The Store

The Repair 69 Auto/Boat/Plane Section

Digital Rotor Gage - 0-5.50"

(STO3M430) Digital Rotor Gage - 0-5.50"Features: Range: 0-5.50""/0-140mm Graduations: .0005""/.01mm Easy to read digital display with direct inch/metric conversion Measure brake rotors and ball joints Pointed anvil and 3.50"" long arms to inspect rotors before turning or replacing

$64.69
Click To Buy

Electronic Brake Fluid Tester

(STO3S121) Electronic Brake Fluid TesterFeatures: Easily check moisture content in any brake fluid sample Tri-Colored LED panel for easy recognition -Green LED = Moisture less than 1.5% (OK) -Yellow LED = Moisture between 1.5% and 3.0% (Consider flushing) -Red LED = Moisture greater than 3.0% (Fluid should be flushed immediately) Small size and easy to use Economical compared to single use strips

$61.40
Click To Buy

1/2" Dr. Micrometer Click-Type Torque Wrench

(STO3T425) 1/2" Dr. Micrometer Click-Type Torque WrenchFeatures: Accuracy �?? 4% in clockwise direction Furnished in a fitted case Thumb screw at base of handle for locking torque setting Range: 25ft.lb.-250ft.lb 1ft.lb. graduations Square drive: 1/2""

$48.50
Click To Buy

3/4" Dr. Micrometer Click-Type Torque Wrench

(STO3T660) 3/4" Dr. Micrometer Click-Type Torque WrenchFeatures: Accuracy �?? 4% in clockwise direction Furnished in a fitted case Thumb screw at base of handle for locking torque setting Range: 100ft.lb.-600ft.lb 5 ft.lb. graduations Square drive: 3/4""

$261.29
Click To Buy

Fuel Injection Tester Adapter Update Kit

(STR74489) Fuel Injection Tester Adapter Update KitFeatures: Use with any Star F.I. pressure test kit with a quick coupler Includes right angle adapters for Ford and GM. Good for those hard to reach places. Includes adapter to allow checking Deadhead Pressure on 1/4"", 5/16"", and 3/8"" hose. Also Quick Connects for Chrysler and GM vehicles with metal and plastic disconnects. A must have for cars without a Schrader valve. Made in the USA

$56.82
Click To Buy

Cylinder Leak-Down Tester

(STRCLT2PB) Cylinder Leak-Down TesterFeatures: Check cylinder leakage to find out the health of the engine and pinpoint the leakage source if required. Dual gauge tester allows monitoring of both the input air line pressure plus the engines ability to hold compressed air. Included hose fits 14mm and 18mm spark plug holes. Comes in molded storage case. (Note: Motor must be at TDC and be safely locked to avoid turning-over under pressure)

$75.98
Click To Buy

Fuel Injection Pressure Tester

(STRTU113P) Fuel Injection Pressure TesterFeatures: This tester determines if the fuel pressure regulator needs adjusting or replacing. It will allow the mechanic to adjust it to the correct pressure if its is adjustable. It will also tell if other components are bad, such as fuel pump, filter, etc. Has everything to test the following systems: American Motors; Bosch AFC, MPC Euro & Japanese (except C.I.S.); Chrysler Corp.; Ford Motor Co.; GM (except T.B.I); Japanese fuel injection systems. Also works with others using Bendix-type fuel injection or Schrader-type valve, including the small Scrader valve found on both T.B.I. and Multi-Port Fuel Injection systems found on Ford products. Dual scale 2-1/2"" gauge, 100 PSI and 7 kg/cm2 Comes in heavy vinyl pouch with instructions and specifications

$33.94
Click To Buy

Master Engine Compression Test Kit

(STRTU30) Master Engine Compression Test KitFeatures: Test engine compression on all domestic & import cars and light trucks with gasoline engines. 0-300 psi, 2-1/2"" diameter, gauge with protective boot 0-200 psi, 1-1/4"" diameter, gauge for small engines Kit also includes: M14 (short thread) hose, M14 (long thread) hose, M18 hose, M18 long reach adapter, M12 adapter, M10 adapter, quick couplers and repair parts kit (extra o-rings and pressure relief valves). Kit comes in a molded case. Made in the USA

