The Store

The Repair 80 Auto/Boat/Plane Section

4" Mechanics'' Vise with Swivel Base

(WIL21300) 4" Mechanics'' Vise with Swivel BaseFeatures: Heavy duty, high strength 30,000 PSI castings. Large anvil work surface. 360�?? swivel base with double lockdowns. Chip and solvent resistant powder coat finish. Replaceable, hardened top and pipe jaws. Jaw Width: 4"" Jaw Opening: 4.5"" Ship Weight: 37 lbs.

$126.14
Click To Buy

5" Mechanics'' Vise with Swivel Base

(WIL21400) 5" Mechanics'' Vise with Swivel BaseFeatures: Heavy duty, high strength 30,000 PSI castings. Large anvil work surface. 360�?? swivel base with double lockdowns. Chip and solvent resistant powder coat finish. Replaceable, hardened top and pipe jaws. Jaw Width: 5"" Jaw Opening: 5.25"" Ship Weight: 50 lbs.

$180.59
Click To Buy

6" Mechanics'' Vise with Swivel Base

(WIL21500) 6" Mechanics'' Vise with Swivel BaseFeatures: Heavy duty, high strength 30,000 PSI castings. Large anvil work surface. 360�?? swivel base with double lockdowns. Chip and solvent resistant powder coat finish. Replaceable, hardened top and pipe jaws. Jaw Width: 6"" Jaw Opening: 5.75"" Ship Weight: 64 lbs.

$213.44
Click To Buy

4-1/2" Tradesman Vise

(WIL63199) 4-1/2" Tradesman ViseFeatures: 60,000 PSI ductile iron casting. Wider jaws for increased clamping surface. Fully enclosed spindle and nut for greater life. Large anvil surface. Replaceable jaws. 360�?? swivel base with double lockdowns. Made in U.S.A. Jaw Width: 4.5"" Jaw Opening: 4"" Shipping Weight: 42 lbs.

$310.18
Click To Buy

5-1/2" Tradesman Vise

(WIL63200) 5-1/2" Tradesman ViseFeatures: 60,000 PSI ductile iron casting. Wider jaws for increased clamping surface. Fully enclosed spindle and nut for greater life. Large anvil surface. Replaceable jaws. 360�?? swivel base with double lockdowns. Made in U.S.A. Jaw Width: 5.5"" Jaw Opening: 5"" Shipping Weight: 53 lbs.

$379.60
Click To Buy

6-1/2" Tradesman Vise

(WIL63201) 6-1/2" Tradesman ViseFeatures: 60,000 PSI ductile iron casting. Wider jaws for increased clamping surface. Fully enclosed spindle and nut for greater life. Large anvil surface. Replaceable jaws. 360�?? swivel base with double lockdowns. Made in U.S.A. Jaw Width: 6.5"" Jaw Opening: 6.5"" Shipping Weight: 73 lbs.

$480.24
Click To Buy

10" Heavy Duty Industrial Shears

(WIS20) 10" Heavy Duty Industrial ShearsFeatures: Finest quality cutlery steel Hot drop-forged polished blades Patented SET-EASY pivot Black handle Length: 10-1/4"" Blade length: 4-3/4""

$38.73
Click To Buy

Informant-2 Refrigerant and Combustible Gas Electronic Leak Detector

(YOK198042) Informant-2 Refrigerant and Combustible Gas Electronic Leak DetectorFeatures: TheInformant 2 is the only dual-purpose, refrigerant/combustibles leak detector on the market-is also the fastest, most precise leak detector available. Its powerful combination of advanced sensor technology, microprocessor - controlled circuitry, and state-of-the-art software design offers unsurpassed accuracy and reliability with astonishing speed-identifying either refrigerant or combustible leak sources in 2/10 of a second. The Informant 2 detects all combustible gases with a 50ppm minimum. It also includes an audible leak indicator with mute option, as well as dual bar graph displays and a flashing probe tip for visual confirmation. Plus, The Informant 2�?s lightweight, ergonomic design and flexible two-position probe with tapered end make finding hard-to-reach leak sources easy. The Informant 2 comes with a soft-sided carrying pouch that can be attached to the waist for easy portability. For added protection, anoptional rubber boot with MagLite flashlight cavity is available to facilitate one-handed inspections. Specifications: Refrigerants Detected: All CFC, HCFC, and HFC refrigerants including: R-12, R-22, R-123, R-134a, and blends R-404A, R-408A, R-409A, and R-410A (refrigerant containing Chlorine, Fluorine, or Bromine gas) Combustible Gases Detected: All combustible gases and vapors Sensitivity Refrigerant: .25 oz/year of R-134a (hardest to detect refrigerant) Sensitivity Combustible: Minimum 50 ppm (Methane) Alarms: Audible and visual dual LEDs

