The Store

The Repair 18 Auto/Boat/Plane Section

Premium Red Air Hose - 1/2" x 50'', 200 PSI

(GY1250R) Premium Red Air Hose - 1/2" x 50'', 200 PSIFeatures: 200 PSI working pressure No end guards 1/2"" male x 1/2"" male ends Made in the USA

$45.18
Click To Buy

Twin Welding Hose - 1/4" x 50''

(GYWH1450) Twin Welding Hose - 1/4" x 50''Features: Premium grade hoses Made in the USA

$42.93
Click To Buy

Sav-A-Thread HT - Ford 5.4 and 4.6 Liter Spark Plug Thread Repair

(HEL5396-14) Sav-A-Thread HT - Ford 5.4 and 4.6 Liter Spark Plug Thread RepairFeatures: M14 x 1.25 spark plug thread repair. Designed for ""Half Thread"" (HT) spark plug applications in 4.6 and 5.4 liter engines. Allows access to deep ports. Positive mechanical locking feature ensures insert stability; insert will not come out. Utilizing the piloted reamer tap, alignment is maintained and pre-drilling is not required. Note: It is recommended that the head be removed before installation to ensure chips do not enter the cylinder. Kit contents: Piloted reamer tap (1) Steel installation tool (1) Expanding tool (1) M14x1.25 HT inserts (12)

$217.78
Click To Buy

Drill-Out Power Bolt Extractor - 4 Piece Kit

(HEL80-401) Drill-Out Power Bolt Extractor - 4 Piece KitFeatures: Drill-Outis a drill bit and extractor in one. The drill bit is made from high quality heat treated steel - allows you to drill into even Grade8 and stainless steel bolts. The extractor is made from hard,flexible die steel which allows it to bite into any bolt or stud without slippng or stripping. Uses the power of your drill to extract the bolt Only requires shallow drilling depth so there is less chance of going off-center and less drilling time Specially designed drill tip will not walk or wander Includes four sizes: 1/4""-6mm, 5/16""-8mm, 3/8""-10mm and 1/2""-12mm. Carrying case included.

$42.66
Click To Buy

Micro Drill-Out Power Bolt/Screw Extractor- 4 Piece Kit

(HEL80-450) Micro Drill-Out Power Bolt/Screw Extractor- 4 Piece KitFeatures: Has many of the same features of the standard Drill-Out Power Extractors but designed for removing smaller damaged fasteners. Simple to use - drill hole with special left hand drill bit-end, flip bit over, bring drill up to correct speed and engage the extractor bit-end into hole to extract the broken fastener. Includes (4) Micro Drill-Outs to extract the following size fasteners: #5, #6 or M3; #8 or M4; #10, #12 or M5; 1/4"" or M6

$39.35
Click To Buy

3 Pc. Internal/External Snap Ring Pliers Set - 1/4" to 4"

(HIT1265K) 3 Pc. Internal/External Snap Ring Pliers Set - 1/4" to 4"Features: Patented push button internal and external design for quick and easy conversion. Patented broached jaws for positive ring control and stability. Dependable solid plier jaws. Precision plier joint pilot. Accurate alignment of tips. Includes a complete set of replacement tips (straight, bent, 90 degree) Made in USA. Includes: Hi-Tech 65, Ratchet Lock Retaining Ring Pliers Hi-Tech 1234 Retaining Ring Pliers Hi-Tech 1221S Retaining Ring Pliers Molded Case

$82.61
Click To Buy

Large Snap Ring Plier, Ratchet Lock

(HIT65) Large Snap Ring Plier, Ratchet LockFeatures: For internal ring sizes 1-13/16"" - 4"" For external ring sizes 1-1/2"" - 4"" Ratchet lock Made in U.S.A.

$41.09
Click To Buy

Snap Ring Plier - X-Large

(HIT87) Snap Ring Plier - X-LargeFeatures: For internal ring sizes 3-1/2"" through 7"" For external ring sizes 3-1/2"" through 7"" Compound screw-lever for additional force in working with extra large rings. Heat treated alloy steel components. 6 pairs of replaceable alloy steel tips with hex wrench in handy tip kit pouch.