$99.76
Click To Buy

Master Fuel Injection Pressure Test Set

(STRTU443) Master Fuel Injection Pressure Test SetFeatures: This set is a must have for the professional technician! The uniquely designed 3-1/2"" gauge has a special expanded 1lb. increment dual dial for accurate reading, with a 100 PSI/700 kPA scale. It also has a relief valve and 6 ft. of tubing to relieve the pressre and fuel safely. Also allows checking for sufficient fuel flow. Gauge has hook, allowing technician to have both hands free The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide! A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters. Set comes in a specially designed molded case to make storage easy and organized.

$300.88
Click To Buy

Deluxe Global Fuel Injection Pressure Test Kit

(STRTU443U) Deluxe Global Fuel Injection Pressure Test KitFeatures: Comprehensive kit Tests ALL Fuel Injection Systems including: American Motors; Bosch AFC & CIS; GM; GM TBI; Chrysler; Japanese Fuel Injection; MPC European & Japanese Systems; Bendix Type/Schrader valve fuel injection including the small Scrader valve found on Ford products. Uniquely designed 3-1/2"" gauge with expanded 1 lb. increment dual dial for accurate, easy reading. 100 psi/700 kPa scale Pressure relief valve Made in the USA

$348.96
Click To Buy

1/4" Drive Universal Metric 6 Point Impact Socket Set - 12 Pc.

(SUN1814) 1/4" Drive Universal Metric 6 Point Impact Socket Set - 12 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. 1/4"" drive, universal type 6 point impact sockets Includes: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15mm in a molded storage tray

$92.87
Click To Buy

1/4" Drive Master Impact Sockets Set Fractional and Metric

(SUN1874) 1/4" Drive Master Impact Sockets Set Fractional and MetricFeatures: This set combines all 1/4"" drive impact socket sizes, both standard and deep, with three new additions: a 15mm standard, 14mm and 15mm deep, all 1/4"" drive accessories, and our new 1/4"" drive Internal Star Socket�?s all in one sturdy blow-molded case. Set contains: 10 pc. Fractional Standard: 3/16"", 7/32"", 1/4"", 9/32"", 5/16"", 11/32"", 3/8"", 7/16"", 1/2"", and 9/16"" 10 pc. Fractional Deep: 3/16"", 7/32"", 1/4"", 9/32"", 5/16"", 11/32"", 3/8"", 7/16"", 1/2"", and 9/16"" 14 pc. Metric Standard: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15mm 11 pc. Metric Deep: 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15mm 6 pc. Fractional Universal: 1/4"", 5/16"", 3/8"", 7/16"", 1/2"", and 9/16"" 12 pc. Metric Universal: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, and 15mm 6 pc. Internal Star Sockets: T10, T15, T20, T25, T27, and T30 1/4"" Drive Universal Impact Joint 1/4"" Drive 1/4"" Female x 3/8"" Male adapter 1/4"" Drive Extension 2"" 1/4"" Drive Extension 4"" 1/4"" Drive Extension 6""

$207.06
Click To Buy

1/2" Dr. Impact Extension Set - 4 Pc.

(SUN2500) 1/2" Dr. Impact Extension Set - 4 Pc.Features: Includes: 3"", 5"", 10"", and 15"" impact extensions. Male end of extension has a steel ball retainer.

$42.31
Click To Buy

1/2" Drive Fractional 6 Point Deep Impact Socket Set - 13 Pc.

(SUN2651) 1/2" Drive Fractional 6 Point Deep Impact Socket Set - 13 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these deep length impact sockets: 7/16"", 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1-1/8"", and 1-1/4""

$50.30
Click To Buy

1/2" Drive Metric 6 Point Deep Impact Socket Set - 14 Pc.

(SUN2653) 1/2" Drive Metric 6 Point Deep Impact Socket Set - 14 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these deep length impact sockets: 10, 11, 12, 13, 14, 15, 15, 17, 18, 19, 21, 22, 26, and 27mm

$50.17
Click To Buy

1/2" Drive Fractional 6 Point Universal Impact Socket Set - 7 Pc.

