The Store

The Repair 3 Auto/Boat/Plane Section

3/8" Right-Angle Air Drill Reversible

(AP510AHT) 3/8" Right-Angle Air Drill ReversibleFeatures: 90 degree angle head design Compact design for close clearance operation 2 gear drive system Lightweight for fatigue free handling Specifications: Free speed: 1,600 RPM Overall length: 8-1/4"" (210 mm) Net weight: 2 lbs. (0.91 kg) Motor HP: 1/2"" Air inlet thread NPT: 1/4"" Average air consumption: 4 CFM Working air pressure: 90-120 PSI

$83.21
Click To Buy

20 Ton Low Profile Air/Manual Bottle Jack

(AP5304) 20 Ton Low Profile Air/Manual Bottle JackFeatures: Designed for operating either manually or pneumatically. Air hose can swivel in any direction of connection from air source. Fitted with a safety valve against overloading Extension screw gives added height when necessary. Speedy and versatile, air/hydraulic bottle jack is far quicker than using conventional hand operated hydraulic equipment and much safer since air power permits one-handed operation and enables user to watch load more closely. Heavy duty design makes them ideal for a wide variety of automotive, truck, industrial and construction work. Specifications: Capacity: 20 Ton Minimum Height: 7""/178mm Maximum Height: 12.75""/323mm Air Pressure: 90-120psi Net Weight: 24.75lbs./11.20kg

$147.74
Click To Buy

Straight Punch/Flange Air Tool

(AP600ST8) Straight Punch/Flange Air ToolFeatures: 5/16"" punch Performs hole punching and panel crimping Features a rotating head for convenient use Precise control - every pull of the lever delivers a single punch or a single flange crimp Forms an offset crimped edge on sheet metals for no-bump lap welds Lightweight, yet ruggedly built Cuts metal fabrication time in half

$77.34
Click To Buy

Cordless Rechargeable LED Inspection Light

(AP6300) Cordless Rechargeable LED Inspection LightFeatures: Unit has 30 LEDs that provide bright, non-glare light which equals the same brightness as 550 Lumens. LED Lifetime rated up to 100,000 hours. Unit is shatterproof, shock and water resistant. Uses 4.8V-3300mAh-Ni-MH batteries-No Memory Effect-with an active life of approximately 6 hours. Full recharge time for batteries is approximately 3 hours. Low battery warning LED light on light panel. Ergonomically designed handle for comfort and durability. Light weight: 1.3lbs Swivel hanging hook included with unit. Battery charger uses standard input 110V AC power. Unit has a wall and/or desk mount recharging station.

$80.95
Click To Buy

120 LED Underhood Light

(AP6310) 120 LED Underhood LightFeatures: 120 LED lights provide bright, non-glare light. 25'' SJTOW 18/2 cord. Unit bar expands from 45"" to 63"" and easily attaches to hood. Attach and detach light from holder for portability. Shatterproof, shock resistant lens cover. 100-240V AC input On/Off switch Lightweight

$149.00
Click To Buy

Super Stand - Universal Rotating Parts Work Stand

(AP7300) Super Stand - Universal Rotating Parts Work StandFeatures: Handles any panel or bumper to make repairs and refinishing easy. Comes with 8 adjustable bars to fit almost any panel securely. Portability allows for fast and easy moving of the part from the prep. station to the spray booth. Allows for single handed rotation of panels 350 degrees in 16�?? increments.

$130.61
Click To Buy

Engine Cylinder Leak Down Test Kit

(AP7751) Engine Cylinder Leak Down Test KitFeatures: Kit allows easy identification of engine compression problems. Leak down gauge measures exact leakage amount and helps identify source of leak. Pressure gauge and regulator for easy setting of test pressure from your shop air source. Comes with dual gauge leak down tester, adapter hose, spark plug hole adapter.

$77.34
Click To Buy

Mercedes-Benz & BMW Fan Clutch Service Set

(AP78200) Mercedes-Benz & BMW Fan Clutch Service SetFeatures: Set allows servicing of different areas of repair that require a specialty tool due to their confined locations Mercedes-Benz Fan Clutch Wrench allows removal of lock nuts on thermo viscous radiator fans found on Mercedes-Benz and Ford vehicles. Works on M111, OM604, OM6056 and OM606 Mercedes-Benz engines from C & E classes with 36mm opening Mercedes-Benz Fan Clutch Holding Tool allows the technician to hold the water pump pulley in place while loosening the radiator fan to allow removal and replacement of the visco-coupling on the cooling fan Mercedes-Benz Fan Clutch Holding Wrench allows the water pump pulley to be held in place to permit the release of the fan BMW Fan Clutch Holding Wrench allows the water pump pulley to be held in place while the radiator fan is loosened. Holes at 38mm & 44.5mm permits work on BMW M10, M20, M30 and many other late model vehicles Mercedes-Benz Fan Clutch Wrench allows the removal and installation of the fan clutch assembly. The special slim shaft handle design permits easy work in tight areas. Works on Mercedes-Benz M103, M104, M119 and M120 with 65mm opening BMW Fan Clutch Holding Tool allows the removal and installation of the thermo-viscous fan on BMW and Ford with 32mm opening Universal Fan Belt Adjustment Wrench allows work on the radiator fans and pulley belts on Mercedes-Benz, Nissan Quest and Mercury Villager. Also permits work on A/C idler pulley tension lock nuts for A/C installation or adjustment. 2.5mm, 8mm and 10mm Allen keys are included.

