The Store

The Repair 71 Auto/Boat/Plane Section

4 Ton Capacity H.D. Long Ram Jack (Round Bottom)

(SUN5040) 4 Ton Capacity H.D. Long Ram Jack (Round Bottom)Features: Electrostatically painted to prevent corrosion Ideal use for extra long power stroke requirements Slow release feature Specifications: Capacity (Tons): 4 Power Lift (In.): 20-3/4 Closed Height (In.): 24-1/4 Raised Height (In.): 45 Shipping Wt. (Lbs.): 29

$84.70
Click To Buy

4-Ton Long Ram for SUN7700B

(SUN5041B) 4-Ton Long Ram for SUN7700BFeatures: Replacement ram only

$85.31
Click To Buy

1/2" Drive Fractional & Metric 6 Point Standard Impact Socket Set - 29 Pc.

(SUN5153DD) 1/2" Drive Fractional & Metric 6 Point Standard Impact Socket Set - 29 Pc.Features: No-Slip design in forged cro-moly steel grips flats of fasteners not the corners . Lifetime manufacturer''s warranty. 1/2"" drive, deep length 6 point impact sockets Comes in a blow molded case. Includes: Fractional - 7/16"", 1/2"", 9/16"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1-1/8"", and 1-1/4"" Metric - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, and 27mm Flip Sockets - 3/4""x13/16"" and 19mmx21mm

$102.54
Click To Buy

Engine Transverse Bar with Arm Support

(SUN5207) Engine Transverse Bar with Arm SupportFeatures: Supports Engine weighing up to 700 lbs. (317.5 kg). Designed for easy and safe removal of transaxle in front wheel drive vehicles. Adjustable transverse bar and two hook screws adjustable to 14"". Fully adjustable support arm for off-center loads. 2 pieces - 1/8"" braided steel cables included. Expands safely from 34.6"" up to a full 61"".

$92.61
Click To Buy

3/4 Ton Tilting Engine Sling

(SUN5208) 3/4 Ton Tilting Engine SlingFeatures: Designed for use with standard engine hoist hook. Acme threaded tilting shaft for strength and ease of adjustment Includes 4 chains and bolt-thru angle for easy mounting to most engines.

$48.21
Click To Buy

1" Drive Fractional & Metric Truck Service Impact Socket Set - 10 Pc.

(SUN5690A) 1" Drive Fractional & Metric Truck Service Impact Socket Set - 10 Pc.Features: No-Slip design in forged cro-moly. Lifetime manufacturer''s warranty (excludes thin wall sockets). 1"" drive sockets in a metal case. Set includes: Deep - 33mm, 1"", 1-3/16"", 1-3/4"" Thin Wall Deep - 1-1/16"", 1-1/8"", 1-1/4"" Square - 13/16"", 15/16"" Controlled Depth - 1-1/2""

$169.43
Click To Buy

1" Drive Metric Truck Service Impact Socket Set - 7 Pc.

(SUN5697M) 1" Drive Metric Truck Service Impact Socket Set - 7 Pc.Features: No-Slip design in forged cro-moly. Lifetime manufacturer''s warranty (excludes thin wall sockets). 1"" drive sockets in a blow molded case. Set includes: Deep - 27, 33, 35, 36, 41mm Square - 17, 21mm

$117.52
Click To Buy

3-1/2 Ton Capacity Service Jack

(SUN66035) 3-1/2 Ton Capacity Service JackFeatures: Heavy gauge flanged steel frame Heavy duty swivel rear casters 2-1/4"" width front wheels 3/8"" thick foam handle bumper for vehicle protection Universal joint release Double return springs 1"" thick, 5-1/2"" hard rubber saddle cover for protection of undercarriage Round cast steel saddle Safety overload system prevents use beyond rated capacity

$196.82
Click To Buy

2.25 Ton Capacity Trolley Jack

(SUN6625TR) 2.25 Ton Capacity Trolley JackFeatures: Our new 2.25 Ton Capacity Trolley Jack was designed with the end-user in mind. This style jack is much easier to use than a standard scissor jack and with a rated capacity of 2.25 tons, it will support more weight than many competitive models. The internal safety valve and built-in bypass prevents the user from overloading or overextending the jack. Plus, at only 14.5 lbs. anyone can carry it and the rear swivel caster will make it easy to position under the car. All of these features make this model a perfect item for your Automotive jobber and their customer base. Easier than a standard scissor jack 2.25 tons capacity Internal safety valve and built-in bypass prevent the user from overloading and overextending the jack. 14.5 lbs. Rear swivel caster

