The Store

The Repair 19 Auto/Boat/Plane Section

GATOR JAWS Oil Filter Removal Pliers

(INN7899) GATOR JAWS Oil Filter Removal PliersFeatures: Reaches most hard-to-get-to filters. No more burns! If you have ever come across an oil filter that was over-tightened, you know how difficult the job can be to break it loose. GATER JAWS with its powerful jaws and 40 teeth will grab hold and loosen from a variety of angles without slipping. Tired of burning yourself? GATER JAWS with its long length (23 inches) has the ability to reach under and around hot manifolds and remove filters with ease.You�?ve never seen a wrench like GATOR JAWS. It has no equal. The most versatile on the market.

$41.22
Click To Buy

Fuse Saver

(INN8005) Fuse SaverFeatures: Allows you to move about the vehicle while checking for shorts in the electrical system 3 resetting breaker handles - 10, 15, and 20 amps Color matching handles for easy identification Dual type fuse box connector with 10 ft. cord Find short circuits FAST! Disconnect and reconnect power to any circuit while work is being completed in that circuit without leaving the work area Blow Molded Storage Case Made in USA

$60.57
Click To Buy

1/4" Stubby Standard Duty Air Ratchet Wrench

(IR103A) 1/4" Stubby Standard Duty Air Ratchet WrenchFeatures: The ""Stubby"" lets you squeeze into very snug spaces without feeling squeezed while you run small fasteners. Made to fit in the palm of your hand. Excellent for body shop repair jobs, light duty work under the dashboard, small engine repair, headlight service work, and bench work. Extra compact. So easy to maintain, just dip the head in oil. Specifications: 20 ft-lb. Maximum Torque. 1/4"" square drive. Free Speed 200 rpm. Weight 1.1 lb. (0.5 kg.) Length 6.5 in. (165 mm) Average Air Consumption 2.5 cfm, @ load 15 cfm. Sound (pressure/power) 88.0/99.0 dBA Air Inlet NPTF: 1/4 in. Min. Hose Size 3/8"" (10 mm)

$81.53
Click To Buy

1/2" Heavy Duty Air Ratchet Wrench

(IR1077XPA) 1/2" Heavy Duty Air Ratchet WrenchFeatures: Technologically advanced head design for extra durability. Up to 50 ft-lbs. torque, 160 RPM free speed Variable speed lever style throttle One year limited warranty Specifications: Torque range: 10-45 ft.-lbs. (14-61Nm) Max. torque: 50 ft.-lbs. (68 Nm) Free speed: 160 RPM Standard bolt cap: 3/8"" (10 mm) Net weight: 2.5 lbs. (1.13 kg) Overall length 10.5 in. (267 mm) Average air consumption: 4 cfm (112 l/min) @load: 18 CFM (504 l/min.) Sound (pressure/power): 92.5/105.5 dBA Air inlet: 1/4""

$109.59
Click To Buy

1/4" Composite Air Ratchet - The Little Tool with Big Performance

(IR1103) 1/4" Composite Air Ratchet - The Little Tool with Big PerformanceFeatures: Heat-treated components add durability and ensure long life Patented TwinPawlPlus head design maintains positive pawl engagement and prevents spreading and lock-up for consistent top performance Exclusive two speed power grip ring for convenient power output selection Composite housing maintains a comfortable temperature and low noise levels Lever-style modulated throttle provides precise control Textured, ergonomic grip area fits the palm of your hand 360 degree directionally controlled exhaust keeps air flow away from work area Plenty of power and speed, with 25 ft.-lbs. of maximum torque and 270 rpm

$128.03
Click To Buy

3/8" Composite Air Ratchet - The Little Tool with Big Performance

(IR1133) 3/8" Composite Air Ratchet - The Little Tool with Big PerformanceFeatures: Heat-treated components add durability and ensure long life Patented TwinPawlPlus head design maintains positive pawl engagement and prevents spreading and lock-up for consistent top performance Exclusive two speed power grip ring for convenient power output selection Composite housing maintains a comfortable temperature and low noise levels Lever-style modulated throttle provides precise control Textured, ergonomic grip area fits the palm of your hand 360 degree directionally controlled exhaust keeps air flow away from work area Plenty of power and speed, with 25 ft.-lbs. of maximum torque and 270 rpm

