The Store

The Repair 38 Auto/Boat/Plane Section

JR Body Clamp

(MO300) JR Body ClampFeatures: One of Mo-Clamp�?s original self-tightening clamps. A must for every bodyman. 1 1/2"" wide bite for aggressive pulling. Original wedge. New angled tooth design. Specifications: Gripping surface: 1 1/2"" wide (38 mm), 3/4"" deep (19 mm) Overall length: 9"" (229 mm) Weight: 5 lbs. (2.27 kg) Capacity: 5 tons (4,536 kg) Replacement Parts: #5350 Nut & Bolt - #9701 Wedge

$74.42
Click To Buy

DYNA-MO JR Body Clamp

(MO305) DYNA-MO JR Body ClampFeatures: New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring-loaded for easy opening. Specifications: Gripping surface: 1 1/4"" wide (32 mm), 1"" deep (25 mm) Overall length: 7"" (178 mm) Weight: 2 lbs. (.91 kg) Capacity: 3 ton (2,722kg) Replacement Parts: #5247 Nut, Bolt, Spring & Washer #9702 Wedge

$70.49
Click To Buy

Frame Rack Unibody Clamp

(MO4010) Frame Rack Unibody ClampFeatures: Bar holes designed for three ways of pulling, using Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening. Specifications: Gripping surface: 8"" wide (203 mm), 3/4"" deep (19 mm) Overall length: 14 1/2"" (368 mm) Weight: 19 lbs. (8.62 kg) Capacity: 5 tons (4,536 kg) Replacement Parts: #4045 Nut, Bolt & Washer - #4046 Spring

$170.64
Click To Buy

Multi-Angle Body Clamp

(MO4050) Multi-Angle Body ClampFeatures: The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has raised ""ears"" to hold bolts stationary, for easy tightening. Specifications: Gripping surface: 3 3/4"" wide (95 mm), 3/4"" deep (19 mm) Overall length: 7"" (178 mm) Weight: 8 lbs. (3.63 kg) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer - #200130 Pull Plate - #200131 Side Pull Bracket

$107.75
Click To Buy

Double Grab Hook Assembly

(MO4145) Double Grab Hook AssemblyFeatures: For easy 3/8"" chain connection. Another time saving tool. Specifications: Overall length: 8 3/4"" (222 mm) Weight: 3 lbs. (1.36 kg) Capacity: 10 tons (9,072 kg)

$34.98
Click To Buy

TWIN CLAW Body Clamp

(MO440) TWIN CLAW Body ClampFeatures: The ""Twin Claw"" TM self-tightening clamp is a 7 ton rated tool for very tough pulls. Made of MoClamp Tru-Tuff, heat-treated steel alloy. The jaws and dropped forged pulling wedge distribute the clamping load - reducing the possibility of metal tearing. Specifications: Overall length: 8"" (203 mm) Weight: 8 lbs. (3.63 kg) Height: 3"" (76 mm) Capacity: 7 tons (6,356 kg) Replacement Parts: 010701 Small wedge, 5255 Nut, bolt & washer

$91.11
Click To Buy

T.O. (Tight Opening) Body Clamp

(MO550) T.O. (Tight Opening) Body ClampFeatures: For hard-to-pull areas such as frame rail ends, core supports, box sides, cowls. Original straight cut tooth design. Specifications: Gripping surface: 1 1/2"" wide (38 mm), 1/2"" deep (13 mm) Overall length: 8 1/2"" (216 mm) Weight: 5 lbs. (2.27 kg) Capacity: 3 tons (2,722 kg) Replacement Parts: #5250 Bolt, Spring & Washer

$113.03
Click To Buy

Door Post Puller/Twister

(MO5616) Door Post Puller/TwisterFeatures: Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars. Specifications: Overall length: 5 1/4"" (133 mm) Slots: 1/2"" x 1 1/2"" (12 mm x 39 mm) Weight: 2 lbs. (.91 kg) Capacity: 2 tons (1,814 kg)

$38.87
Click To Buy

G Body Clamp

(MO5800) G Body ClampFeatures: Mo-Clamp�?s G Clamp means easier pulling, with multiple pulling angles.The G Clamp has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel, cast for extra strength. Includes swivel pad. Specifications: Overall length: 10 1/2"" wide (267 mm) Overall width: 6"" (152 mm) Weight: 6 lbs. (2.72 kg) Capacity: 5 tons (4,536 kg) Replacement Parts: #4055 Screw Pin Shackle - #520034 Main Shaft - #840065 Swivel Pad

$105.15
Click To Buy

3/8" x 8'' Frame Straightening Chain with Grab Hook

(MO6009) 3/8" x 8'' Frame Straightening Chain with Grab Hook Features: 3/8"" chain Includes on MO 6210 Grab Hook Proof test 20,000 lbs. (9,070 kg); the weight of the chain is 2 lbs. per foot (.91 kg), the weight of the Grab Hook is 1 lb (.45 kg)

