The Store

The Repair 49 Auto/Boat/Plane Section

RRR Machine Maintenance Kit for 12134A, 17700A, 34700, 34300-2K

(ROB13169) RRR Machine Maintenance Kit for 12134A, 17700A, 34700, 34300-2KFeatures: Keep recovery and recycling units operating at peak efficiency with a convenient maintenance kit. Contains one quick change filter-drier to be used on both R-12 and R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil. For early models using 34430 Filter-Drier (12134A, 17700A, 34700, 34300-2K). See your instruction manual if you have questions about which filter-drier to use.

$51.60
Click To Buy

Premium High Vacuum Pump Oil - 4 Gallons

(ROB13204) Premium High Vacuum Pump Oil - 4 GallonsFeatures: Robinair�?s oil is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair oil is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair oil has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil�?s purity, thinning it and reducing the pump�?s ability to reach a deep vacuum. Sold as a case of four 1 gallon bottles.

$61.96
Click To Buy

VacuMaster 1.5 CFM Vacuum Pump - 2 Stage

(ROB15150) VacuMaster 1.5 CFM Vacuum Pump - 2 StageFeatures: 115 volt, 2-stage design. 1/2"" ACME and 1/4"" MFL intake fitting. ""No-hassle"" over-the-counter replacement warranty.

$219.29
Click To Buy

1.2 CFM 2-Stage Vacuum Pump, R-12/R-134a

(ROB15234) 1.2 CFM 2-Stage Vacuum Pump, R-12/R-134aFeatures: Specifications: Free air displacement: 1.2 CFM Number of stages: Two Factory micron rating: 50 microns Intake fitting: 1/4"" MFL and 1/2"" ACME Oil capacity: 5 oz. (148 ml) Motor size: 1/8 HP Voltage: 110-115V 50-60 Hz Weight: 10 lbs.

$264.39
Click To Buy

VacuMaster 3CFM Vacuum Pump - 2 Stage

(ROB15300) VacuMaster 3CFM Vacuum Pump - 2 StageFeatures: 115 volt, 2-stage design. 1/2"" ACME and 1/4"" MFL intake fitting. ""No-hassle"" over-the-counter replacement warranty.

$245.09
Click To Buy

4 CFM 2-Stage Vacuum Pump, R-12/R-134a

(ROB15434) 4 CFM 2-Stage Vacuum Pump, R-12/R-134aFeatures: Specifications: Free air displacement: 4 CFM Number of stages: Two Factory micron rating: 20 microns Intake fitting: 1/4"" MFL and 1/2"" ACME Oil capacity: 15 oz. (148 ml) Motor size: 1/3 HP Voltage: 115V 60 Hz Weight: 27 lbs.

$283.74
Click To Buy

VacuMaster 5 CFM Vacuum Pump - 2 Stage

(ROB15500) VacuMaster 5 CFM Vacuum Pump - 2 StageFeatures: 115 volt, 2-stage design. 1/2"" ACME and 1/4"" MFL intake fitting. ""No-hassle"" over-the-counter replacement warranty.

$277.29
Click To Buy

6 CFM 2-Stage Vacuum Pump, R-12/R-134a

(ROB15600) 6 CFM 2-Stage Vacuum Pump, R-12/R-134aFeatures: Specifications: Free air displacement: 6 CFM Number of stages: Two Factory micron rating: 20 microns Intake fitting: 1/4"" MFL and 1/2"" MFL Oil capacity: 15 oz. (148 ml) Motor size: 1/2 HP Voltage: 115V 60 Hz Weight: 27 lbs.

$309.54
Click To Buy

Flexible True UV LED Leak Detection Light

(ROB16291) Flexible True UV LED Leak Detection LightFeatures: Three LEDs affixed to a flexible tube make hard-to-reach spots readily accessible. Includes battery (3 N-size) and UV enhancing glasses.

