The Store

The Repair 171 Auto/Boat/Plane Section

Reciprocating Air Saw Blades - 4", 32 TPI, 5 Pack

(TA90040) Reciprocating Air Saw Blades - 4", 32 TPI, 5 PackFeatures: Use these high quality blades to cut through a variety of metals, fiberglass and plastic. Great for body work and exhaust work. These bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual setscrew blade retention. Maximum speed is 10,000 strokes per minute. Always wear goggles when operating any air tool. Packed 5 blades per display pouch. Blade Length: 4"" Teeth per Inch: 32 Blade Type: All Purpose Recommend Use: General cutting of material 1/16"" and thinner

$6.72
Click To Buy

5 Piece Air Saw Blade Assortment

(TA90050) 5 Piece Air Saw Blade AssortmentFeatures: Use these high quality blades to cut through a variety of metals, fiberglass and plastic. Great for body work and exhaust work. These bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual setscrew blade retention. Maximum speed is 10,000 strokes per minute. Always wear goggles when operating any air tool. Packed 5 blades per display pouch. Contains (3) 3"" and (2) 4"" Blades

$6.72
Click To Buy

Quick Change Chisel Retainer

(TA94400) Quick Change Chisel RetainerFeatures: Securely holds .401"" shank chisels. Fits most popular air hammers. Safe to use, fast to change chisels. Just pull back collar to install or remove chisels. Retainer becomes part of tool eliminating need for other retainers.

$11.73
Click To Buy

Air Tool Oiler - "The Oiler"

(TA98500) Air Tool Oiler - "The Oiler"Features: Standard Model. High quality aircraft aluminum stem, precisely machined to 1/4"" NPT. Oil reservoir is fabricated of high impact plastic. Technician always sees oil supply and oiling action. Holds three to four days supply of oil. With each use of the air tool, a fine mist of precisely metered oil enters the air stream. All internal moving parts are coated and lubricated. Use on all 3/8"" and 1/2"" air impact guns, air wrenches, body shop air tools and pneumatic hammers. 1/4"" NPT Female inlet x 1/4"" NPT Male outlet.

$11.56
Click To Buy

Inline Blow Gun with Rubber Tip

(TA99190) Inline Blow Gun with Rubber TipFeatures: No need to keep on disconnecting an air tool to hook up a blow gun. Never gets lost or misplaced. Small, compact and easy to use. Fits permanently between air hose and coupler. Precision machined from aircraft aluminum. Air stream nozzle has a natural angle for easy use. Lightweight and durable. Available with OSHA or rubber nozzle. 1/4"" NPT Female x 1/4"" NPT Female.

$13.35
Click To Buy

BLOW GUN KIT

(TA99300) BLOW GUN KITFeatures: Includes the most popular Blow Gun bodies and accessories. Use for blowing out tubes and pipes; directing a fine stream of air; concentrating air; accessing restricted areas and filling tires. 1/4"" NPT Female inlet on Pistol Grip Handle and 1/4"" NPT Female x 1/4"" NPT Female inlets on Inline Blow Gun. Chrome plated nozzles.

$13.94
Click To Buy

6 X 9 Abrasive Hand Pads - Fine; Gray, 20 Pk.

(THA030) 6 X 9 Abrasive Hand Pads - Fine; Gray, 20 Pk.Features: Tomahawk Abrasive�?s Hand Pads are made with a synthetic fiber impregnated with abrasive grain for surface conditioning. Various grades available for all types of applications. Can be used wet or dry. Resists loading. Reusable. Will not leave fragments.

$14.37
Click To Buy

6 X 9 Abrasive Hand Pads - General; Maroon, 20 Pk.

(THA047) 6 X 9 Abrasive Hand Pads - General; Maroon, 20 Pk.Features: Tomahawk Abrasive�?s Hand Pads are made with a synthetic fiber impregnated with abrasive grain for surface conditioning. Various grades available for all types of applications. Can be used wet or dry. Resists loading. Reusable. Will not leave fragments.

$14.37
Click To Buy

6 X 9 Abrasive Hand Pads - Coarse; Green, 20 Pk.

(THA049) 6 X 9 Abrasive Hand Pads - Coarse; Green, 20 Pk.Features: Tomahawk Abrasive�?s Hand Pads are made with a synthetic fiber impregnated with abrasive grain for surface conditioning. Various grades available for all types of applications. Can be used wet or dry. Resists loading. Reusable. Will not leave fragments.

$14.37
Click To Buy

6 X 9 Abrasive Hand Pads - Industrial Coarse; Tan, 10 Pk.

(THA050) 6 X 9 Abrasive Hand Pads - Industrial Coarse; Tan, 10 Pk.Features: Tomahawk Abrasive�?s Hand Pads are made with a synthetic fiber impregnated with abrasive grain for surface conditioning. Various grades available for all types of applications. Can be used wet or dry. Resists loading. Reusable. Will not leave fragments.

