The Store

The Repair 95 Auto/Boat/Plane Section

Tubing Bender

(KD2189) Tubing BenderFeatures: Bend 3/16, 1/4, 5/16 and 3/8"" copper and steel tubing. Tool makes tight bends without the tube collapsing. Roller adapters are included for each tubing size. Place tubing between the adapter and studs and squeeze the handles to bend.

$21.36
Click To Buy

Pitman Arm Puller

(KD2289) Pitman Arm PullerFeatures: Puller removes full-size Pitman arms. To use, mount jaws over Pitman arm and turn center screw with wrench until tight. Strike center screw with hammer to release Pitman arm. No other tools are needed. Puller has a drop-forged and heat-treated steel yoke. Screw size 5/8""-18 thread.

$21.76
Click To Buy

Compression Tester

(KD2428) Compression TesterFeatures: Tester checks cylinder compression from 0 to 300 PSI (0 to 21kg/cm2). Adapters fit 14 and 18mm spark plug holes and special air-hold valve is included to reset gauge easily. Tester has 16"" rubber hose and is a serviceable product.

$27.28
Click To Buy

Hand Bearing Packer

(KD2775) Hand Bearing PackerFeatures: Self-contained bearing packer saves time and can be used anywhere. No air line or grease gun required. Packs 50 to 60 bearings without refilling. Transparent, impact resistant cup allows grease level check. Use on all cage-type roller and ball bearings up to 2"" bore.

$18.71
Click To Buy

Engine Cylinder Hone

(KD2833) Engine Cylinder HoneFeatures: Hone and remove glaze from engine cylinders from 2"" to 7"" (51 to 177mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium grit stones No. 240.

$20.49
Click To Buy

1/2" Professional-Duty Jacobs Hand-Tite Keyless Chuck

(KD31038) 1/2" Professional-Duty Jacobs Hand-Tite Keyless ChuckFeatures: Jacobs keyless chucks significantly reduce bit changeover time and boost productivity. Based on an exclusive patented design, the Jacobs keyless chuck achieves higher gripping torque than standard keyed chucks, and there is never a key to misplace. They feature a nonrusting, high-performance body with a unique sure-grip sleeve for maximum user comfort and hand tightening efficiency.

$26.26
Click To Buy

Large Convertible Internal and External Snap Ring Pliers

(KD3151) Large Convertible Internal and External Snap Ring PliersFeatures: Easily convert for either external or internal use on snap rings. Unique push-button feature allows for effortless change. Tool comes with heavy-duty cushion-grip handles to provide comfort and broached jaws for tip control and stability. Use pliers on most internal snap-rings 3/8 through 2"" (9.5 through 50.8mm) and external snap rings 1/4 through 2"" (6.4 through 50.8mm). Pliers include 5 pairs of color-coded tips in sizes 0.036, 0.047 straight and 90 degree and 0.070 straight. Hex stock size of tips .092"". Replacement part: 3151-77 Point Kit (includes 2 each of 5 different sizes: 0.036, 0.047 straight and 90 degree and 0.070 straight.)

$20.32
Click To Buy

Universal Brake Bleeder Adapter

(KD3297) Universal Brake Bleeder AdapterFeatures: Adapter pressurizes plastic or metal resevoir brake systems on most late model domestic and import vehicles and light-duty trucks with single filler caps. For use with KD Brake Bleeder Tanks (KD 2222 or KD 2901). Kit includes: cover plate, clamp assembly and 2 different size cones for complete coverage ranging from 9/16"" to 2-3/4"" in diameter.