$51.79
Click To Buy

700-Lb. Capacity Heavy Duty Hi-Lift Transmission Jack

(SUN7700B) 700-Lb. Capacity Heavy Duty Hi-Lift Transmission JackFeatures: Channel iron extra heavy duty wide base for added stability Heavy duty ram with gradual release feature Large swivel casters for stability Adjustable saddle for ease of alignment Easily disassembled for transporting and storage Shipped in 2 cartons to allow delivery by UPS Replacement long ram available - Sunex 5041 Lift range: 50-3/8"" to 70-3/4"" Saddle tilt: Fwd./Back 15�??, Side 12�??

$219.61
Click To Buy

Fuel Tank Adapter for Transmission Jacks

(SUN7704) Fuel Tank Adapter for Transmission JacksFeatures: Gas Tank Handler Adapter holds automotive, SUV, and truck fuel tanks up to a 40 gallon capacity. Four support blocks can quickly adjust to fit most fuel tanks up to a 40 gallon capacity. Foam pads are provided to protect the fuel tank. 2 nylon ''cinch'' straps are provided to secure the gas tank during transport. Unique saddle adapter will fit most low profile and telescopic transmission jacks.

$145.76
Click To Buy

Lo-Boy Transmission Jack - 1,200 Lb.

(SUN7750) Lo-Boy Transmission Jack - 1,200 Lb.Features: Low lift height of only 5-3/4"", which accomidates most applications Versatile saddle design allows for total adjusment in every direction: 65 degrees foward, 18 degrees backward, 12 degress side to side tilt 360 degree rotation of pumping handle for ease of use Specifications: Capacity: 1,200 lbs. Low height: 5-3/4"" High height: 31-1/2"" Base dimensions: 36""x18-3/4"" Shipping weight: 110 lbs.

$352.54
Click To Buy

Economy Service Cart - 350 Lb. Capacity

(SUN8003SC) Economy Service Cart - 350 Lb. CapacityFeatures: Load capacity - 350 lbs. Large easy to maneuver 4"" wheels, 2 locking and 2 standard Durable powder coated finish Cart has two - 3"" deep shelves (30"" long x 16"" wide)

$62.60
Click To Buy

Locking Drawer for Service Cart

(SUN8006) Locking Drawer for Service CartFeatures: Drawer locks for sercurity, includes 2 keys Easily attaches to Sunnex 8003SC and 8005SC service carts. Also mounts to most other carts wide and deep enough to accomodate the drawer Dimensions: 30""Wx16H""x3D"" Durable powder coated red finish

$60.32
Click To Buy

Three Drawer Add-On Kit for Service Cart

(SUN8016) Three Drawer Add-On Kit for Service CartFeatures: Two half width drawers 12-1/4"" W x 15"" L x 1-1/2"" D; one full width drawer 26-1/2"" W x 15"" L x 1-1/2"" D. Fits Sunex 8005SC and other service carts with chrome legs.

$94.27
Click To Buy

Adjustable Heavy Duty Work Table with Drawer

(SUN8019) Adjustable Heavy Duty Work Table with DrawerFeatures: 20"" x 29"" work surface is segmented into 1 large (17"" x 29"") and 3 smaller compartments (9-1/2"" x 2-3/4""). No-Slip rubber liners for all 4 compartments Adjustable work surface height-up to 47-3/4"" 2"" deep drawers Supports up to 220lbs. Large 2"" swivel casters and a wide stable base Includes rubber bumpers on all four corners to protect car finishes and other surfaces from being damaged

$107.86
Click To Buy

Geared Engine Stand - 1,000 Lb.

