The Store

The Repair 25 Auto/Boat/Plane Section

6" Digital Caliper with Large LCD Face

(KD3756) 6" Digital Caliper with Large LCD FaceFeatures: LCD displays up to 5 digits. 4 way measurement, inside, outside, depth and step. Resolution: / Repeatability .0005 x .01mm. Stainless steel frame, hardened jaws, glass window over LCD for protection. Includes fitted case.

$40.64
Click To Buy

Digital Break Rotor Gauge

(KD3774) Digital Break Rotor GaugeFeatures: Measures break Rotors and ball joints. 6"" 150MM length, 3-1/2 throat depth. Range: .0005"" / .01mm.

$90.24
Click To Buy

Gear Plier - 7 Pc. Multi-Function Plier Set

(KD3835) Gear Plier - 7 Pc. Multi-Function Plier SetFeatures: The GearPlier combines fine ratcheting action (180 teeth) with interchangeable tips to provide unmatched performance and flexibility when compared to all other specialty pliers. The Plier itself is made from cast stainless steel for strength and durability. It features a dual material grip for comfort and to minimize slip. The set comes packaged in a blow-mold case and includes the unique block and rail storage system to hold tips for easy access. The KD 3835 7pc GearPlier Set includes: GearPlier Handle 2 Hose Clamp Tips (Cable and Angled) 2 Spark Plug Boot Puller Tips Fuse and Module Puller Tip Push-Pin Puller Tips for Removal of Plastic Anchors

$115.78
Click To Buy

15 Piece GearPlier Master Set

(KD3836) 15 Piece GearPlier Master SetFeatures: Combines fine ratcheting action (180 teeth) with interchangeable tips to provide unmatched performance and flexibility. Plier made from cast stainless steel. Quick release collars provide quick and easy interchange. Cable Hose Clamp Tip included. Push Pin Tip included for easy removal of plastic anchors. Plier System Includes: 4 Hose Clamp 3 Spark Plug 1 Hog Ring 1 Push Pin 1 Fuse and Module Relay 1 Piston Ring Compressor 1 Valve Stem Puller 1 Brake Spring 1 Hose Pinch Off

$173.83
Click To Buy

7 Pc. Magnetic Oil Drain Plug Socket Set

(KD3870) 7 Pc. Magnetic Oil Drain Plug Socket SetFeatures: Magnetic Socket Core Holds Drain Plug During Use - This Keeps Hands and Drain Plug out of Hot Oil and allows for easier one handed plug removal and installation. Contains the most popular metric sizes (13mm - 19mm) for oil drain applications. Sockets are color coded for easy identification. Quick change design with included GearRatchet handle or use with any 3/8"" drive ratchet. GearRatchet handle only requires 5�?? swing arc. Set can also be used for a number of special access situations where this tools low profile design and magnetic core are an advantage. Set comes complete in a blow molded case. Kit includes: 13mm Plug Socket - Red, 14mm Plug Socket - Green, 15mm Plug Socket - Purple, 16mm Plug Socket - Gold, 17mm Plug Socket - Black, 19mm Plug Socket - Blue and 3/8"" (20mm) Drive GearRatchet Handle.

$50.94
Click To Buy

5 Pc. Tap and Die Drive Tool Set

(KD3880) 5 Pc. Tap and Die Drive Tool SetFeatures: Kit includes: Tap and Die Ratcheting ""T"" Wrench, Small Tap Adapter, Medium Tap Adapter, Die Adapter and Sliding ""T"" for adapters.

$45.47
Click To Buy

GearWrench 40 Piece Tap & Die Set - Fractional with Ratcheting T Handle

(KD3885) GearWrench 40 Piece Tap & Die Set - Fractional with Ratcheting T HandleFeatures: Carbon Steel Sturdy Blow Molded Case Index Holders for Taps All Taps and Dies Lock in Place All Kits Feature the 3880 Ratcheting ""T"" Wrench and Adapters Fractional sizes #4 through 1/2"" Taps and Dies

$92.24
Click To Buy

GearWrench 40 Piece Tap & Die Set - Metric with Ratcheting T Handle

(KD3886) GearWrench 40 Piece Tap & Die Set - Metric with Ratcheting T HandleFeatures: Carbon Steel Sturdy Blow Molded Case Index Holders for Taps All Taps and Dies Lock in Place All kits feature the 3880 Ratcheting ""T"" Wrench and Adapters Metric sizes 3 through 12 mm Taps and Dies

$92.24
Click To Buy

GearWrench 75 Piece Tap & Die Set - Metric & Fractional with Ratcheting T Handle

(KD3887) GearWrench 75 Piece Tap & Die Set - Metric & Fractional with Ratcheting T HandleFeatures: Carbon Steel Sturdy Blow Molded Case Index Holders for Taps All Taps and Dies Lock in Place All kits feature the 3880 Ratcheting ""T"" Wrench and adapters Fractional and Metric sizes #4 through 1/2"" and 3 through 12mm Taps and Dies

