The Store

The Repair 85 Auto/Boat/Plane Section

10.5LB Sledge Dead Blow Hammer - 3.25" Face Diameter; 30" Overall Length

(SK9210) 10.5LB Sledge Dead Blow Hammer - 3.25" Face Diameter; 30" Overall LengthFeatures: 10.5LB Sledge Dead Blow Hammer - 3.25" Face Diameter; 30" Overall Length

$147.60
Click To Buy

Pro Vision 636 - Small Diameter 36" Long Fiberoptic Borescope

(SLIPV636) Pro Vision 636 - Small Diameter 36" Long Fiberoptic BorescopeFeatures: Reduced diameter 0.23"" flexible fiberoptic cable fits into smaller holes - as small as 1/4""! Powerful lamp illuminates dark locations for clear viewing Flexible, omni direction cable bends in every direction to allow precise viewing - even around obstacles. Pressure activated light switch can not be accidently left on. Integrated focus ring for smooth, continuous focusing Ergonomically designed, non-slip fits comfortably in one hand Cable can reach deep into walls, drains, engines blocks, vents etc. Sealed lens and cable are submersible for underwater use. Warrantied to be free from defects in materials and workmanship for 90 days Comes with molded case and instructions Requires: 2 AA batteries (not included)

$236.70
Click To Buy

GM Oil Pump Drive Removal Tool

(SP65550) GM Oil Pump Drive Removal ToolFeatures: This tool saves 1/2 hour per job. This special tool has been designed to easily remove the oil pump drive on most G.M. V-6 engines with the intake manifold still attached to the engine block and cylinder heads. The oil pump drive is located in a very small area that is surrounded by the intake manifold and other obstructions. With this remover, the job is done easily and quickly. Works on theses GM engines: 2.8L V-6 1987-1989 3.1L V-6 1990-1994 3100 V-6 1994-2005 3.4L V-6 1999 and later

$48.49
Click To Buy

TPMS Service Tool Kit

(STE96254) TPMS Service Tool KitFeatures: Kit includes: 1/4""in-lb Micro-Adjustable Torque Wrench 3-150 Valve Core Torque Tool, 4 in-lbs 1/4"" Drive Deep Socket, 10mm, 6Pt 1/4"" Drive Deep Socket, 11mm, 6Pt 1/4"" Drive Deep Socket, 12mm, 6Pt

$108.17
Click To Buy

Digital Compression Recorder

(STE97102) Digital Compression RecorderFeatures: Stores readings from up to 16 cylinders Eliminates the need to manually record compression test readings for each cylinder while performing compression test Unit is capable of storing test measurements for up to 16 cylinders Calculates average reading across cylinders, highest cylinder reading and lowest cylinder reading during test Technician can scroll display to review readings for each cylinder at end of test cycle Auto-Off function to conserve battery power Repair kit included Kit includes: Control head, 8 of the most popular compression adapters, adapter repair kit and high-impact blow molded storage case

$97.98
Click To Buy

7" Angle Polisher/Buffer - Variable Speed

(STE97565) 7" Angle Polisher/Buffer - Variable SpeedFeatures: Designed for the professional user Soft start motor helps avoid compound splatter at start-up Powerful variable speed motor makes polishing or sanding easy - 10.8 Amps Heavy duty variable speed motor and gear box with spindle lock Right and left mounting points for auxiliary handle ""D"" handle and straight auxiliary handle included Dial speed setting and variable trigger for maximum control 1,000 - 3,000 RPM Spindle Thread: 5/8"" - 11

$72.78
Click To Buy

4" Reversible Gear Puller - 2 Tons

(SUN3913) 4" Reversible Gear Puller - 2 TonsFeatures: Patented quick change design goes from 2 to 3 arm puller in seconds - No tools needed! Can be assembled to make a two or three jaw puller when additional stability is needed Interchangeable to internal or external Reversible jaw design for added versatility and a broader range of pulling capability Ideal for pulling gears, bearings, pulleys, and other press fit parts

$52.49
Click To Buy

7" Reversible Gear Puller - 5 Tons

(SUN3917) 7" Reversible Gear Puller - 5 TonsFeatures: Patented quick-change design goes from 2 to 3-arm puller in seconds-no tools needed! Can be assembled to make a two or three jaw puller when additional stability is needed Interchangeable to internal or external Reversible jaw design for added versatility and a broader range of pulling capability Ideal for pulling gears, bearings, pulleys, and other press fit parts

$100.93
Click To Buy

Professional Screwdriver and Mini Pick Set, 10 pc.