$349.94
Click To Buy

Tru Pointe Refrigerant Leak Detector

(YOK198106) Tru Pointe Refrigerant Leak DetectorFeatures: Bacharach''s newest hand held refrigerant leak detector designed specifically for technicians looking for an easy to use, reliable and inexpensive leak detector that can quickly and accurately mark any leak spot. The Tru Pointe is designed to be instantly responsive to all refrigerants. It is even accurate when used in environments where high levels of refrigerant vapors are present. No manual sensitivity adjustments are necessary during the inspection process. Simply turn the unit on, and let it mark the spot!. The Tru Pointe is suitable for HVAC Service Technicians, Refrigerant Service Technicians, Plant Maintenance Departments, Automotive Service Facilities, and Refrigerant & Environmental Chamber Manufactures who are in need of a small, lightweight and rugged instrument that is capable of detecting and then pinpointing small to large refrigerant leaks in tight spaces such as those found in refrigeration units and automobile engine compartments. Features: Detects all CFC, HFC, and HCFC refrigerants Patented Heated Diode Sensor Technology Instantaneous response time Innovative sensor replacement design Battery-powered with low battery indication Long-life, DC brushless fan High and low-sensitivity modes Automatic zero and background compensation Audible & visual leak detection Easy to use, one-handed operation No user calibration required

$167.83
Click To Buy

A/C Refrigerant Leak Detector

(YOKH10PM) A/C Refrigerant Leak DetectorFeatures: Detects all CFC, HCFC and HFC refrigerants Pinpoints both small and large leaks Easy to use visual sensor calibration system Positive ion-emission heated-diode sensing element Powered by the 12V rechargeable battery, AC or DC external powered Accuracy exceeds J1627 Probe length: 4.5 feet 5 year manufacturer''s warranty

$386.94
Click To Buy

12 Volt 3/8" Drive Cordless Ratchet Wrench

(ZNX3120) 12 Volt 3/8" Drive Cordless Ratchet WrenchFeatures: 45 ft.-lb max torque. 200 RPM free speed. 45 minutes re-charge time. Advanced Ni-Cad battery. Lightweight - 3.66 lbs. Comes with 12V cordless ratchet, one battery, fast charger, and molded storage case.

$208.92
Click To Buy

14V.4 3/8" Drive Hi-Performance Cordless Impact Wrench Kit

(ZNX3140) 14V.4 3/8" Drive Hi-Performance Cordless Impact Wrench KitFeatures: Znex took the cordless impact wrench market by storm less than 2 years ago. Now Znex is ready to shake up the market again. The new Znex impact wrenches boast many improvements over their highly successful predecessors including: Maximum torque 150 ft.-lbs High torque output motor for incredible power. Composite body for increased strength and less weight. Swiveling battery pack swings out for more clearance. Panasonic batteries for the most power and highest quality. LED lighting to light up work piece. Molded ""comfort"" handle lessens fatigue. Hand lanyard to help minimize accidental drops. Ergonomic design for function and appearance.

$206.72
Click To Buy

Roloc Type Air Sander

(ZNXZX9411) Roloc Type Air SanderFeatures: Includes three shafts, three disc pads (1"", 2"" and 3""). Conforms to 3M specs. Powerful 3/4 hp heavy duty motor. All ball bearing construction Quick release chuck eases disc change outs. Rear exhaust reduces noise and avoids blowing dust. Ergonomic design. 3 setting regulator controlled speed ranges.

$91.14
Click To Buy

120 LED Automotive Under Hood Light

(ALRLEH120) 120 LED Automotive Under Hood LightFeatures: 120 LED adjustable under hood clamp light. Fresnel lens directs light down, eliminating eye glare ""On/Off"" rocker switch Scratch-proof vinyl-coated spring loaded articulated clamps Expands to 77"" with set knobs Removable from clamp bar with handle and swivel hook 25 ft oil resistant cord

$124.98
Click To Buy

Air Spot Drill -500 RPM with 5.5" Deep Clamp Kit and 4 Drill Bits

(AP1757) Air Spot Drill -500 RPM with 5.5" Deep Clamp Kit and 4 Drill BitsFeatures: 2 Speed Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath Drills out the entire spot-weld, eliminating the need for grinding Kit Includes: 1 - Air Spot Weld Drill 1 - 5.5"" Deep Clamp 4 - Drill Bits (2-8mm, 2-6.5mm) 1 - End Line Oiler (3000) 1 - 3 Way Swivel (3SB10) 1 - Plastic Blow Molded Case Specifications: Drill Bit Size Chuck Cap.: 5/16"" Free Speed: 500rpm Overall Length: 8-3/4"" (222mm) Air Inlet Thread NPT: 1/4"" Air Hose I.D. Size: 3/8"" (10mm)