$111.26
Click To Buy

6 Pc. A/C and Fuel Line Disconnect

(AP7836) 6 Pc. A/C and Fuel Line DisconnectFeatures: Includes: 5/16"", 3/8"", 1/2"", 5/8"", 3/4"", and 7/8"" sizes. Color coded, anodized aluminum. Comes in molded case.

$36.78
Click To Buy

8 Pc. Brake Tool Set

(AP7848) 8 Pc. Brake Tool SetFeatures: Set includes: Spring Compressor; Brake Spring Installer; Spring Removal Tool; Brake Retaining Spring Tool; Brake Spring Pliers; Two Brake Adjustment Spoons; Mini Brake Adjustment Spoon Comes in a blow molded case.

$37.11
Click To Buy

Universal Radiator Pressue Tester

(AP7858) Universal Radiator Pressue TesterFeatures: Designed to fit most major car brands, foreign and domestic. Includes pressure testing pump with gauge and hose, thermometer, 4 chromed steel cap adapters, and 8 anodized aluminum cap adapters. Also includes a quick-connect adapter to allow use with other cap adapters available on the market. Comes in a blow molded case.

$209.25
Click To Buy

Disc Brake Caliper Wind Back Tool Kit

(AP7860) Disc Brake Caliper Wind Back Tool KitFeatures: Rotates piston back into caliper for fitment of new brake shoes Works on many models from these manufacturers: Mercedes, BMW, VW, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Rover 4wd Kit consists of 11 seperate pieces

$40.27
Click To Buy

Full Coverage Disconnect Tool Set

(AP7861) Full Coverage Disconnect Tool SetFeatures: Tools included service many types of quick-disconnect fittings used on GM, Ford, and Chrysler vehicles Tools service heater hoses, transmission oil coolers, air conditioning and fuel lines Vehicle manufacturer approved and will not damage fittings being disconnected. Comes with blow molded case.

$38.70
Click To Buy

Axle Nut Socket Set - 7 Pc.

(AP7863) Axle Nut Socket Set - 7 Pc.Features: Heavy-duty cro-moly steel construction 1/2"" drive, extra long, 6 point design Kit includes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm axle nut sockets, and blow molded case.

$57.88
Click To Buy

7 Pc. Lugnut Service Set with Chrome Protecting Plastic Sleeves

(AP7870) 7 Pc. Lugnut Service Set with Chrome Protecting Plastic SleevesFeatures: Features internal and external protective sleves that prevent scratching of wheel and decorative lugnuts An absolutely necessary tool with todays high dollar wheels

$51.38
Click To Buy

Wheel Hubcap & Locknut Tool Kit

(AP7871) Wheel Hubcap & Locknut Tool KitFeatures: Removes and replaces most of the hubcap locks on GM, Ford, Chrysler and aftermarket wheel locks with out the factory original key Will not damage lock or studs

$45.09
Click To Buy

1/2" Dr. Wheel Bearing Locknut Socket Set - 7 Pc.

(AP7899) 1/2" Dr. Wheel Bearing Locknut Socket Set - 7 Pc.Features: 55mm hex - Toyota FJ, LN & RN models 2-3/8"" hex - 1984-92 Ford Ranger & Bronco II models with automatic locking hubs 2-1/2"" rounded hex designed for rear axles and various front axles on light duty trucks 2-3/4"" rounded hex designed for 3/4 & 1 Ton Ford F-250 & F-350 trucks with locking hubs 2-1/2"" rounded hex designed for 1990-93 Dodge trucks with Dana 60 front hubs 2-3/8"" rounded hex is designed for 1990-up Ford Ranger, Bronco II, and Explorer with automatic locking hubs. Comes in molded case.

$51.54
Click To Buy

Auto Darkening Variable Shade Welding Helmet

(AP8050) Auto Darkening Variable Shade Welding HelmetFeatures: One of the biggest improvements in ease and accuracy of electric welding Variable shade 7-13 lens Instant On darkens lens in a split second!