$42.25
Click To Buy

12-LED UV Leak Detection Lamp - Cordless/Rechargeable

(ROB16345) 12-LED UV Leak Detection Lamp - Cordless/RechargeableFeatures: Twelve LEDs produce hi-intensity true UV light. Inlcudes battery charger and UV enhancing glasses.

$109.64
Click To Buy

Complete R134a and R12 UV Detection Kit

(ROB16350) Complete R134a and R12 UV Detection KitFeatures: The complete UV detection kit - Find auto leaks quickly, without mess, measuring, or calculations. Powerful 50-watt/12-volt LED UV lamp with cord and battery clips. Injection gun with R-134a hose and R-12 adapter. Four universal A/C dye twist-on cartridges. Enough dye for 20 applications. UV enhancing glasses with dye cleaner. Service stickers.

$150.90
Click To Buy

A/C UV Dye Injection System

(ROB16355) A/C UV Dye Injection SystemFeatures: This dye injection kit is for those who already have a UV lamp, yet want to have the best kit in UV detection. Kit includes: Injection gun with R-134a hose and R-12 adapter. Four universal A/C dye twist-on cartridges. Enough for 20 applications. Service stickers.

$87.35
Click To Buy

Universal A/C Dye - Four Replacement Cartridges

(ROB16356) Universal A/C Dye - Four Replacement CartridgesFeatures: Pinpoint leaks in A/C systems. Four twist-on cartridges, 1oz. (30 ml) each. Enough dye for 20 applications. OEM-approved and SAE-certified dye. Service stickers included.

$36.11
Click To Buy

Electronic Refrigerant Leak Detector

(ROB16600) Electronic Refrigerant Leak DetectorFeatures: For all CFC, HCFC and HFC Refrigerants One-Hand Operation -- The 16"" gooseneck probe holds its position so you can operate the detector with one hand. Audible and Visual Leak Indicators Threshold Balancing Control -- Gives you infinite control for eliminating background contamination so you can zero in on the leak site Volume Control Dependable Leak Detecting; The 16600 uses proven corona discharge technology to sense leaks. It works by creating a high voltage corona in the sensing tip. When this field is interrupted by refrigerant, the alarm is triggered. All corona discharge leak detectors are not the same, however -- the quality of key components is critical in providing an effective instrument. Sensing Tip; The materials, shape and finish of the sensor and surrounding shell are critical to the effectiveness and life ot the tip. The 16600 is built with a mirror finish and specially engineered tip for superior sensitivity and durability. The tip can be cleaned for even longer life. Specifications: Power Source: Four AA alkaline batteries (included) Battery Life: Approximately 25 hours Dimensions: 8-1/2"" L x 3-1/4"" W x 2"" D (21.59 cm x 8.26 cm x 5 cm) Probe Length: 16 in. (40.6 cm) Weight: 1.14 lbs (.52 kg) with batteries

$132.86
Click To Buy

Cool-Tech ID Refrigerant Identifier

(ROB16900) Cool-Tech ID Refrigerant IdentifierFeatures: Signals ""Go"" only if refrigerant is 98% pure. ""Go"" and ""No Go"" lights clearly show if refrigerant is pure enough to be recovered or charged. Dual power source gives you service flexibility. Hydrocarbon alarm protects the user by signalling if potentially dangerous butane, propane, etc., is present in the refrigerant. Displays percent of air in the A/C system or tank. For R-12 and R-134A Fast and Accurate - Displays test results in less than a minute and passes the refrigerant only if it''s 98% pure. To assure consistent, rapid results, the units are not pressure/temperature dependent. Reliable Technology - The instruments use dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used. Unique Case Design - Puts all the components up front where you can see them at a glance, including the filter. Contoured case can be held in either hand and rubber feet protect the vehicle''s finish. Specifications: Power Source: 12V DC or 115V 60 Hz AC (adapter included) Dimensions: 11""L x 9""W x 4-1/2""D (27.94cm x 22.86 cm x 11.43cm) Weight: 1.75lbs (740g)

