The Store

The Repair 170 Auto/Boat/Plane Section

5 Piece Metric Double Box Wrench Set

(SUN9950M) 5 Piece Metric Double Box Wrench SetFeatures: Canvas Pouch included Fully polished drop forged alloy steel Includes 10mmx11mm, 12mmx14mm, 13mmx15mm, 16mmx18mm, 17mmx19mm Lifetime warranty

$19.36
Click To Buy

Bull Dog 4.5 HP Wet/Dry Vacuum with 8 Gallon Plastic Tank

(SVC5870800) Bull Dog 4.5 HP Wet/Dry Vacuum with 8 Gallon Plastic TankFeatures: 4.5 HP motor - 6�? cord. Rugged 8 gallon plastic tank. Includes 12�? x 1-1/4"" diameter hose, two - 1-1/4"" extension wands, 10"" combination wet/dry nozzle, 10"" squeegee insert, gulper nozzle, crevice tool.

$90.29
Click To Buy

Extra Long Hooker

(TA13800) Extra Long HookerFeatures: Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove ""O"" rings and washers. Hook is made of tough spring steel, hardened and plated with easy grip handle. 4-7/8"" Long Blade

$5.74
Click To Buy

Great Big Hooker

(TA13810) Great Big HookerFeatures: Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove ""O"" rings and washers. Hook is made of tough spring steel, hardened and plated with easy grip handle. 11"" Long Blade

$9.92
Click To Buy

Big Hooker Set

(TA13820) Big Hooker SetFeatures: Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove ""O"" rings and washers. Hook is made of tough spring steel, hardened and plated with easy grip handle. Includes: Extra Long Hooker and Great Big Hooker

$16.77
Click To Buy

4 Pc. BRASS PIN PUNCH SET

(TA14290) 4 Pc. BRASS PIN PUNCH SETFeatures: Contains 4 sizes of drift pin style brass punches: 1/8"" x 4"", 3/16"" x 4"", 1/4"" x 4"" and 3/8"" x 6"". Softer brass will not mar harder metal surfaces. Non-sparking. Knurled handles for better gripping.

$13.35
Click To Buy

Spray Gun Cleaning Kit

(TA17280) Spray Gun Cleaning KitFeatures: Contains all the necessary brushes and tools to effectively clean spray guns including HVLP paint spray guns. Can be used to clean gravity feed, siphon and undercoating guns. Brushes are used to clean threads, air passages and recesses of gun body. Safe to use with chemicals and solvents.

$6.81
Click To Buy

3/8" Rotary Spot Weld Cutter

(TA18000) 3/8" Rotary Spot Weld CutterFeatures: Quickly removes spot welds holding sheet metal. Has double sided 3/8"" cutting head (reverse head to renew cutting teeth) amd 1/4"" arbor with retracting pilot.

$6.27
Click To Buy

Heavy Duty Automatic Wire Stripper

(TA18950) Heavy Duty Automatic Wire StripperFeatures: Three tools in one - strips, crimps and cuts. Automatically self-adjusts to strip solid or stranded 10-26 gage wires. Removes insulation without damaging the conductor. Has adjustable stripping tension. Crimps insulated and non-insulated terminals. Cuts wire, fast, clean and smooth. Steel construction with insulated plastic handles. Easy to use with single hand action.

$13.13
Click To Buy

Wire Stripper

(TA19000) Wire StripperFeatures: Automatically adjusts to wire size. Cuts and strips solid or stranded 12-22 gage wire. Handles single or multiple conductor wire. Easy to use - yields clean, nick-free results every titme. Not designed to strip teflon or similar insulations.

$14.18
Click To Buy

In-Line Spark Checker Kit For Recessed Plugs

(TA23970) In-Line Spark Checker Kit For Recessed PlugsFeatures: A must for testing newer vehicles with recessed spark plugs. Troubleshoots virtually all domestic and import cars, SUV''s & trucks. Provides information not available with OBD II code reading devices. Shows a duplicate view of the ignition spark.

$14.18
Click To Buy

Wire and Cable Tie Assortment - 750 Pc.

(TA26200) Wire and Cable Tie Assortment - 750 Pc.Features: Self locking, flexible, multipurpose ties (zip tie style) Made from high strength Nylon 6/6 Ideal for securing wires, harnesses, cables and components. UL approved. 750 piece assortment includes the most popular lengths in different colors. Includes: 400 - 4"" 18 lbs. tensile strength (100 each black, white, yellow, and red ties) 300 - 8"" 75 lbs. tensile strength (white ties) 50 - 11"" 75 lbs. tensile strength (white ties)

$9.33
Click To Buy

Heavy Duty Circuit Tester - 6/12V

(TA27000) Heavy Duty Circuit Tester - 6/12VFeatures: The best quality electrical circuit tester available for checking 6 and 12 volt systems. Made to last longer than anyone''s lifetime! Use it to troubleshoot electrical circuits like any other circuit tester, but it is especially valuable because it will fit and work in confined crowded areas like under hoods and dashboards of modern cars and trucks. 6'' ground wire remains flexible in cold temperatures Checks 6 and 12 volt systems Special overbite alligator clip designed to stay put! Sharp, nickel plated piercing probe

$5.52
Click To Buy

H.D. Circuit Tester with 6-1/2" Probe

(TA27250) H.D. Circuit Tester with 6-1/2" ProbeFeatures: Circuit Tester features and extra long wire that stretches up to 12 feet for use, then automatically retracts. Quickly and easily check electrical system circuits and accessories on 6 and 12 volt systems.