$15.66
Click To Buy

Type 1 Chop Saw Wheels - 14" Diameter

(THA143321) Type 1 Chop Saw Wheels - 14" DiameterFeatures: Tomahawk Abrasive�?s Type 1 Premium Quality Chop Saw Wheels are designed for long life and fast cutting in general purpose applications. Ideal for metal, pipe, metal studs, channel iron, angle iron, bars, rods, flats, tubing, etc. Not for use with portable saws. Diameter: 14"" Thickness: 3/32"" Hole Size: 1"" Max RPM: 4,366

$5.47
Click To Buy

Cylinder With End Cut Carbide Rotary Bur-1/8"

(THA55018) Cylinder With End Cut Carbide Rotary Bur-1/8"Features: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 1/8"", Length of Cut - 1/2"", Shank - 1/8"", OAL - 1-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$5.47
Click To Buy

Cylinder With End Cut Carbide Rotary Bur-3/8"

(THA55038) Cylinder With End Cut Carbide Rotary Bur-3/8"Features: Tomahawk Carbide Burs are the highest industrial quality. Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 3/4"", Shank - 1/4"", OAL - 2-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$14.18
Click To Buy

Ball Nosed Cylinder Carbide Rotary Bur-1/8" x 1/2", Shank-1/8", OAL-1-1/2"

(THA55118) Ball Nosed Cylinder Carbide Rotary Bur-1/8" x 1/2", Shank-1/8", OAL-1-1/2"Features: Tomahawk Double Cut (alternate cut) Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 1/8"", Length of Cut - 1/2"", Shank - 1/8"", OAL - 1-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$5.47
Click To Buy

Ball Nosed Cylinder Carbide Rotary Bur-3/8"x3/4", Shank - 1/4", OAL-1-1/2"

(THA55138) Ball Nosed Cylinder Carbide Rotary Bur-3/8"x3/4", Shank - 1/4", OAL-1-1/2"Features: Tomahawk Carbide Burs are the highest industrial quality. Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 3/4"", Shank - 1/4"", OAL - 1-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$13.33
Click To Buy

Ball Carbide Rotary Bur- 3/8"x3/8", Shank-1/4", OAL-2-1/8"

(THA55238) Ball Carbide Rotary Bur- 3/8"x3/8", Shank-1/4", OAL-2-1/8"Features: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 3/8"", Shank - 1/4"", OAL - 2-1/8"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$10.95
Click To Buy

Tree Carbide Rotary Bur-1/8"x1/2", 1/8" Shank

(THA55518) Tree Carbide Rotary Bur-1/8"x1/2", 1/8" ShankFeatures: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 1/8"", Length of Cut - 1/2"", Shank - 1/8"", OAL - 1-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$5.47
Click To Buy

Tree Carbide Rotary Bur - 3/8" x 3/4", 1/4" Shank

(THA55538) Tree Carbide Rotary Bur - 3/8" x 3/4", 1/4" ShankFeatures: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 3/4"", Shank - 1/4"", OAL - 2-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$13.96
Click To Buy

Flame Carbide Rotary Bur

(THA55618) Flame Carbide Rotary BurFeatures: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 1/8"", Length of Cut - 5/16"", Shank - 1/8"", OAL - 1-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$5.47
Click To Buy

Ball Nosed Cone Carbide Rotary Bur-3/8"x1", Shank-1/4", OAL-3"

(THA55738) Ball Nosed Cone Carbide Rotary Bur-3/8"x1", Shank-1/4", OAL-3"Features: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 1"", Shank - 1/4"", OAL - 3"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$16.67
Click To Buy

Cone Carbide Rotary Bur

(THA55838) Cone Carbide Rotary BurFeatures: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 5/8"", Shank - 1/4"", OAL - 2-1/2"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length

$16.69
Click To Buy

Inverted Cone Carbide Rotary Bur

(THA55938) Inverted Cone Carbide Rotary BurFeatures: Tomahawk Double Cut or Alternate Cut Burs are the most popular burs in ferrous applications. Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers. The double cut offers much smoother operation and greater tool control. Also works well for fiberglass and rubber. Double Cut Burs (alternate cut) features very fine chip size, smooth operation (less vibration) and high cutting action Dimensions: Size - 3/8"", Length of Cut - 3/8"", Shank - 1/4"", OAL - 2-1/8"" Note: For size, the diameter of the head is given first and the length of cut second. OAL equals overall length.

$15.04
Click To Buy

6" Aluminum Oxide Bench Grinding Wheel - A80 Fine

(THA611VAOF) 6" Aluminum Oxide Bench Grinding Wheel - A80 FineFeatures: For general purpose grinding of ferrous metals, such as steel, iron, forgings, moly, etc. These wheels are packaged individually Dimensions: Diameter - 6"", Thickness - 1"", Hole Size - 1"", Max RPM -4,138

$18.29
Click To Buy

6" Aluminum Oxide Bench Grinding Wheel - A60 Medium

(THA611VAOM) 6" Aluminum Oxide Bench Grinding Wheel - A60 MediumFeatures: For general purpose grinding of ferrous metals, such as steel, iron, forgings, moly, etc. These wheels are packaged individually Dimensions: Diameter - 6"", Thickness - 1"", Hole Size - 1"", Max RPM -4,138

$17.51
Click To Buy

6" Aluminum Oxide Bench Grinding Wheel - A80 Fine

(THA6341VAOF) 6" Aluminum Oxide Bench Grinding Wheel - A80 FineFeatures: For general purpose grinding of ferrous metals, such as steel, iron, forgings, moly, etc. These wheels are packaged individually Dimensions: Diameter - 6"", Thickness - 3/4"", Hole Size - 1"", Max RPM -4,138

$18.29
Click To Buy

Ball Nosed Cylinder Aluma-Cut Bur (non-ferrous cut)

(THA65138) Ball Nosed Cylinder Aluma-Cut Bur (non-ferrous cut)Features: Features wide teeth spacing, reduced clogging of teeth and are ideal for nonferrous/soft materials. Tomahawk Aluma-Cut or Non-Ferrous Burs are used for deburring softer non-ferrous metals and non-metallic materials. This design provides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber and most plastics. The wide clearance and end mill type geometry of the flutes promotes fast stock removal with minimum loading Dimensions: Size - 3/8"", Length of Cut - 3/4"", Shank - 1/4"", OAL - 2-1/2""

$17.35
Click To Buy