$77.08
Click To Buy

Deluxe Auto Darkening Welding Helmet - Solar/Battery Powered

(AP8070) Deluxe Auto Darkening Welding Helmet - Solar/Battery PoweredFeatures: Ready to use out of the box. Lens changes from clear to dark in 1/20,000 second. Variable shade adjustment - 9-13 DIN Operator adjustable delay from dark to clear state. Full face and front neck protection. 98mm x 38mm viewing lens area Utilizes performance solar cells as power supply and has 2 built-in 3v lithium batteries as power back-up. Under normal welding conditions, users can expect a battery life of more than 6 years. Meets ANSI standards Z87.1

$110.88
Click To Buy

Deluxe Welding Cart

(AP8201) Deluxe Welding CartFeatures: Heavy duty steel construction Heavy duty casters - 2 fixed & 2 swivel 3 shelves for easy access to supplies Cart size: 28"" (L) x 12"" (W) x 28"" (H)

$51.54
Click To Buy

Heavy-Duty Plastic Utitlity Cart with Locking Lid

(AP8334) Heavy-Duty Plastic Utitlity Cart with Locking LidFeatures: Hinged lid closes and locks with a standard pad lock (lock not included) For shop, office, warehouse or medical facility use Has two hand holes on each side Cart can be pushed or pulled from either side Trays are 3-1/2"" deep and can hold up to 300 lbs. 4"" heavy-duty swivel casters Tread will not mark floors Specifications: Size (W x L x H): 16"" x 30"" x 31"" Weight: 26 Lbs.

$100.61
Click To Buy

7pc. Hose Pliers Assortment

(AP9406) 7pc. Hose Pliers AssortmentFeatures: Kit SET INCLUDES: Hose Clamp Pliers (Astro Model # 9409) Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16"" - 2-1/2"" (18mm-54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked, freeing up your hands and making your job easier and faster Rubber dipped handle Pliers have a lifetime warranty Cable and spring are wearable items and must be replaced. US Patent # 6,370,985 B1; France Patent # 0012910 Swivel Jaw Hose Clamp Pliers (""+"" Slot) (Astro Model # 9406B) Swivel Jaw Hose Clamp Pliers (Astro Model # 9406C) Swivel jaws are slotted for positive holding of large or small clamps at any angle Ratchet action holds jaws closed in 5 different positions Fits all automotive and appliance spring wire hose clamps Allows fast and easy clamp removal Pliers latch in position to securely hold hose clamp when expanded Rubber dipped handle Angled Flat Band Hose Clamp Pliers (Astro Model # 9406D) Designed to remove and install flat band hose clamps in hard to reach areas Pliers feature angled jaws with 360�?? rotating tips to grip clamps at any angle Locking latch securely holds clamp in position Rubber dipped handle Hose Remover Pliers (Astro Model # 9406E) Designed to allow easy removal of 5/32"" to �?? vacuum and fuel hoses Rubber dipped handle Clic-R Collar Pliers (Astro Model # 9406F) For releasing and re-fitting reusable hose clips For type Clic and Clic-R Flat Band Hose Clamp Pliers (Astro Model # 9406G) Removes and Installs new style flat band hose clamps Jaws rotate 360�?? to grip at any angle Rubber dipped handle

$101.59
Click To Buy

Screw Extractor/Drill and Guide Set - 25 Pc.

(AP9447) Screw Extractor/Drill and Guide Set - 25 Pc.Features: Extracts screws and bolts Can be used on thread sizes 5mm to 16mm Remove broken fastener without breaking or jamming Permits highest torque applied to broken fastener without expansion - allowing a higher percentage of broken fastener to be turned out. Comes in blow molded case.

$42.25
Click To Buy

Siphon Feed Spray Gun

(APAS7SP) Siphon Feed Spray GunFeatures: ""Binks 7 Type"" Designed for high material delivery, will handle a range of viscosities from fine surface finishes to heavy body coatings Includes 1 quart dripless cup, instruction manual Specifications: Air inlet thread NPT: 1/4"" Air consumption: 4-12 CFM @ 50-60 PSI

$44.51
Click To Buy

Siphon Feed Spray Gun

(APAS8S) Siphon Feed Spray GunFeatures: All-purpose easy-to-clean paint spray gun Two-piece construction with gun featuring exclusive air valve design Fully adjustable wide fan pattern control 1 quart capacity dripless cup with 3/8"" attachment thread Specifications: Nozzle Size (mm): 1.7 Operation Pressure PSI: 50-60 Net Weight lb.: 3 Dimensions W x H in.: 6-1/2 x 12 Average Air Consumption CFM: 7-12 Air Inlet Thread NPT in.: 1/4 Required Compressor HP: 3 Maximum Pattern at 8"" Distance in.: 11

$57.41
Click To Buy

Tree Style Mobile Masking Station

(APASMS2) Tree Style Mobile Masking StationFeatures: Holds 4 paper rolls from 16""-22"" and 4 tape rolls. Nonskid rubber wheels make it possible to move masking station to job. Wide-base design prevens toppling as paper is dispensed. Lightweight steel frame is double welded for durability. Easy loading for paper rolls and tape. One hand operation.

$57.20
Click To Buy