$1030.71
Click To Buy

Cool-Tech ID Plus Refrigerant Identifier

(ROB16910) Cool-Tech ID Plus Refrigerant IdentifierFeatures: Identifies refrigerant type and purges damaging air. In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system. Displays the actual percentage of R-12, R-134a, R-22 and air in the system or tank. Gives you the option of purging air if a significant concentration is found. Hydrocarbon alarm sounds if flammable substances are sensed. On-board printer port allows you to connect a printer for hard copy of testing results. Gauge on panel shows system pressure. Fast and Accurate - Displays test results in less than a minute and passes the refrigerant only if it''s 98% pure. To assure consistent, rapid results, the units are not pressure/temperature dependent. Reliable Technology - The instruments use dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used. Unique Case Design - Puts all the components up front where you can see them at a glance, including the filter. Contoured case can be held in either hand and rubber feet protect the vehicle''s finish. Specifications Power Source: 115V 60 Hz AC Dimensions: 11""L x 9""W x 4-1/2""D (27.94cm x 22.86cm x 11.43 cm) Weight: 1.75lbs. (740 g)

$1546.71
Click To Buy

Vinyl Dust Cover for 34900/34800-2K/17800B

(ROB17490) Vinyl Dust Cover for 34900/34800-2K/17800BFeatures: Protect your investment with a heavy-duty vinyl dust cover. Features corded seams for durability; medium gray color with Cool-Tech logo. Fits 34900, 34800-2K, and 17800B Series.

$71.40
Click To Buy

Robinair Machine Vinyl Dust Cover

(ROB17492) Robinair Machine Vinyl Dust CoverFeatures: Protect your investment with a heavy duty vinyl dust cover. Features corded seams for durability; medium gray color with Cool-Tech logo. Fits 342000, 17700-2K, 34700-2K Weries

$65.82
Click To Buy

Robinair Machine Vinyl Dust Cover

(ROB17495) Robinair Machine Vinyl Dust CoverFeatures: Protect your investment with a heavy duty vinyl dust cover. Features corded seams for durability; medium gray color with Cool-Tech logo. Fits all 17700A, 34700, 34234, 34234-2K, 34134A, 34134-2K Series

$43.86
Click To Buy

50lb. Refrigerant Tank

(ROB17506) 50lb. Refrigerant TankFeatures: 50lb. tank has 1/4"" fittings for use with Robinair 17800A, 17800-2K, 17700A, 25150, 25175, 25200B Series

$157.32
Click To Buy

A/C Flush Gun Kit

(ROB17595) A/C Flush Gun KitFeatures: An economical means of flushing contaminants and scale from A/C system components, the flush gun uses dry shop air to pressurize the solvent. Thoroughly cleans the part, removing oil and any refrigerant contaminants and residue. Attached nozzle directs the flow of solvent without spray-back.

$43.09
Click To Buy

R12 Recovery, Recycling & Recharging Machine

(ROB17700Z) R12 Recovery, Recycling & Recharging MachineFeatures: Combines simple operation with superior accuracy. Fully automatic function lets you recover, recycle, evacuate, leak test, recharge R12, and then walk away. Best of all, it''s easy to use! Ergonomic Design - The cabinet is easy to maneuver between service bays and position near the vehicle. Large Gauges - The high and low side gauges are mounted at an angle that''s easy to see, and they''re a full 4"" in diamete. Features that speed service: -6 CFM vacuum pump for fast, thorough pull-down. -Heavy-duty compressor pulls from both high and low sides during recovery. -Single pass recycling meets SAE specs. -Oil injector lets you add system oil in seconds. Specifications: -Voltage - 115V 60 Hz -Refrigerant Container - On-board 30 lb. (14 kg) vessel (source tank not included) -Operating Range - 50�?? to 120�??F (11�?? to 49�??C) -Recycling Filter-Drier - 43 cu. in spin-on type -Pump Free Air Displacement - cfm (142 L/min) -Dimensions - 50""H x 34""W x 23""D (127 cm x 86.4 cm x 58.4 cm) -Shipping Weight - 235 lbs. (106.6 kg)