(SUN8300GA) Geared Engine Stand - 1,000 Lb.Features: 63:1 worm gear ratio allows easy rotation of engine Self-locking in any rotated position Folds for easy storage Heavy-duty fixed rear castor and swivel locking front castors Oil Drip Pan available separately (SUN8300DP) Specifications: Capacity: 1,000 Lbs. Length: 34"" Front width: - 20.5"" Rear width: - 36.5"" Height (unfolded): 36"" Height (folded): 21""

$285.35
Click To Buy

Creeper - 4 Caster Straight Back

(SUN8504) Creeper - 4 Caster Straight BackFeatures: Length: 36"" Powder coated black frame Frame dimensions: 36""x17""x3-1/2"" Castor size: 2-1/2"" Padded headrest with full length cushioned red vinyl cover.

$39.32
Click To Buy

Creeper with Adjustable Headrest - 6 Casters

(SUN8505) Creeper with Adjustable Headrest - 6 CastersFeatures: Length: 40"" Powder coated black frame Frame dimensions: 40""x 17""x4"" Caster size: 2-1/2"" Full lenght cushioned red vinyl cover with adjustable headrest.

$59.46
Click To Buy

EZ Set Pneumatic Professional Shop Seat

(SUN8509) EZ Set Pneumatic Professional Shop SeatFeatures: Air cylinder for easy height adjustment. Five 2.5"" casters for ease of mobility. Cushioned black vinyl cover. Large, reinforced 15.25"" diameter 1"" deep tool tray. Seat Diameter: 12.5"" High Height: 20.5"" Low Height: 15.5"" Weight: 16.5 Lbs.

$42.56
Click To Buy

Ergonomic Plastic Creeper

(SUN8511) Ergonomic Plastic CreeperFeatures: 40"" long ergonomically designed frame Vinyl covered foam headrest for maximum comfort Two small storage trays conveniently located on either side 6 - 3"" casters make it extremely maneuverable and stable, these are fitted into steel bushings to provide added strength Low profile of 1"" allows for greater clearance under vehicles Made of material that is resistant to most solvents, grease and oils found in the common shop

$50.59
Click To Buy

1/2" Dr. 10-150 ft. lbs. Torque Wrench with Case

(SUN9701A) 1/2" Dr. 10-150 ft. lbs. Torque Wrench with CaseFeatures: Chrome molybdenum steel ratchet gears and all parts heat-treated, carbonized, quenched and twice tempered for long life SAE and Metric scales accurate to within +/- 3% 90 day warranty on calibration and manufacturing defects Blow molded case for easy storage and transport. Overall length: 18-1/4"" long

$33.45
Click To Buy

Jumbo Fractional Wrench Set - 1-5/16 to 2 Inch, 7 Pc.

(SUN9707) Jumbo Fractional Wrench Set - 1-5/16 to 2 Inch, 7 Pc.Features: Combination wrenches in 1-5/16"", 1-3/8"", 1-1/2"", 1-5/8"", 1-3/4"", 1-7/8"" and 2"" sizes High density, drop forged steel for strength and long service life Raised panel design Comes with sturdy metal clip for organized storage

$79.09
Click To Buy

14 Piece Angle Wrench Set - Fractional

(SUN9914) 14 Piece Angle Wrench Set - FractionalFeatures: Drop forged alloyed steel 15 degree and 60 degree angled heads Wrenches covered by manufacturer''s lifetime warranty Includes: 9/16"", 1/2"", 7/16"", 3/8"", 5/8"", 11/16"", 3/4"", 13/16"", 7/8"", 15/16"", 1"", 1-1/16"", 1-1/8"", 1-1/4""

$51.26
Click To Buy

14 Piece Angle Wrench Set - Metric

(SUN9914M) 14 Piece Angle Wrench Set - MetricFeatures: Drop forged alloyed steel 15 degree and 60 degree angled heads Wrenches covered by manufacturer''s lifetime warranty Includes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm 14mm, 15mm, 16mm, 17mm, 18mm, 19mm

$40.70
Click To Buy

3/8" Dr. Super Duty Air Ratchet Wrench

(SUNSX114) 3/8" Dr. Super Duty Air Ratchet WrenchFeatures: Full 60 ft. lbs. torque; 200 RPM Comfortable ergonomic grip Adjustable button trigger Rotary exhaust collar Large FWD/REV switch Automatic oiler for long life

$57.68
Click To Buy