$65.53
Click To Buy

Stud Welding Starter Kit

(HS4500) Stud Welding Starter KitFeatures: Great starter set-up for the progressive bodyman 2 year limited warranty Includes: Stud Gun (No. 4590), Posi-Cam Slidehammer(No. 4516), stud tip (No. 1004), Flexpert studs (No. 1001)

$223.82
Click To Buy

Uni-Spotter Stinger Plus Stud Welding Kit

(HS5500) Uni-Spotter Stinger Plus Stud Welding KitFeatures: A great mid-range kit with the most powerful lightweight gun available. 2 year limited warranty Includes: Stud Gun (No. 5590), Deluxe ""T"" handle slidehammer (No. 1016), 2.2mm Black head studs (No. 1000), 2.2mm Flexpert studs (No. 1001), Mold rivets (No. 1003), Stud tip (No.1004), Mold rivet tip (No. 1005), Shrink tip (No. 1007), Eliminator Side-by-Side adapter with Extend-a-Tip (No. 1040), Mini-Pull''r (No. 1095). Comes in a molded case.

$374.09
Click To Buy

Air-Hydraulic Power Set Rivet Gun

(HUCAK175A) Air-Hydraulic Power Set Rivet GunFeatures: The smallest yet most powerful air-reciprocating hydraulic riveter ever made, the AK175A installs steel rivets of up to 1/4 inch diameter with 3,500 lbs. og pulling force. Designed for long life and manufactured to the highest standards of quality, the AK175A is a true breakthrough in air-powered riveting tools. Compact, lightweight (28 ounces), and powerful (3,500 pounds of pulling force). Full 5/8 inch travel permits installing most rivets in a single cycle. Unique jaw system accomidates 1/8"" through 1/4"" rivet sizes by simply changing the nose assembly (no tools required). Operates at normal shop air pressures of 90 to 120 psi. Patented design.

$309.10
Click To Buy

Hand Operated Hydraulic Riveter Kit

(HUCHK150A) Hand Operated Hydraulic Riveter KitFeatures: The HK150-A Kit consists of a manually operated, hydraulically powered installation tool and inserts for a variety of rivets. Up to 3500 lbs. of power. Sets aluminum, steel and stainless steel rivets through 1/4"". Sets 3mm through 3/8-24 TSN(r) style threaded inserts in steel or aluminum. Weight is 18oz and stroke of .63"".

$219.78
Click To Buy

Quick Set Riveter Kit for Plastic Rivets

(HUCPR75K) Quick Set Riveter Kit for Plastic RivetsFeatures: This lightweight patented tool is designed for one-hand operation and will set most plastic rivets in one stroke. The PR75 provides access to areas not accessible with lever type tools. Will not damage painted finishes or easily marred surfaces Comes with riveter, carrying case, started pacs of 5mm, 6.3mm, and 6.6mm plastic rivets to cover most Ford, Chrysler and GM applications.

$62.09
Click To Buy

Hustler Straight Line Air Sander

(HUT2000) Hustler Straight Line Air SanderFeatures: Straightline, Reciprocal Action. The only 2-Cylinder, common piston Straightline with vertically-engaged, twin-drive gears. Lack of ""rolling gears"" common to all other straightlines eliminates ""humping and jumping"" at the end of each reciprocal stroke. Two in-line Cylinders, micro-honed to eliminate cylinder-wall drag, power an oversized high-alloy piston. Double rack and pinion gear assemblies give twice normal gear contact for maximum balance and thrust. These precision assembled components make the HUSTLER a superb all-purpose straightline with sychronized strokes so smooth and powerful it gets lighter with use. Specifications: SPM: 3000 Wt: 6lbs. 4oz. Air Consumption: 6.2 cfm @ 90PSI Noise Level: 90 dBa 90 Day Warranty Pad size: 2-3/4"" x 16-1/2""