$73.68
Click To Buy

TAC-N-PULL with Pull Plates

(MO800) TAC-N-PULL with Pull PlatesFeatures: For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3"" plates, two 1 1/2"" plates, and two 1"" plates. Replacement plates available in the MO 805 plate kit. Specifications: Gripping surface: up to 3"" wide (76 mm) Overall length: 5 1/2"" (140 mm) Weight: 3 lbs. (1.36 kg) Capacity: 3 tons (2,722 kg)

$73.21
Click To Buy

Pull Plate Kit

(MO805) Pull Plate KitFeatures: Includes Ten 1"" Plates, Five each 1-1/2"" & 3"" Plates

$45.41
Click To Buy

Large 2 Shelf Gladiator Service Utility Stock Cart with 5" Casters

(MRNCA1900) Large 2 Shelf Gladiator Service Utility Stock Cart with 5" CastersFeatures: Ideal for use in a warehouse, the garage - any place a rugged cart is needed. This rugged service cart features easy-to-clean structural plastic for industrial, medical and food service use. Features a 3"" deep, leak-proof top tray plus a 3"" deep bottom shelf. Excellent mobility with 4 casters (2 swivel and 2 fixed) and a comfortable push handle. Easy assembly. Rounded edges and corners will not cut or scrape walls or furniture. Lightweight design allows this cart to be easily maneuvered on 5"" nonmarking casters. Useable Shelf Area Dimensions: 36""L x 24""W x 4"" deep tray - Larger Shelf Area than Competitive Carts! Priced less than the Rubbermaid 4500-88Gray but with much larger useable area. Specifications: Overall Dimensions: 40.5L x 25.5W x 32""H Casters: 5"" x 1 1/4"" non marking Colour: Gray is standard colour. Other colours also available.

$154.72
Click To Buy

Optional 3rd Shelf for Stock Cart

(MRNCA1902) Optional 3rd Shelf for Stock CartFeatures: An optional 4"" deep middle tray shelf is available and can be added to make a three shelf cart. Cart capacity is 500 pounds with a 250 pound maximum capacity on each shelf. Installs easily. 37 1/4"" x 25 1/2"" x 4 1/4"" (2.3 cubic feet) Use with CA1900 Large 2 Shelf Cart

$67.73
Click To Buy

Swing Lid For 32 Gallon Garbage Can

(MRNGB3232L-SW) Swing Lid For 32 Gallon Garbage CanFeatures: Fits 32 gallon containers.

$52.45
Click To Buy

Twist on Dolly for use with 20, 32, and 44 Gallon Gladiator Containers

(MRNGB4000D) Twist on Dolly for use with 20, 32, and 44 Gallon Gladiator ContainersFeatures: Locks into base and provides additional support for heavier loads. For use with 20 gal., 32 gal., and 44 gal cans.

$35.37
Click To Buy

44 Gallon Garbage Container

(MRNGB4444) 44 Gallon Garbage ContainerFeatures: 31 1/2"" H x 24"" diameter Casters sold separately

$32.66
Click To Buy

26-32 Quart Bucket & Sidepress Wringer Combo

(MRNMA1133) 26-32 Quart Bucket & Sidepress Wringer ComboFeatures: Marino Sidepress bucket and wringer combos are designed to meet the demanding requirements of the most sanitary environment at a fraction of stainless steel cost. The durable stain resistant one piece construction is easy to clean and sanitize and does not provide a breeding groung for bacteria. Eliminate the need to stock various sized wringers. The Marino sidepress wringer is designed to effectively wring all wet mops from 12 oz to 32 oz. Yellow

$56.42
Click To Buy

26-32 Quart Downpress Bucket and 1232 Wringer "Combo"

(MRNMA2633) 26-32 Quart Downpress Bucket and 1232 Wringer "Combo"Features: Marino buckets are designed to meet the demanding requirements of the most sanitary environments at a fraction of stainless steel cost. All Marino buckets are manufactured from high density polymer that is injection molded. Unlike conventional foam plastic buckets, our buckets are absolutley smooth. The durable stain resistant one piece construction is easy to clean and sanitize and does not provide a breeding ground for bacteria. Our buckets feature single bail handle which eliminate the possibility of pinching and 3"" nonmarking ball bearing casters that provide smooth easy movement, guaranteed not to fall out.

$70.73
Click To Buy

Trim Jim 23 Gallon Waste/Garbage Container

(MRNSP2330) Trim Jim 23 Gallon Waste/Garbage ContainerFeatures: Use 23 gallon plastic liners/bags. Container only.

$35.37
Click To Buy

Heavy Duty 3 Ton Jack Stand (Pair)

(MRQW93503) Heavy Duty 3 Ton Jack Stand (Pair)Features: Saddle column provides ratchet action height adjustment. Dual purpose handle serves as carry handle and saddle column release. Multi position ratchet bar provides strength and durability. Formed base adds stability and helps reduce sinkage into pavement. 3 ton capacity. 11-1/2"" min. height. 17"" max. height. 11/16"" height intervals. 7-5/8"" x 8-3/4"" base size. 1-3/16"" x 4-1/4"" saddle size. 19 G.W. (lbs.)