$28.70
Click To Buy

Wheel Weight Tool

(KD3358) Wheel Weight ToolFeatures: Tool installs, removes, trims and tightens all types of clip-on wheel weights. It features a special plastic-type material on the hammer head for safe, mar-free installation of specially coated wheel weights used on alloy wheels. Tool has a plastisol-dipped handle for comfort. Replacement part: 3358-04 Plastic tip

$22.12
Click To Buy

Oil Filter Wrench Pliers - Fixed Range 2-15/16" to 3-5/8"

(KD3368) Oil Filter Wrench Pliers - Fixed Range 2-15/16" to 3-5/8"Features: Pliers remove stubborn, on-tight filters. Unique double handle design allows for better leverage to bear down harder. Tool is forged for superior strength and plastisol coated handles provide a firm grip.

$19.50
Click To Buy

Oil Filter Wrench Pliers - Fixed Range 2-3/4" to 3-1/8"

(KD3369) Oil Filter Wrench Pliers - Fixed Range 2-3/4" to 3-1/8"Features: Pliers remove stubborn, on-tight filters. Unique double handle design allows for better leverage to bear down harder. Tool is forged for superior strength and plastisol coated handles provide a firm grip.

$20.90
Click To Buy

Adjustable Oil Filter Wrench Pliers

(KD3508) Adjustable Oil Filter Wrench PliersFeatures: Pliers cover a complete range of filter removal from 2"" to 5"" (50mm to 125mm) in diameter. Ratchet and lock mechanism allow for multiple settings for sure fit, eliminating slippage. Jaws are grooved for better holding of the filter. Forged for superior strength. Plastisol coated handles provide a firm grip.

$21.16
Click To Buy

Hog Ring Plier Set - 2 Pc.

(KD3702) Hog Ring Plier Set - 2 Pc.Features: Specially designed for installation of Hog Ring fasterners. Grips and holds hog ring during closure. Spring loaded to hold ring in jaws during use. Cushioned grip handle. Includes both 45�?? and Straight hog ring pliers.

$27.84
Click To Buy

7 Pc. Hook and Pick Set

(KD3708) 7 Pc. Hook and Pick SetFeatures: Includes: Awl, Hook Tip, 90 Degree Tip, Small Awl, Small Hook Tip, Small 90 Degree Tip, and Small Combination Tip. Comes in a molded storage case.

$22.30
Click To Buy

2-1/2" Hose Pinch-Off Pliers

(KD3793) 2-1/2" Hose Pinch-Off PliersFeatures: Applications: Ideal for use on radiator and heater hoses, water, air, vacuum and fuel lines. Made from high carbon and treated steel for long life. Patented clamping and automatic locking mechanism. Cushion grip handles for comfort and control. OD Capacity: 2-1/2""

$28.74
Click To Buy

Cable Hose Clamp Tip

(KD3804) Cable Hose Clamp TipFeatures: For use with GearPlier

$21.09
Click To Buy

CamClamp - Universal Timing Gear Locking Tool

(KD3840) CamClamp - Universal Timing Gear Locking ToolFeatures: The KD 3840 CamClamp - Universal Timing Gear Tool is specifically designed to retain sprocket wheels to maintain proper timing during Timing belt service. This is critical, since the timing of Dual Overhead Systems is time consuming and expensive if the cams get out of position during belt service. Works on both Dual and Quad systems. What makes the KD version the better value is that it is the Patented Uni-Tooth design works on both USA and Imports by gripping the geared side of the Cam Sprocket. Competitive designs grip the inside walls, do not have a positive grip, and are prone to slippage particularly above spacing of 1"". Plus the KD version is priced more than 50% less than many competitve models. A major plus for Quad applications requiring 2 tools. Fits Gears with diameters from 4 to 6"" and spacing up to 3"".

$31.59
Click To Buy

3/8" - 5 Pc. Filter Cap Wrench Set

(KD3865) 3/8" - 5 Pc. Filter Cap Wrench SetFeatures: Durable heat resitent caps that don�?t bend or loose shape. Provides high torque capacity to remove the most stubborn oil fliters. Includes: 65/67mm (14 flute), 74/76mm-(15 flute), 76mm-(14 flute), 93 mm-(15 flute), 76/80/93-(36 Flute) Plastic Caps w/ Case.