$154.74
Click To Buy

2 Pc. 6.0-L Fan Clutch Pulley Holder

(KD3950) 2 Pc. 6.0-L Fan Clutch Pulley HolderFeatures: This kits is designed for fan clutch removal on newer Ford applications equipped with the 6.0 liter Powerstroke diesel engine available since 2003. The unique design and components of the tools included in this kit give the user the ability to grip and securely hold the pulley housing while applying torque to the 47mm clutch nut for loosening and removal. Designed for Fan Clutch removal on 2003 and above Ford 6.0L Powerstroke engines. Unique Fan Clutch Wrench grips and securely holds the pulley housing. Fan Clutch Holding Tool to loosen and remove oval or round hole holding nut.

$32.90
Click To Buy

12 Piece, Fuel and Transmission Line Disconnect Tool Kit

(KD41500) 12 Piece, Fuel and Transmission Line Disconnect Tool KitFeatures: Disconnect tools that separate fittings on fuel, filter, transmission, air conditioning systems and fuel tank return lines on most vehicles, trucks and other heavy equipment Kit Contents: 3321 GM & Ford Disconnect Tool, 3408 Ford Fuel Line Coupling Tool, 3413 Ford Hydraulic Clutch Line Disconnect Tool, 3890 Chrysler Quick Disconnect Coupler Tool, 3891 Ford EFI Fuel Line with Hair Pin Connector Tool, 3892 GM Hydraulic Clutch Line Disconnect Tool, 3893 GM Transmission Oil Cooler Line Disconnect Tool, 3894 Ford Oil Cooler Line Disconnect Tool, 3895 Fuel Line Disconnect (Black), 3896 Fuel Line Disconnect (Red), 3897 Fuel Line Disconnect (Gold), 3898 Oil Cooler Line Disconnect (Blue), and 41513 Replacement Bands

$32.90
Click To Buy

Rear Brake Caliper Kit

(KD41540) Rear Brake Caliper KitFeatures: Set designed for vehicles with brake pistons that are mechanically tied to the parking brake and require a turning action to push back. Set covers most domestic and import vehicles Kit Contents: 41541 Applicator and Pad, 41542 Adapter 0 (2-1/2"" 1 Pin), 41543 Adapter 2 (2"", 3 Pin), 41544 Adapter 3 (2-1/4"" 3 Step), 41545 Adapter 4 (1-1/4"", 2 Pin), 41546 Adapter 5 (1-3/8"", 2 Pin 3/8"" Drive), 41547 Adapter 6 (1-5/8"", 2 Pin (L)), 41548 Adapter 7 (1-5/8"", 2 Pin (S)), 41549 Adapter 8 (1- 7/8"", 1 Pin), 41550 Adapter P (2-1/4"", 1 Pin)

$42.17
Click To Buy

Fan Clutch Service Kit

(KD41580) Fan Clutch Service KitFeatures: This versatile kit covers most vehicles with bolt or pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing. Features the patented 35W universal pulley holder. Kit includes: Universal Pulley Holder, Pin Set Small (5 x 8mm), Pin Set Large (Cam Pins, 6 x 10mm, 7.5 x 18mm), 22mm Fan Nut Wrench, 36mm Fan Nut Wrench, 40mm Fan Nut Wrench, 47mm Fan Nut Wrench and a 50mm Fan Nut Wrench.

$71.27
Click To Buy

Master Bolt Grip Kit - Multi-Use Puller Kit

(KD41600) Master Bolt Grip Kit - Multi-Use Puller KitFeatures: Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUVs, and small engines. Kit Contents: Two or three way yoke 4 pc. tip set Metric bolt set SAE bolt set Center screw for puller (2)

$40.39
Click To Buy

Steering Wheel Puller Kit

(KD41620) Steering Wheel Puller KitFeatures: This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles Contents: Steering Wheel Puller Yoke and Screw Extension Bushing Pivot Pin Lock Plate Removal Tool 2 Pc. Puller Leg Package Lock Plate Remover Collars and Nut Washer Lock Place Depressor Frame Screw Package

$34.16
Click To Buy

Bearing Race and Seal Driver Kit

(KD41630) Bearing Race and Seal Driver KitFeatures: Allows you to install tapered bearing races and seals without damage to the component or housing Includes a driver handle plus 9 popular bearing and seal drivers ranging from 1.565"" to 3.180""