$125.96
Click To Buy

Standard Duty Air Hammer with 5 pc. Chisel Set

(IR116K) Standard Duty Air Hammer with 5 pc. Chisel SetFeatures: The economical air hammer for fast cutting action especially for medium exhaust work, panel cutting, and general repair work Up to 3,500 blows per minute Handles a range of cutting applications Longer life alloyed steel barrel and heat-treated piston Chisel set includes edging tool, tail pipe cutter, straight cutter, cutting chisel and a punch Air Hammer Specifications: Shank opening: .401"" (10.1 mm) Blows per minute @ 90 psi: 3500 Bore diameter: 11/16"" (17.5 mm) Stroke length: 2-5/8"" (67 mm) Weight: 3.4 lb. (1.54 kg) Length: 7.8"" (198 mm) Average air consumption: 3 cfm, 15 cfm @ load Sound (pressure/power): 104.4/117.4 dBA Air inlet: 1/4""

$56.64
Click To Buy

Standard Duty Air Hammer

(IR117) Standard Duty Air HammerFeatures: An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in air power regulator give you full control of the speed and power. Longer stroke piston Alloyed steel barrel and heat-treated piston for longer life. Up to 2,000 blows per minute Specifications: Blows per minute: 2,000 Stroke length: 3-1/2"" (89 mm) Weight: 4.1 lbs. (1.86 kg) Length: 9.9 (251) Average air consumption: 3 cfm, @ load 14 cfm Sound (pressure/power): 103.5/116.5 dBA Air inlet: 1/4""

$53.30
Click To Buy

Standard Duty Air Hammer with 5 pc. Chisel Set

(IR117K) Standard Duty Air Hammer with 5 pc. Chisel SetFeatures: An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in power regulator give you full control of the speed and power. Longer stroke piston Alloyed steel barrel an heat treated piston for longer life Up to 2,000 blows per minute Chisel set includes edging tool, tail pipe cutter, straight cutter, cutting chisel and a punch Air Hammer Specifications: Shank opening: .401"" (10.1 mm) Blows per minute @ 90 psi: 3500 Bore diameter: 11/16"" (17.5 mm) Stroke length: 3-1/2"" (89 mm) Weight: 4.1 lb. (1.86 kg) Length: 9.9"" (251 mm) Average air consumption: 3 cfm, 14 cfm @ load Sound (pressure/power): 103.5/116.5 dBA Air inlet: 1/4""

$61.53
Click To Buy

1/4" Drive Titanium Flathead Ratchet

(IR1215TI) 1/4" Drive Titanium Flathead RatchetFeatures: The new Ingersoll-Rand Titanium Flathead ratchet gets in and out of tight spaces easily, has a convenient forward and reverse switch and an enhanced head design that prevents spreading and contamination. Exclusive Titanium Flathead design for durability and long life Remote Fwd./Rvs. Switch for easy one handed operation 25 ft.-lbs. of maximum torque; 225 rpm

$164.80
Click To Buy

Super Duty Air Hammer Kit with 6 Chisels

(IR121K6) Super Duty Air Hammer Kit with 6 ChiselsFeatures: Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3,000 blows per minute. Professional touch trigger for total control. Long-life tool with a tough one piece alloy barrel. Easy to maintain, with an ""easy out"" throttle valve assembly. Kit includes: a blowmolded plastic case with a removable lid and 6 chisels.

$100.70
Click To Buy

3/8" Drive Titanium Flathead Ratchet

(IR1225TI) 3/8" Drive Titanium Flathead RatchetFeatures: The new Ingersoll-Rand Titanium Flathead ratchet gets in and out of tight spaces easily, has a convenient forward and reverse switch and an enhanced head design that prevents spreading and contamination. Exclusive Titanium Flathead design for durability and long life Remote Fwd./Rvs. Switch for easy one handed operation 25 ft.-lbs. of maximum torque; 225 rpm

$180.59
Click To Buy

Standard Duty Air Needle Scaler

(IR125) Standard Duty Air Needle ScalerFeatures: For surface preparation work involving the cleaning or removal of paint, rust, dirt, or weld slag, the Ingersoll-Rand 125 Standard Duty Needle Scaler is a durable, dependable, economical solution. Use the Ingersoll-Rand Needle Scaler for cleaning and removal of: Weld slag Metal surfaces Paint Rust Dirt Specifications: Type Needle Needle Quantity 19 Needle Size (in./mm) 1/8""/3.2 Free Speed (rpm) 4,600 Bore Diameter (in./mm) 1""/25 Stroke Length (in./mm) 1-1/8""/28.6 Net Wt. (lbs./kg) 6.22/2.82 Overall Length (in./mm) 18.3/465 Av. Air Consump. (cfm/l/min.) 8/226 Sound dB(A) (pressure/power) 99.6/112.6 Air Inlet (in.) 1/4 Min. Hose Size (in./mm) 5/16""/8