$25.14
Click To Buy

Power Steering Pump Pulley Kit

(KD41560) Power Steering Pump Pulley KitFeatures: Ideal for expanding tail pipes and exhaust system removal and installation Kit contents: Exhaust and Tailpipe Cutter (Complete Tool), Cutter Chain Assembly, Exhaust and Tailpipe Expander, and Tailpipe Chisel Removes and installs power steering pump pulleys off most domestic vehicles. Includes the necessary adapters for servicing GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines. Includes quick disconnect tool for GM 1/2, 3/4, and 1 ton pickups, 3893 Disconnect Tool; 41561 Bushing and Screw Set and the 41562 Bushing and Screw Set. Fits pulley hubs with diameters of 1-1/8 in., 1-1/4 in., 1-5/16 in. and 1-3/8 in.

$28.97
Click To Buy

Rear Axle Bearing Puller Kit

(KD41710) Rear Axle Bearing Puller KitFeatures: Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removeable hinged style lid allows for convenient storage in tool box drawers. Individual part numbers molded into case for easy reference. Applications: 1 in. x 1-7/8 in. Puller - fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 1-7/8 in. 1-5/16 in. x 2-3/8 in. Puller - fits minimum bearing tube I.D. of 1-5/16 in. and maximum axle tube I.D. of 2-3/8 in. 1-3/8 in. x 2-7/8 in. Puller - fits minimum bearing tube I.D. of 1-3/8 in. and maximum axle tube I.D. of 2-7/8 in.

$27.58
Click To Buy

3 Piece, Oil Pump Primer Kit

(KD41770) 3 Piece, Oil Pump Primer KitFeatures: Oil Pump Primers protect freshly rebuilt or modified engines from premature wear caused by a dry start. Kit contents: GM Oil Pump Primer, Ford Oil Pump Primer 5/16"" Hex Drive and Ford Oil Pump Primer 1/4"" Hex Drive

$30.48
Click To Buy

General Purpose Bushing Driver Kit

(KD41780) General Purpose Bushing Driver KitFeatures: Perfect for removing and inserting bushings in cars, trucks buses, tractors, construction and off-road equipment. This set includes small, medium, and large drivers and bushing adapters from 3/8"" to 1-3/8""

$30.48
Click To Buy

3 Pc. Oil Canister Socket Set Service Kit

(KD41830) 3 Pc. Oil Canister Socket Set Service KitFeatures: Kit includes: 32mm Oil Filter Cap Wrench, 27mm Oil Filter Cap Wrench and 36mm Oil Filter Cap Wrench. Comes complete in blow molded case. Low profile Black oxide finish, laser marked. 27mm used on VW. 32mm used on GM and Saturn. 36mm used on Volvo, VW, and Ford trucks.

$24.19
Click To Buy

2 Pc. Push Pin Plier Set

(KD41840) 2 Pc. Push Pin Plier SetFeatures: Kit includes: New 80�?? Push Pin Plier and an original Straight Tip Push Pin Plier.

$25.35
Click To Buy

Oil-Seal Remover and Installer

(KD492) Oil-Seal Remover and InstallerFeatures: Tool removes and installs upper rear main oil seals with engine and crank-shaft in place. It works on both wick- and neoprene-type seals. Chinese Finger-type grip won''t slip from the seal during installation. Set includes a wick seal remover, installer, guide funnels, pusher, offset trimmer and neoprene seal punches.

$20.74
Click To Buy

GearWrench 2 Piece Double X Pliers Set

(KD82106) GearWrench 2 Piece Double X Pliers SetFeatures: Compound joint allows access with minimal handle movement Flush rivet for strength and narrow profile Dual dipped grips Aligned serrated tips for precision gripping Corrosion resistant Alloy Steel Includes: 13"" Straight with 3"" Jaw Capacity and 45�?? Needle Nose Pliers - 12.75"" and 1.75"" Jaw Capacity

$40.92
Click To Buy