(SUN9830) Professional Screwdriver and Mini Pick Set, 10 pc.Features: Newly designed comfort grip handle (patent pending) Includes five slotted screwdrivers, three Phillips screwdrivers and two Mini Picks 3/16""x3"", 1/4""x1-1/2"", 1/4""x4"", 5/16""x6"", 3/8""x8"", # 1 Phillips x 3"", #2 Phillips x 1-1/2"", #2 Phillips x 4"" and a mini hook and pick Hardened chrome vanadium shafts Vapor blasted magnetic tips Hex bolsters on most sizes for maximum turning power Packaged in heavy duty plastic tray for easy storage Fully guaranteed

$35.09
Click To Buy

Pin Stripe Removal Tool

(SUNSXC601) Pin Stripe Removal ToolFeatures: Heavy-duty blow molded case Side handle for more comfortable and efficient use 5 eraser pads included One year warranty (tool only)

$125.53
Click To Buy

In-Line Spark Checker for Recessed Plugs, Noid Lights and IAC Test Lights Kit

(TA36350) In-Line Spark Checker for Recessed Plugs, Noid Lights and IAC Test Lights KitFeatures: Use to test spark plug circuits, electronic fuel injection signals and idle air control circuits. Includes: - No. 23970, In-Line Spark Checker Kit for Recessed Plugs. This is a must for testing newer vehicles with recessed spark plugs. Can also be used to test conventional and coil-on plug ignition systems. - 8 Noid Lights for checking GM PFI, Ford TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, BOSCH 2 and GM MULTEC 2 - 2 IAC Test Lights for straight and 90�?? applications Quickly diagnose ""no start"" and engine misses conditions in the electrical fuel injection and spark plug circuits. Analyze rough running engines.

$38.84
Click To Buy

MALE Q/SLIDE TERMINAL

(3M11822) MALE Q/SLIDE TERMINALFeatures: MALE Q/SLIDE TERMINAL

$39.51
Click To Buy

2" Roloc 50 Grit Grinding Discs - 25 Pk. (Green)

(3M1396) 2" Roloc 50 Grit Grinding Discs - 25 Pk. (Green)Features: Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing

$31.97
Click To Buy

2" Roloc 36 Grit Grinding Discs - 25 Pk. (Brown)

(3M1397) 2" Roloc 36 Grit Grinding Discs - 25 Pk. (Brown)Features: Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing

$33.73
Click To Buy

2" Roloc 24 Grit Grinding Discs - 25 Pk. (Black)

(3M1398) 2" Roloc 24 Grit Grinding Discs - 25 Pk. (Black)Features: Genuine 3M Roloc 1/2 turn on and 1/2 turn off; speeds disc changing

$35.58
Click To Buy

Green Corps Cut-Off Wheel, 3 in x 1/32 in x 3/8 in - 5 Pack

(3M1989) Green Corps Cut-Off Wheel, 3 in x 1/32 in x 3/8 in - 5 PackFeatures: 3M''s highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels. Typically last 3 to 8 times longer than competitive aluminum oxide cut-off wheels on the following materials: steel, stainless steel, sheet metal, fiberglass and aircraft alloys. Green Corps brand cut-off wheels resist cracking and chipping and generate a cooler cutting action on most materials. Size: 3"" x 1/32"" x 3/8"" Package of 5 cut-off wheels Max Operating Speed: 26,000

$26.19
Click To Buy

Green Corps Cut-Off Wheel, 3 in x 1/16 in x 3/8 in - 5 Pack

(3M1990) Green Corps Cut-Off Wheel, 3 in x 1/16 in x 3/8 in - 5 PackFeatures: 3M''s highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels. Typically last 3 to 8 times longer than competitive aluminum oxide cut-off wheels on the following materials: steel, stainless steel, sheet metal, fiberglass and aircraft alloys. Green Corps brand cut-off wheels resist cracking and chipping and generate a cooler cutting action on most materials. Size: 3"" x 1/32"" x 3/8"" Package of 5 cut-off wheels Max Operating Speed: 26,000

$26.19
Click To Buy

Reinforced Weld Grinding Wheel 3"x3/16" - 5 Pk.