$264.39
Click To Buy

Rechargeable 60 LED Work Light

(AP6320) Rechargeable 60 LED Work LightFeatures: 60 super bright LED 12000 MCD Single charge provides 3-4 hours of continuous use Low energy consumption - High light output Minimal heat generated Unit comes with 120V AC main charger 5400mAh, Ni-MH Battery Over discharge protection design CE approved UL approved transformer

$33.86
Click To Buy

90 LED Rechargeable Worklight

(AP6390) 90 LED Rechargeable WorklightFeatures: 90 super bright LEDs - 12000 mCd (millicandela) Single charge provides up to 3-4 hours of continuous use Ergonomically designed handle Battery takes approx. 5-6 hours to charge Low energy consumption - High light output Minimal heat generated Unit comes with 120V AC main charger 7200mAh, Ni-MH Battery IP32 waterproof battery pack Designed with Complete Discharge Protection with Indicator Light CE approved UL approved transformer

$46.89
Click To Buy

Harmonic Damper Holder and Puller Set

(AP7822) Harmonic Damper Holder and Puller SetFeatures: Tool can be used to aid in the removal and installation of the crank bolt used on most Chrysler, Hyundai, Mazda, and GM engines. Aids in the removal of the harmonic damper pulleys even if pulley is hard to access and remove due to space limitations in and around the engine compartment. In most cases this compact tool eliminates the need to remove the radiator before being able to remove the pulley. Low profile puller is designed fo use on most automobiles, vans, and pickups. Damper holding tool works with 1/2"" square drive breaker bar or ratchet. Comes in molded case.

$67.40
Click To Buy

8 Piece Sensor & Sending Unit Socket Set

(AP78408) 8 Piece Sensor & Sending Unit Socket SetFeatures: SET INCLUDES: 22mm Special Tube Socket (78408-01) - Allows the strut tower retaining nut on most European vehicles to be secured, which is a critical part of the front shock tension adjustment process. Designed to be used with R & R on oxygen sensors, Mercedes Diesel Injectors, OM604, OM605 & OM606. Designed to be used with a �??"" drive tool. Oxygen Sensor Thread Chaser (78408-02) - Allows threads on oxygen sensor holes to be cleaned, and can also be used to clean and repair threads on exhaust oxygen sensor parts that have been damaged. Unit can also be used to clean threads on M18 x 1.5 spark plug hole. Designed to be used with �??"" hex socket or 3/8"" square drive tool. IMPORTANT: Anit-seize material must be used when performing this application. Oxygen Sensor Wrenches Offset (2-1/8'''') & Super Duty 12 & 6 Point Socket (78408-03) - Allows for the maximum accessibility to hard to reach areas when trying to remove socket sensors. The 12-point side provides the technician twice the amount of ""clock angle"" positions as compared to most oxygen sensors on the market. The 6 point side gives the technician a maximum holding power when attempting to remove oxygen sensors that are corroded. Unit can be used with most oxygen sensor wire/connector configurations. Designed to be used with 3/8"" drive tool. Oxygen Sensor Socket (78408-04) - Allows for usage on most domestic and imported vehicles with oxygen sensors; the specially designed socket with side slot permits wire to be cleared. This socket is 3-7/8"" long, has a 1"" male hex drive on top and has a 7/8"" 6 point opening. Designed to be used with a �??"" square drive tool. 1/2"" Drive x 29 x 90mm Oxygen Sensor Socket (7801-01) - Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2"" drive tool. 3/8"" Drive x 7/8"" x 90mm Oxygen Sensor Socket (7801-02) - Designed to remove and install vacuum switches with a 7/8"" hex and some oxygen sensors. Designed to be used with 3/8"" drive tool or with a 1"" wrench. 3/8"" Drive x 7/8"" x 50mm Heated Oxygen Sensor Socket (7801-06) - Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2"" drive for easy access. 3/8"" x 7/8"" x 30mm Offset Oxygen Sensor Wrench (7801-07) - Low profile design for use in tight spaces. Designed to be used with 3/8"" drive tool.