$40.71
Click To Buy

7 Piece, Deep Axle Nut Kit

(KD41650) 7 Piece, Deep Axle Nut KitFeatures: These 7 extra long 1/2"" drive 6 point metric sockets are ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Kit contents: 29, 30, 32, 34, 35, 36, and 38mm. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removable hinged style lid allows for convenient storage in tool box drawers. Applications: 30mm Axle Nut Socket - services GM body styles A, J, and N, plus Asian imports 36mm Axle Nut Socket - services many GM, Ford, and Chrysler full-size vehicles 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles 34mm Axle Nut Socket - services many GM mid-size vehicles 29mm Axle Nut Socket - services late model GM, Ford, and Asian imports 35mm Axle Nut Socket - services many GM vehicles 38mm Axle Nut Socket - services various full-size vehicles including SUVs

$52.41
Click To Buy

Front End Service Kit

(KD41690) Front End Service KitFeatures: This versatile set allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints Kit Contents: 2289 Pitman Arm Puller 22 x 140mm, 3533 Tie Rod Puller, 3916 Universal Ball Joint Separator, 3917 Tie Rod End Puller and Pitman Arm Puller, and 3918 Universal Tie Rod End Remover

$83.76
Click To Buy

Slide Hammer Puller Kit

(KD41700) Slide Hammer Puller KitFeatures: This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow Flange Deep Flange Slide Hammer 2 Way Yoke 3 Way Yoke Center Bolt and Cone 3 Pc. Adapter Set Leg Package with Screws

$76.17
Click To Buy

8 Piece, Master Sensor Socket Kit

(KD41720) 8 Piece, Master Sensor Socket KitFeatures: Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches. Provides coverage for lower profile Chrysler 02 sensors. Includes 1-3/16 in. (29mm) 1/2 in. drive oil sensor socket. Includes 7/8 in. (22mm) slotted 3/8 in. drive PVS, TVS, and 02 socket. Includes a driver handle plus 9 popular bearing and seal drivers. Bearing and seal driver sizes include 1.565 in., 1.750 in., 1.961 in., 2.325 in., 2.470 in., 2.555 in., 2.830 in., 2.995 in. and 3.180 in. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removeable hinge style lid allows for convenient storage in tool box drawers.

$39.67
Click To Buy

3 Pc. Body Clip Set

(KD41850) 3 Pc. Body Clip SetFeatures: Kit includes: 30�?? Push Pin Plier, 80�?? Push Pin Plier and a Panel Clip Plier with ""V"" design for removal of standard upholstery clips without center push pins.

$35.80
Click To Buy

3 Piece, GearWrench Full Polish Ratchet Set

(KD81206) 3 Piece, GearWrench Full Polish Ratchet SetFeatures: 3 Piece, Full Polish Ratchet Set (1/4"", 3/8"" and 1/2"" Drive) Full Polished Ratchet features low profile head which allows for greater comfort and access Ratchet features flush mounted reversing lever for greater access 60 Tooth Gear System allows for greater access Backed by a Lifetime Warranty

$86.11
Click To Buy

3 Piece, GearWrench Cushion Grip Ratchet Set

(KD81207) 3 Piece, GearWrench Cushion Grip Ratchet SetFeatures: 3 Piece, Cushion Grip Ratchet Set (1/4"", 3/8"" and 1/2"") Cushion Grip Ratchet features low profile head which allows for greater comfort and access Ratchet features flush mounted reversing lever for greater access 60 Tooth Gear System allows for greater access

$109.33
Click To Buy

Piston Ring Compressor Set

(KD850) Piston Ring Compressor SetFeatures: Install pistons from 2-7/8 to 4-3/8"" (73 to 111mm). Pliers can be used parallel or perpendicular to the cylinder block. Fine-tooth ratcheting lock allows you to compress bands in small increments. Set works by placing a band around the piston, covering the rings and hooking pliers into the band and squeezing. With the band tightly around the piston, insert piston into cylinder and tap lightly with hammer handle to install. Set includes pliers and 6 bands, 1119 through 1124.

$52.92
Click To Buy

1/4" GearWrench Micrometer Torque Wrenches

(KD85050) 1/4" GearWrench Micrometer Torque WrenchesFeatures: Sealed tear drop design keeps out contaminants for superior performance and life and provides better access over round head designs. +/- 3% accuracy. Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. One finger operated reversing lever. Pliable elastometer handle grip for comfort and oil resistance. Includes blow molded storage case. 30-200 in.-lbs., 10"" Length.

$90.24
Click To Buy

3/8" GearWrench Micrometer Torque Wrench

(KD85051) 3/8" GearWrench Micrometer Torque WrenchFeatures: Sealed tear drop design keeps out contaminants for superior performance and life and provides better access over round head designs. +/- 3% accuracy. Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. One finger operated reversing lever. Pliable elastometer handle grip for comfort and oil resistance. Includes blow molded storage case. 25-250 in.-lbs., 13.8"" Length.

$87.40
Click To Buy