(3M1991) Reinforced Weld Grinding Wheel 3"x3/16" - 5 Pk.Features: Green Corps reinforced weld grinding wheel, 3""x3/16"" with 3/8"" arbor hole 5 pack of wheels

$30.64
Click To Buy

Imperial Wetordry Sandpaper P1200 Grit, 5.5"x9"- 50 Sheets

(3M2022) Imperial Wetordry Sandpaper P1200 Grit, 5.5"x9"- 50 SheetsFeatures: 50 pack of 5-1/2""x9"" Ultra Fine Grit sheets Designed for light sanding prior to compounding Sheet size eliminates the need of tearing - entire sheets can be used Durable backing resists tearing and wrinkling

$24.50
Click To Buy

Imperial Wetordry Sandpaper P1500 Grit, 5.5"x9"- 50 Sheets

(3M2023) Imperial Wetordry Sandpaper P1500 Grit, 5.5"x9"- 50 SheetsFeatures: Designed for light sanding prior to compounding Sheet size eliminates the need of tearing - entire sheet can be used Durable backing resists tearing and wrinkling 5-1/2"" x 9"" Micro fine 1500

$30.19
Click To Buy

6" Stikit D/A Disc Pad

(3M35576) 6" Stikit D/A Disc PadFeatures: Specially made for use with 3M Stikit discs Vinyl pad face provides good disc adhesion yet allows easy disc removal Pad is lightweight, shock resistant and well-balanced Made with a tough, durable plastic hub and a comfortable foam ''body'' Maximum operating speed is 10,000 RPM

$22.79
Click To Buy

Perfect-ItII Foam Compounding Pad - 8", 2 Pk.

(3M5723) Perfect-ItII Foam Compounding Pad - 8", 2 Pk.Features: Utilizes a 3m patented convoluted foam face When used with Perfect-ItII rubbing compound or equivalent, microfine 2000 grade scratches are effectively removed from any automotive paint finish leaving an extremely fine finish Use with Hookit (3M 5717) or Perfect-It back-up pads on a slow-speed polisher 2 pack of foam pads

$26.86
Click To Buy

Perfect-ItII Foam Polishing Pad - 8", 2 Pk.

(3M5725) Perfect-ItII Foam Polishing Pad - 8", 2 Pk.Features: Utilizes a 3m patented convoluted foam face Produces a wheel mark free automotive paint surface when used in conjunction with Perfect-ItII Foam Polishing Pad Glaze (3M 5996) Use with Hookit (3M 5717) or Perfect-It back-up pads on a slow-speed polisher 2 pack of foam pads

$26.86
Click To Buy

Perfect-ItII Foam Polishing Pad Glaze - Quart

(3M5996) Perfect-ItII Foam Polishing Pad Glaze - QuartFeatures: Uniquely formulated to remove compound swirl marks Leaves a wheel mark free finish when applied with the Perfect-It Foam Polishing Pad (3M 5725). Compatible with all types of paint; glaze contains no silicones or wax. Clear coat safe Formulated for dark colored paints - easier detailing and clean-up 1-Quart in an easy apply bottle

$32.80
Click To Buy

Peel-Off Lens Covers - 25 Pk.

(3M7142) Peel-Off Lens Covers - 25 Pk.Features: For 3M 7162

$26.35
Click To Buy

Scotch-Brite Abrasive Hand Pads - General Purpose, Maroon

(3M7447) Scotch-Brite Abrasive Hand Pads - General Purpose, MaroonFeatures: Box of 20 Scotch Brite maroon pads Pad size: 6""x9"" For scuffing before applying paint and primer-surfacer For used car reconditioning, cleaning upholstery, headliners, doorpads, chrome and cleaning white wall tires. Made of genuine ScotchBrite nylon web Rinses clean to be used over and over again

$20.45
Click To Buy