$89.66
Click To Buy

44 Piece Master Radio Removal Set

(AP78444) 44 Piece Master Radio Removal SetFeatures: Set includes the following tools needed to install and remove radios: 2 - Radio Removal U-Hooks (Ford/VW/Audi/Grundig/Blaupunkt) 1 - Special Pentagon Wrench (BMW) 4 - Radio Removal Keys (VW/Audi/Becker/Mercedes-Benz) 2 - Radio Removal Keys (Mercedes-Benz/Porsche/Becker) 2 - Radio Removal Keys (VW) 1 - Allen Hex Wrench (BMW/Opel) 2 - Radio Removal U-Hooks (New Blaupunkt) 6 - Radio Removal Keys (Mercedes-Benz/BMW) 2 - Radio Removal Keys (Kenwood II 1998-2001) 2 - Radio Removal Keys (Sony II ab 2002) 2 - Radio Removal Keys (Kenwood III ab 2002) 2 - Radio Removal Keys (Pioneer & JVC) 2 - Radio Removal Keys (Sony I bis 2005) 2 - Radio Removal Keys (Panasonic) 2 - Radio Removal Keys (Kenwood I bis 1998) 2 - Radio Removal Keys (Kenwood MASK) 2 - Radio Removal Keys (Clarion-New) 2 - Radio Removal Keys (Clarion (ALT)) 2 - Radio Removal Keys (Panasonic 2006) 2 - Radio Removal Keys (Sony IDIC 2005)

$65.13
Click To Buy

Heavy-Duty Plastic Utitlity Cart

(AP8330) Heavy-Duty Plastic Utitlity CartFeatures: For shop, office, warehouse or medical facility use Has two hand holes on each side Cart can be pushed or pulled from either side Trays are 3-1/2"" deep and can hold up to 300 lbs. 4"" heavy-duty swivel casters Tread will not mark floors Specifications: Size (W x L x H): 16"" x 30"" x 31"" Weight: 21 Lbs.

$77.62
Click To Buy

Grease Fitting Adapter Set

(AP9430) Grease Fitting Adapter SetFeatures: Convenient set offers the most popular fittings in one kit Quick connect couplers Works with most standard grease guns Blow molded case for easy storage and transport Includes: Press-on 90 degree angle adapter, Straight adapter, 12"" Hose extension, Slide-on 90 degree adapter, Rubber tipped adapter, Needle adapter, 360-degree adapter

$36.77
Click To Buy

12V Cordless Caulking Gun with 200ml Dual Cartridge Dispenser Gun

(AP9807) 12V Cordless Caulking Gun with 200ml Dual Cartridge Dispenser GunFeatures: AP 9806 Includes New Hi-Speed charger - 3.5 times faster 12 V Ni-cad Battery 620 Lbs. of pushing force Handles high viscosity materials such as urethanes Up to 30 cartridges on a single charge (Depending on material thickness) Variable Speed Unit dispenses material from sausage and cartridge packs 360-degree carriage rotation Tool weight: 7lbs. Includes following accessories: 3.5 Hour charger (UL Listed) UL Listed ballast Sausage and cartridge plunger 1 - 12V Ni-cad Battery Blow Molded Case AP 4533 200ml Manual Dual Cartridge Dispenser (approximately 7oz.) Low to medium output applications No external air or power required Portable

$82.50
Click To Buy

COOLING SYSTEM ADAPTER KIT for EUROPEAN VEHICLES - 6 Pc.

(ASTFZ1002) COOLING SYSTEM ADAPTER KIT for EUROPEAN VEHICLES - 6 Pc.Features: Best choice for European vehicle applications. Applications include:Audi, VW, BMW, Mercedes Benz, Range Rover, Volvo, Renault, and Sterling. Kit includes adapters: AST FZ22, FZ31, FZ41, FZ25, BMW345, & M0349. Comes in a molded case with application chart. Designed to work with Stant Cooling System Pressure Tester and other compatible testers. Detailed application listing is available by request.

$220.19
Click To Buy

Timing Chain & Gears Manual 2007

(AUT07170) Timing Chain & Gears Manual 2007Features: The manual features general removal and installation instructions of timing chains and gears, as well as valve timing procedures for DOMESTIC & IMPORTED VEHICLES from 1992 - 2007. Featuring: Valve Timing Procedures for Domestic and Imported Vehicles Chain & gear replacement General removal & installation instructions Safety precautions Special tools Tensioner adjustments Tightening torques Timing marks Valve timing instructions Tensioner release & reset methods Chain routing & sprocket/gear valve timing marks

$59.68
Click To Buy

Under Hood Light and LightPerch Combo

(CEN13003) Under Hood Light and LightPerch ComboFeatures: Gives hands-free lighting of the entire engine compartment. Works on all passenger cars and light duty trucks. Made in the U.S.A. Underhood light features: - 25 watt cool running flourescent bulb; 44"" long - Extra thick shatterproof housing with a 25'' long cord LightPerch features: - Opens from 4'' to 6''6"" - Self adjusts to fit hood - Easily positioned to better illuminate your work area - Covered arms protect the hood from scratches

$133.72
Click To Buy