$268.27
Click To Buy

Hustler II Mini Straight Line Air Sander

(HUT2023) Hustler II Mini Straight Line Air SanderFeatures: Straightline Action. Smaller version of the 2000 HUSTLER with unique triple counterbalance system to insure smooth and powerful sanding. Newly designed Motor specifically structured for mini-straightline strokes provides unexcelled power without battering the surface. 2-Cylinder, twin-drive, with vertically-engaged gears, ensures pure reciprocal strokes so smooth that coarse sanding, ultra-fine sanding, or blemish removal are a matter of adjusting the speed and choosing the right grit. For use with PSA/Velcro type paper only. Specifications: SPM: 2000 Wt: 4lbs. 13oz. Air Consumption: 4.4 cfm @ 90 PSI Noise Level: 78dBa 90 Day Warranty Pad Size: 2-3/4"" x 8""

$268.49
Click To Buy

Composite Body Random Orbit Air Super Sander III

(HUT3500) Composite Body Random Orbit Air Super Sander IIIFeatures: Random Orbit Action. Designed for today''s needs. The Super Sander III offers the same ultra-fine finishing as the 4500 in a lightweight-low profile configuration. Composite motor housing and shroud reduce weight and insulate the operator from vibration. Ultra smooth motor with positive action drive and unique 4 bearing support insures full contact sanding. Oversized drive head eliminates pad wobble. Built-in pad release feature. Specifications: RPM: 10000+ Wt: 2lbs. 3.5oz Air Consumption: 11.0 cfm @ 90 PSI Noise Level: 80 dBa 90 Day Warranty 6"" PSA Pad

$194.35
Click To Buy

Random Orbit Action Air Super Sander

(HUT4500) Random Orbit Action Air Super SanderFeatures: Random Orbit Action. Researched and Developed for Ultra-Fine Finishing. Flex-cover gives comfortable grip, prevents stiff fingers. Low Profile, vibration-free motor insures full contact sanding. Unique Air Efficiency System. Positive-Action Drive supported by 4-special bearings generates more power on less air. Over-size Drive Head eliminates pad-wobble for full contact Sanding. New positive air-control valve. Built-in pad release feature. Note: Does not include handle. See Hutchins'' 1839 for correct handle. Specifications: RPM: 10000+ Wt: 3lbs. 5oz. Air Consumption: 9.8 cfm @ 90 PSI Noise Level: 79 dBa 90 Day Warranty 6"" PSA Pad

$206.85
Click To Buy

Random Orbit Action Air Super Sander II

(HUT4560) Random Orbit Action Air Super Sander IIFeatures: Random Orbit Action. A more aggressive version of the Model 4500 for those who want to do a superior job faster. A newly designed Air-Efficient motor with Positive-Action Drive backed by 4-support bearings powers a unique oversize drive head for full contact sanding. Best for detailing, feathering and leveling-does great finishing, too! New positive air-control valve. Built-in pad release feature. Note: Does not include handle. See Hutchins'' 1839-1 for correct handle. Specifications: RPM: 10,000+ Wt: 3lbs. 5oz. Air Consumption: 9.8 cfm @ 90 PSI Noise Level: 79 dBa 90 Day Warranty 6"" PSA Pad

$215.70
Click To Buy

Waterbug III Random Orbit Air Sander

(HUT7544) Waterbug III Random Orbit Air SanderFeatures: Random-Orbit sander can be used wet or dry Uses standard vacuum hook type paper Through the pad water-feed, comes with water feed hose Save up to 50% wet sanding time while creating a flawless finish Weighs only 2-1/2 lbs

$264.35
Click To Buy

Multi-Option Hustler Straight Line Air Sander

(HUT8620) Multi-Option Hustler Straight Line Air SanderFeatures: Straightline Action (Reciprocal). A sophisticated, more versatile version of the standard Hutchins HUSTLER, with special refinements. Powerful twin-drive for perfect alignment, with 2-Cylinder reciprocal thrust impelled by vertically-engaged gears guarantees smooth synchronized strokes for superior surface preparation. Eliminates operator fatigue, while providing full contact sanding without battering the surface. Multi-Options include full COAXIAL Hose for choice of vacuum sanding, or dust-free sanding using a detachable Dust Bag for shops without vac-systems. Comes with Dust Bag. Optional Pierce Plates Sold Separately. Specifications: SPM: 3000 Wt: 7lbs. 1oz. Air Consumption: 6.0 cfm @ 90 PSI Noise Level: 87 dBa Pad Size: 2-3/4"" x 16-1/2"" 90 Day Warranty