(SUN2654) 1/2" Drive Fractional 6 Point Universal Impact Socket Set - 7 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these standard length universal impact sockets: 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", and 7/8""

$65.13
Click To Buy

1/2" Drive Metric 6 Point Universal Impact Socket Set - 7 Pc.

(SUN2655) 1/2" Drive Metric 6 Point Universal Impact Socket Set - 7 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these standard length universal impact sockets: 13, 14, 15, 16, 17, 18, and 19mm

$65.13
Click To Buy

1/2" Drive Metric 6 Point Deep Universal Impact Socket Set - 10 Pc.

(SUN2658) 1/2" Drive Metric 6 Point Deep Universal Impact Socket Set - 10 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these deep length universal impact sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19mm

$103.19
Click To Buy

1/2" Drive Fractional 6 Point Deep Universal Impact Socket Set - 10 Pc.

(SUN2659) 1/2" Drive Fractional 6 Point Deep Universal Impact Socket Set - 10 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these deep length universal impact sockets: 3/8"", 7/16"", 5/8"", 11/16"", 3/4"",13/16"", 7/8"", and 15/16""

$101.90
Click To Buy

1/2" Dr. Deep Universal 12 POINT Fractional Impact Socket Set, 15 pc.

(SUN2661) 1/2" Dr. Deep Universal 12 POINT Fractional Impact Socket Set, 15 pc.Features: Set includes: 3/8"", 7/16"", 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1-1/8"", 1-3/16"" and 1-1/4"" Forged from the toughest steel, chrome molybdenum alloy Stored in a blow molded case for easy storage and transport Lifetime warranty

$198.00
Click To Buy

1/2" Dr. Deep Universal 12 POINT Metric Impact Socket Set, 15 pc.

(SUN2662) 1/2" Dr. Deep Universal 12 POINT Metric Impact Socket Set, 15 pc.Features: Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm and 24mm Forged from the toughest steel, chrome molybdenum alloy Stored in a blow molded case for easy storage and transport Lifetime warranty

$121.92
Click To Buy

1/2" Drive Fractional Master Impact Socket Set - 39 Pc.

(SUN2668) 1/2" Drive Fractional Master Impact Socket Set - 39 Pc.Features: Chrome moly alloy steel for long life Lifetime guarantee Includes: 3/8"" thru 1-1/2"" standard length, 3/8"" thru 1-1/2"" deep length, 1/2"" drive universal joint, blow molded case.

$139.31
Click To Buy

1/2" Drive Metric Master Impact Socket Set - 39 Pc.

(SUN2669) 1/2" Drive Metric Master Impact Socket Set - 39 Pc.Features: Chrome moly alloy steel for long life Lifetime guarantee Includes: 9mm thru 27mm and 30mm standard length, 9mm thru 27mm and 30mm deep length, 1/2"" drive universal joint, blow molded case

$108.30
Click To Buy

15 Pc. 1/2" Drive 12 Point Deep Fractional Impact Socket Set

(SUN2670) 15 Pc. 1/2" Drive 12 Point Deep Fractional Impact Socket SetFeatures: Sizes: 3/8"", 7/16"", 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1/1/8"", 1-3/16"", and 1-1/4"" Made of Chrome Molybdenum Alloy for longer wear. Packaged in blow molded case.

$70.18
Click To Buy

15 Pc. 1/2" Drive 12 Point Deep Metric Impact Socket Set

(SUN2672) 15 Pc. 1/2" Drive 12 Point Deep Metric Impact Socket SetFeatures: Sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, and 24mm Made of Chrome Molybdenum Alloy for longer wear. Packaged in blow molded case.

$54.50
Click To Buy

1/2" Drive Fractional 12 Point Standard Impact Socket Set - 14 Pc.

(SUN2678) 1/2" Drive Fractional 12 Point Standard Impact Socket Set - 14 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. Comes in molded tray and includes these standard length 12 point impact sockets: 7/16"", 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1-1/8"", 1-3/16"", and 1-1/4""

$44.53
Click To Buy