$169.31
Click To Buy

Mini 1/4" Drive Air Impact Kit

(IR2101K) Mini 1/4" Drive Air Impact KitFeatures: Drive: 1/4 in Max. Torque (Reserve): 50 ft.-lbs. / 68 Nm Torque Range: 25-40 ft-lb / 34-54 Nm Free Speed: 11,000 rpm Blows per Min: 1,250 Standard Bolt Capacity: 5/16"" Net Weight: 1.37 lbs / 0.62 kg Kit Weight: 3.0 lbs / 1.36 kg Overall Length: 6.25"" Sound dBA (pressure / power): 83.6 / 94.6 Avg. Air Consumption: 1.76 cfm @ Load: 18.17 scfm Air Inlet: 1/4"" Min. Hose Size: 3/8"" Kit Includes: 1- 2101 Mini 1/4"" Air Impact Wrench 1- 10-piece SAE/Metric Combo Socket Set 1- Tool tray for storage.

$138.68
Click To Buy

Titanium ''n'' Torque (T''N''T) Ultra Duty 3/8" Impact Wrench

(IR2115TI) Titanium ''n'' Torque (T''N''T) Ultra Duty 3/8" Impact WrenchFeatures: TOUGHER - Titanium means the tool will stand up under the toughest enviroments. (IR even dragged it behind a car just to be sure.) STRONGER - T''N''T Torque of 280 ft.-lbs. The IR 2115TI has the highest power-to-weight ratio of all other 3/8"" impact guns. SMALLER - 1.97"" wide at the hammer case. The IR 2115TI is smaller than other tools in the full size 3/8"" impact category. Allowing users to get into and out of the tightest spots. LIGHTER - 2.4 lbs. The IR 2115TI weighs less than any competitive 3/8"" impact.

$270.89
Click To Buy

3/8" Super Duty Air Impact Wrench

(IR212) 3/8" Super Duty Air Impact WrenchFeatures: Tremendous power and longer life make this wrench the popular choice for professional mechanics. The Single Hammer Impact Mechanism removes and replaces bolts up to 7/16"" without a struggle. Power up to 180 ft-lbs. Unaffected by air pressure changes More torque, less vibration Pistol style, yet extremely compact and lightweight Built-in power regulator prevents over-torqueing Handle exhaust Specifications: Working torque: 20-150 ft.-lbs. (27-204 Nm) Maximum torque: 180 ft.-lbs. (245 Nm) Blows per minute: 1,500 Free speed: 10,000 RPM Weight: 2.89 lbs. (1.31 kg) Length: 6"" (152 mm) Average air consumption: 2.5 cfm, 11 cfm @ load Sound (pressure/power): 97.5/110.5 dBA Air inlet: 1/4""

$159.73
Click To Buy

Mini 1/2" Drive Titanium Impact Wrench with "Quiet Technology"

(IR2125QTI) Mini 1/2" Drive Titanium Impact Wrench with "Quiet Technology"Features: Quiet Technology - Titanium impacts have all the performance and features you have come to expect from the IR family of titanium tools. New patent pending quiet technology preserves maximum torque output with reduced noise levels compared to traditional impact tools. TOUGHER: Titanium means this tool will stand up under the toughest environments STRONGER: TNT Torque - The titanium tools have the highest power-to-weight ratio of all other impacts in their class SMALLER: Narrow hammer case for greater access to tight areas LIGHTER: Titanium provides incredible strength in a lightweight alloy 280 ft.-lbs. maximum torque.

$283.79
Click To Buy

1/2" Heavy Duty Air Impact Wrench

(IR2130) 1/2" Heavy Duty Air Impact WrenchFeatures: The new IR2130 has all the performance and features you have come to expect from the IR family of Impact Wrenches. This Impact features a powerful twin hammer mechanism and a new composite housing, yielding superior ergonomics in a lightweight package. 600 ft.-lbs. of maximum Torque Full stroke tease throttle Easy glide forward/ reverse switch Multi position power management Lightweight reinforced aluminum hammercase; weight only 4.2 lbs.

$202.21
Click To Buy

Titanium ''n'' Torque (T''N''T) Ultra Duty 1/2" Air Impact Wrench with Extended Anvil

(IR2135TI2) Titanium ''n'' Torque (T''N''T) Ultra Duty 1/2" Air Impact Wrench with Extended AnvilFeatures: Two-inch extended anvil for tire service applications.