$324.65
Click To Buy

"True Blue 93642" 2-Ton Hydraulic Service Jack

(HWW93642) "True Blue 93642" 2-Ton Hydraulic Service JackFeatures: Low 3.75"" pick-up height. High height of 20"". Removable one-piece handle. U-joint release mechanism for precise load control. In-line pump provides for the most efficient pumping operation. Cast iron lift arm for heavy duty loads. Automatic valve prevents overloading. Sealed hydraulic pump to protect from contamination. Full swivel rear casters for easy positioning. Flanged side plates increase strength. Made in USA.

$343.40
Click To Buy

3 Ton Heavy Duty Professional Service Jack

(HWW93652) 3 Ton Heavy Duty Professional Service JackFeatures: Heavy duty frame designed and built to withstand the most rugged applications. Longer chassis makes the HW93652 ideal for truck and SUV applications. New ""T"" type one piece handle for easy positioning and less lifting effort. Comes with foam handle pad. Sealed pump greatly reduces risk of dirt damaging pump seals. Hydraulic unit completely serviceable vs. welded desings with limited serviceability. Capacity: 3 tons Low Height: 4"" High Height: 23"" Reach: 78-1/2"" Cap Dia.: 6-3/4"" Handle Length: 50"" Chassis Length: 30-3/4"" Chassis Height: 7-1/4"" Wheel Base: 24"" Front Wheel Dia.: 3-3/4"" Caster Wheel Dia.: 2-1/2"" Weight: 110lbs.

$488.70
Click To Buy

Medium Wave Paint Curing Lamp - 1500 Watt

(INFSRU1615) Medium Wave Paint Curing Lamp - 1500 WattFeatures: Number one selling portable infrared unit 1500 Watts of curing power over a 2�? X 3�? coverage area - ideal for small area repairs Heavy-duty stand adjusts to over 6�? high for curing hoods and roof lines Now with conveniently located On/Off switch Parabolic reflector for uniform heat distribution Energy efficient, only pennies per hour to operate Underwriters Laboratories (U.L.) Listed Specifications: 120 Volts; 13 Amps; 36"" Head; 23 lbs.

$167.69
Click To Buy

Grease Joint Rejuvenator

(INN7862) Grease Joint RejuvenatorFeatures: Opens clogged grease joints and fittings. Tool forces any lightweight oil into grease joint opening relief slots from which old, clogged grease can escape. Comes in a wooden case with flex hose.

$31.73
Click To Buy

Gease Joint Rejuvinator Master Kit

(INN7863) Gease Joint Rejuvinator Master KitFeatures: Includes Professional Model (Part # 7862) & Pocket Model (7864) along with 5"" Flex Hose and extra Grease Coupler. For use on any application with a grease fitting. Unclogs and replenishes Bearings and Grease Joints on Trucks/Cars, off road Equipment, Farm Applications and many more. Lifetime Warranty Made in USA

$59.21
Click To Buy

20" Indexing Pry Bar - Long Hand

(INN7879) 20" Indexing Pry Bar - Long HandFeatures: Have you ever needed just the right amount of angle on a pry bar? Introducing the mechanics best friend, the Indexing Uni-Pry bar allows you to take on any job. Whether you are installing motor mounts, aligning transmissions or just needing to move something, the Uni-Pry Par will do the job. It also comes with a split head claw that can be used for nail extracting. No job is too big for the Uni-Pry Bar. Pry head will index in five positions. Indexing head locks into place for fixed angle. Thumb lever easily locks and releases pry head. Will handle up to 350 pounds of torque. Allows prying and support for most applications. Made of high carbon steel.

$34.82
Click To Buy