$3611.99
Click To Buy

CoolTech Multi - Recovery, Recycling, Evacuation and Recharging Unit for Multilple Refrigerants

(ROB17800B) CoolTech Multi - Recovery, Recycling, Evacuation and Recharging Unit for Multilple RefrigerantsFeatures: The 17800B recovers, recycles, evacuates and recharges -- all in one fast, continuous operation through one hook-up. It''s ideal for refrigerated trailers, buses, RV''s, and other vehicles that use more than one refrigerant. The Cool-Tech Multi is also great for fleet maintenance, covering, a variety of makes and models since it has R-12 and R-134a capabilities. In-plant maintenance departments will find it can handle the different types of refrigerants used in various systems. Recovers, Recycles, Evacuates and Recharges R-12, R-134a R-22, R-502 M and HP Blends - and many more! Proven Technology simplifies service! Microprocessor: Controls functions; prompts lead you through programming and also signal when it''s time to change the filter-drier, vacuum pump oil and compressor oil. Float Chamber: Automatically adjusts from liquid to vapor for most efficient recovery. Electronic Scale: Makes it simple to recharge to factory specifications; also weighs recovered refrigerant and provides tank overfill protection. Cool-Tech Vacuum Pump: 6 CFM has the capacity to thoroughly evacuate system, readying it for recharging. Versatility for many types of systems! Lockout Panel: Prevents mixing of refrigerants; slides to one side for 1/4"" fitings and to the other for 1/2"" Acme fittings. Single Pass Recycling: Makes an initial pass through the filter-drier; additional recycling can be programmed in case of compressor burn-out, other conditions. Heavy Duty Filter-Drier: Removes moisture and acid from the refrigerant; can handle up to 300 pounds between changeovers. Comes with two 50 pound tanks, one with 1/4"" fittings and the other with 1/2"" Acme fitings. Also three sets of charging hoses are included - one for R-12, one for automotive R-134a (with field service couplers), and one for other refrigerants using 1/4"" SAE fittings. Specifications: Voltage: 115V 60 Hz Tanks: Two 50 lb (23 kg) refillable Operating Range: 50 degree to 105 degree fahrenheit (11 degree to 41 degree celsius) Recovery Rate: Vapor - 1/2 lb/min. (.02 kg/min); Liquid - 4 lbs./min. (1.8kg/min) Recycling Rate: 4 lbs/min.(1.8 kg/min.)flow rate Recycling Filter-Drier: 1150 g XH-9 Pump Free Air Displacement: 6 cfm (142 L/m) at 50 Hz Dimensions: 47"" H x 26"" W x 30"" D (119 cm x 66 cm x 77 cm) Weight: 256lbs (116 kg) without tank

$5740.50
Click To Buy

R12 Refrigerant Oil Injector with 1/4" Fractional Fitting

(ROB18065) R12 Refrigerant Oil Injector with 1/4" Fractional FittingFeatures: It takes just seconds to transfer an oil charge while the system is in a vacuum. The injectors are great add-ons to recovery/recyclling and charging. Installs in-line on the low side of the manifold. Made of durable polypropylene with oil levels marked in ounces and milliliters. Solid brass fitting with a Lexan handwheel.

$47.06
Click To Buy

3 Pc. A/C Hose Ball Valve Adapter Set

(ROB18514) 3 Pc. A/C Hose Ball Valve Adapter SetFeatures: These six inch adapters connect to any 1/4"" charging hose for convenient in-line control of refrigerant flow. The ball valve opens and closes in a quarter turn. The fitting features a 45 degreee bend for easier connections, even in tight spots. Includes: Red, Yellow and Blue 1/4"" MFL x 1/4"" FFL adapters

$51.05
Click To Buy

Access Valve Core Remover/Installer

(ROB18561) Access Valve Core Remover/InstallerFeatures: Removes valve core without losing the system charge. For standard valve core.

$37.47
Click To Buy