$96.75
Click To Buy

Heavy-Duty 3 Ton Jack Stand

(MRQW93779) Heavy-Duty 3 Ton Jack StandFeatures: Saddle column provides ratchet action height adjustment. Dual purpose handle serves as carry handle and saddle column release. Multi position ratchet bar provides strength and durability. Formed base adds stability and helps reduce sinkage into pavement. 3 Ton capacity 11-1/2"" min height 17"" max height 11/16"" height intervals 7-5/8"" x 8-3/4"" base size 1-3/16"" x 4-1/4"" saddle size 19 G.W.(lbs.)

$96.75
Click To Buy

ProSeal Heat Shrink Wire Terminal Assortment - 115 Pc.

(MST10600) ProSeal Heat Shrink Wire Terminal Assortment - 115 Pc.Features: Kit contains 20 items, 115 assorted connectors packed in a plastic storage case. ProSeal connectors are ""Crimp-and-Heat-Seal"" style for strong and water resistant connections. Easy-to-use. Color-coded. Kit Contents: RING TERMINALS (5) 18-20 AWG, Ring Terminal, #6 Stud, Red (5) 18-20 AWG, Ring Terminal, #10 Stud, Red (5) 14-16 AWG, Ring Terminal, #8 Stud, Blue (5) 14-16 AWG, Ring Terminal, #10 Stud, Blue (5) 14-16 AWG, Ring Terminal, 1/4"" Stud, Blue (5) 14-16 AWG, Ring Terminal, 3/8"" Stud, Blue (5) 10-12 AWG, Ring Terminal, #8 Stud, Yellow (5) 10-12 AWG, Ring Terminal, #10 Stud, Yellow (5) 10-12 AWG, Ring Terminal, 1/4"" Stud, Yellow (5) 10-12 AWG, Ring Terminal, 3/8"" Stud, Yellow SPADE TERMINALS (5) 18-20 AWG, Spade Terminal, #10, Red (5) 14-16 AWG, Spade Terminal, #10, Blue (5) 10-12 AWG, Spade Terminal, #10, Yellow BUTT CONNECTORS (10) 18-20 AWG, Butt Connector, Red (10) 14-16 AWG, Butt Connector, Blue (10) 10-12 AWG, Butt Connector, Yellow INSULATED COUPLERS (5) 18-20 AWG, Female Coupler, 1/4"" Tab, Red (5) 14-16 AWG, Female Coupler, 1/4"" Tab, Blue (5) 18-20 AWG, Male Coupler, 1/4"" Tab, Red (5) 14-16 AWG, Male Coupler, 1/4"" Tab, Blue

$50.81
Click To Buy

PortaProButane Hot Glue Gun Kit - Cordless

(MSTGG100K) PortaProButane Hot Glue Gun Kit - CordlessFeatures: Completely portable, lets you work almost anywhere Power and durability to get the job done in industrial applications Runs continuously for up to 140 minutes on butane gas, easily refilled in 20 seconds Fast, easy start up with push button piezo ignition Operates up to 392�?? F. Reaches working temperature in just 3 to 4 minutes Fast, even adhesive flow with standard 1/2"" (12 mm) diameter glue sticks 200 Watt heater delivers up to 1.9 lbs. of glue per hour Ergonomically designed for ease of use Safety lock on fuel flow control wheel prevents unintentional gas flow Instant glue flow cut-off reduces dripping 4 interchangeable tips styles are included for different applications. Built-in folding stand and fuel level window Fuel not included - Master Ultrathane Butane is recommended (Master Appliance 51773). Kit includes: Glue gun, general purpose tip, pinpoint extension tip, diagonal cut extension tip, spreader extension tip, (8) 6"" long general purpose glue sticks, instruction manual, and rugged storage case.

$48.07
Click To Buy

Master Heat Gun

(MSTHG501A) Master Heat GunFeatures: Professional, heavy-duty, industrial quality, multiple use heat gun. High temperature and power rating 500 degrees - 750 degrees fahrenheit at 1,680 Watts. 120 VAC, 14 Amp. 23 CFM airflow gets job done fast. Powerful high speed universal motor. Sturdy die cast housing. Adjustable non-slip stand. UL listed & CSA aproved. Cordset: 6ft., 3 wire grounded. Made in USA. Net Weight: 3.7lbs.

$83.84
Click To Buy

Master Ultratorch, Self-Igniting Butane Torch Kit

(MSTUT100SI) Master Ultratorch, Self-Igniting Butane Torch KitFeatures: Ignites with the push of a button. Cordless and completely portable. Ready to use in 30 seconds. Sturdy metal tank holds enough gas for 3 hours of operation. Temperatures up to 1202 degrees fahrenheit/650 degrees celsius. Dual function soldering iron and heat tool. Comes with soldering tip, heat tip, spanner wrench, open end wrench, shrink atttachment and protective cap. Optional accessories available and interchangeable between UT-100 and UT-100SI. Refillable with Master Ultratane Butane No. MST 51773. UL Listed.

$87.71
Click To Buy