$10.54
Click To Buy

Heavy Duty Circuit Tester With 12'' Retractable Wire and Battery Clip

(TA27300) Heavy Duty Circuit Tester With 12'' Retractable Wire and Battery ClipFeatures: Quickly and easily checks electrical circuits and accessories on 6 and 12 volt systems. Extra long, high visibility wire stretches for use, then automatically retracts. Supersharp probe.

$7.12
Click To Buy

Electronic Fuel Injection and Ignition Spark Tester Kit

(TA36310) Electronic Fuel Injection and Ignition Spark Tester KitFeatures: Quickly diagnose ""no start"" and engine miss conditions in the electrical fuel injection and spark plug circuits. Analyze rough running engines. Contains a noid light set to test electronic fuel injection signals and a in-line ignition spark checker shows a duplicate view of ignition spark. Supplied with instructions in a durable, plastic molded storage case. Noid light are supplied to check: Bosch PFI, Ford TBI, Geo TBI, GM PFI, GM SCPI, GM TBI

$15.30
Click To Buy

Strut Alignment Level

(TA61800) Strut Alignment LevelFeatures: Use this level to restore a vehicle''s camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. More accurate than other methods. Also for repair of CV joints, ball joints and tie rod ends. Super strong magnet - mounts on brake rotor, spindle or steering knuckle. Easy to read, unbreakeable bubble level. Camber settings from -3�?? to +3�?? for additional adjustment. Works on all vehicles equipped with MacPherson struts. Can remain on the vehicle during repair, or can be removed. Easy to use - 1. Simply place on vehicle before repair and zero the level. 2. Tighten the wing nut. 4. After the repair, push or pull on the strut until the level returns to the zero position.

$18.27
Click To Buy

Tie Rod End/Ball Joint Lifter

(TA61900) Tie Rod End/Ball Joint LifterFeatures: This labor saving tool quickly separates tie rod ends and ball joints from suspension components. Eliminates broken grease reservoirs. No need for excessive hammering. Powerful lever action breaks loose even the most stubborn joints. Works on virtually all tie rod ends and compact car ball joints. Heavy duty, all metal construction. For use with hand tools only. Instructions included.

$13.97
Click To Buy

Dent Puller and Slide Hammer

(TA81400) Dent Puller and Slide HammerFeatures: The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12"" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian''s hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and ""L"" puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2""-20.

$16.37
Click To Buy

Door Spring Tool for GM Cars

(TA87675) Door Spring Tool for GM CarsFeatures: Use to remove and install the door hinge springs found on late model General Motors vehicles. Makes a hard job easy. Can be used with a 1/2"" open end of ratcheting box wrench.

$12.89
Click To Buy

Windshield Removing Tool (Cold Knife)

(TA87900) Windshield Removing Tool (Cold Knife)Features: Use to remove windshields, backlights and bonded backlights on General Motors and Chrysler vehicles. Cuts the sealant around windows with specially designed tempered steel blade. Extra blade supplied with each tool. Pull handle provides additional leverage. Replacement Blade Part No. 87902.

$11.53
Click To Buy

Extra Long Sticker Scraper

(TA87965) Extra Long Sticker ScraperFeatures: Specially designed to access steep, sloping windshields and other hard-to-reach places. Excellent for corners and on curved surfaces. Supplied with 5 standard steel razor blades and 1 plastic blade. Use the plastic blade on laminated windows and plastic bumpers. The blade in the holder can be reversed for storage. The other blades store in the handle. Heavy duty construction. 16"" overall length.

$6.37
Click To Buy

9" Sanding Block

(TA89810) 9" Sanding BlockFeatures: Same style as Cat. No. 89800, except uses standard 9"" x 11"" sandpaper cut in thirds.

$6.75
Click To Buy

Reciprocating Air Saw Blades - 4", 18 TPI, 5 Pack

(TA90010) Reciprocating Air Saw Blades - 4", 18 TPI, 5 PackFeatures: Use these high quality blades to cut through a variety of metals, fiberglass and plastic. Great for body work and exhaust work. These bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual setscrew blade retention. Maximum speed is 10,000 strokes per minute. Always wear goggles when operating any air tool. Packed 5 blades per display pouch. Blade Length: 4"" Teeth per Inch: 18 Blade Type: All Purpose Recommend Use: General cutting of material 1/18"" and thinner

$6.72
Click To Buy

Reciprocating Air Saw Blades - 3", 24 TPI, 5 Pack

(TA90020) Reciprocating Air Saw Blades - 3", 24 TPI, 5 PackFeatures: Use these high quality blades to cut through a variety of metals, fiberglass and plastic. Great for body work and exhaust work. These bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual setscrew blade retention. Maximum speed is 10,000 strokes per minute. Always wear goggles when operating any air tool. Packed 5 blades per display pouch. Blade Length: 3"" Teeth per Inch: 24 Blade Type: Scroll Recommend Use: Fine cutting of material 1/16"" - 1/8"" thick

$6.72
Click To Buy

Reciprocating Air Saw Blades - 3", 32 TPI, 5 Pack

(TA90030) Reciprocating Air Saw Blades - 3", 32 TPI, 5 PackFeatures: Use these high quality blades to cut through a variety of metals, fiberglass and plastic. Great for body work and exhaust work. These bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual setscrew blade retention. Maximum speed is 10,000 strokes per minute. Always wear goggles when operating any air tool. Packed 5 blades per display pouch. Blade Length: 3"" Teeth per Inch: 32 Blade Type: Scroll Recommend Use: Fine cutting of material 1/16"" and thinner

$6.72
Click To Buy