$292.19
Click To Buy

3/4" Super Duty Air Impact Wrench

(IR2141) 3/4" Super Duty Air Impact WrenchFeatures: Ingersol Rand redefines the category with the lightest, most compact 3/4"" impacts tool in the industry. Stronger: Maximum torque of 1200 ft.-lbs. The highest power to weight ratio of all 3/4"" impacts. Lighter: 7 lbs. The IR 2141 weigh less than any competitive 3/4"" impact. In fact, its closest competitor weighs 75% more Tougher: The patented Twin Hammer PLUS mechanism is 30% more durable than other twin hammer mechanisms

$503.04
Click To Buy

3/8" Heavy Duty Air Impact Wrench

(IR215) 3/8" Heavy Duty Air Impact WrenchFeatures: Combines power and economy for general service applications. It provides adjustable power output in foward and reverse with handle exhaust to direct air away from the operator and the work. 160 ft.-lbs. of maximum torque Two-piece housing for easy service Comfortable ergonomic handle design Specifications: Working torque: 15-300 ft.-lbs. (20-176 Nm) Maximum torque: 160 ft.-lbs. (217 Nm) Blows per minute: 1,600 Free speed: 9,500 RPM Weight: 2.89 lbs. (1.31 kg) Length: 6.125"" (156 mm) Average air consumption: 3 cfm, 13 cfm @ load Sound (pressure/power): 80.6/93.6 dBA Air inlet: 1/4""

$137.06
Click To Buy

3/8" Super Duty Butterfly Impact Wrench

(IR216) 3/8" Super Duty Butterfly Impact WrenchFeatures: Power and durability from the palm of your hand as you work in cramped, difficult spaces. A small wrench, its ideal for transmission, body panel, exhaust system, and small engine repair. The butterfly-style throttle valve lets you adjust speed smoothly in either direction in one continuous motion. Butterfly throttle controls foward and reverse speeds Small compact size to get into tight spaces 175 ft.-lbs. maximum torque Innovative rear inlet keeps tool size compact and allows better tool balance Specifications: Working torque: 15-160 ft.-lbs. (20-176 Nm) Maximum torque: 175 ft.-lbs. (217 Nm) Blows per minute: 1,800 Free speed: 8,000 RPM Weight: 2.89 lbs. (1.31 kg) Length: 6.125"" (156 mm) Average air consumption: 3 cfm, 13 cfm @ load Sound (pressure/power): 97.5/110.5 dBA Air inlet: 1/4""

$145.13
Click To Buy

3/4" Ultra Duty Air Impact Wrench

(IR2161XP) 3/4" Ultra Duty Air Impact WrenchFeatures: Combines a six-vane high output air motor, through-bolt construction, ergonomic handle and housing design to create an impact tool that offers increases power and durability like no other. Most durable 3/4"" impact in the industry Maximum torque - 1,250 ft.-lbs., 6,000 RPM, 1,025 BPM Full power reverse 3-position power regulator 360 degree swivel inlet

$700.15
Click To Buy

1" Drive Super Duty Impact Wrench with 6" Ext. Anvil - Ergo Grip Design

(IR2190TI-6) 1" Drive Super Duty Impact Wrench with 6" Ext. Anvil - Ergo Grip DesignFeatures: Extended, robust bushing is at least 2 times more durable for extended life. Lighter weight in front of the gun .33 lbs lighter vs. IR2080-6, .58 lbs lighter vs. IR2080 Titanium hammer case weighs less and provides greater durability Coarse threading reduces stripping 7-Vane motor delivers 1,600 ft-lbs max torque Ergonomic ""Chainsaw"" handle and grip for better control and comfort Net weight: 15.5 lbs Weighs up to 14.7 lbs less than CP797-6 6,800 rpm 21.5"" long Power settings: 3 forward, 1 reverse Made in USA

$742.46
Click To Buy

1/2" Super Duty Air Impact Wrench

(IR231C) 1/2" Super Duty Air Impact WrenchFeatures: This classic is the most popular tool in its class. Introduced over 25 yeas ago and continuously refined, it offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economy. Exclusive impact mechanism. Pressure-feed lubrication. Adjustable power regulator. Easy to service two-piece construction. Contoured handle for comfort and control. Specifications: Maximum Torque: 425 ft.-lb. Avg. Free Speed: 8,000 rpm Weight: 5.8 lbs. (2.63 kg) Length: 7.3"" (185 mm) Avg. Air Consumption: 4.2 cfm Minimum @ load: 22 cfm Sound (pressure/power): 102/115 dBA Inlet NPTF: 1/4"" Hose Size: 3/8"" (10 mm)

$128.99
Click To Buy

1/2" Super Duty Air Impact Wrench

(IR231HA) 1/2" Super Duty Air Impact WrenchFeatures: This model redefines the standards set by the classic IR231 model, with an enhanced Twin Hammer impact mechanism for more power, and in-handle exhaust to direct air away from the operator and the work area. 450 ft.-lbs. maximum torque. Pressure feed system provides continuous lubrication. Variable power control in forward and reverse. Increased durability, quieter operation, and more comfortable handle contour.

$130.61
Click To Buy