The Store

The Repair 98 Auto/Boat/Plane Section

Small Tail Pipe Expander

(LIS32500) Small Tail Pipe ExpanderFeatures: Removes clamp grooves and round out pipes. Practical, rugged tool that make easy work of a tough job. Works with wrench or impact tool Fits 1-5/8"" to 2-7/16""

$24.72
Click To Buy

Stabilizer Link Kit

(LIS33820) Stabilizer Link KitFeatures: Removes the Stabilizer Link to Replace Struts. Easily removes the top steering stabilizer link so the strut can be replaced. Shipping wt. 1 lb. 4 oz. Set includes: 34160 - 8mm Socket: Taurus, Sable, Windstar ''96-''04; ''04 and newer Ford Trucks, Expedition, and Excursion; ''93-''97 and ''99-04 Intrepid, Concorde 33890 - 6mm Hex Bit: ''02 and newer GM Suburban, Tahoe, Yukon, and Trailblazer 26620 - T-40 Torx Bit: Dodge & Chrysler Minivans 26630 - T-45 Torx Bit: Volvo

$25.67
Click To Buy

Hex Bit Socket Set - Metric, 7 Pc.

(LIS33850) Hex Bit Socket Set - Metric, 7 Pc.Features: 3/8"" square drive sockets. High strength, heat-treated alloy steel bits are securely broached into chrome plated sockets. No set screws to tighten! Bits store in a convenient vinyl storage holder. Includes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm,

$22.07
Click To Buy

Dual Overhead Cam (DOHC) Lock Tool

(LIS36880) Dual Overhead Cam (DOHC) Lock ToolFeatures: Locks camshaft sprockets in place during belt/chain replacement. This versatile tool easily locks and holds both camshaft sprockets firmly in place. The two parallel bars ""float"" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt and chain replacement.

$29.32
Click To Buy

Super Torx Set

(LIS37600) Super Torx SetFeatures: 20% Stronger than one-piece Torx bits This set includes nine of the most popular Torx sizes for automotive applications. The six smaller sockets are 1/4"" drive and the 3 larger are 3/8"" drive. Includes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-47 Torx internal sockets in a handy vinyl holder.

$24.48
Click To Buy

Large Magnetic 1/2" Socket Tray- RED

(LIS40900) Large Magnetic 1/2" Socket Tray- REDFeatures: Twenty-two seperate socket compartments allow you to keep your 1/2"" drive standard and deep sockets in one convenient holder. Holds sockets up to 1"" or 20mm. Design of holders leave sockets exposed or easy identification. Powerful magnets securely hold sockets in tray. Rubber feet protect tool box from scatching. ABS plastic. Works with impact or chromed sockets.

$20.21
Click To Buy

Large Magnetic 1/2" Socket Tray- GREEN

(LIS40990) Large Magnetic 1/2" Socket Tray- GREENFeatures: Twenty-two seperate socket compartments allow you to keep your 1/2"" drive standard and deep sockets in one convenient holder. Holds sockets up to 1"" or 20mm. Design of holders leave sockets exposed or easy identification. Powerful magnets securely hold sockets in tray. Rubber feet protect tool box from scatching. ABS plastic. Works with impact or chromed sockets.

$20.21
Click To Buy

Hose Clamp Vise 3-5/8" Long and Opens to 2-1/8"

(LIS44480) Hose Clamp Vise 3-5/8" Long and Opens to 2-1/8"Features: Tools are used to relieve clamp spring pressure in very tight spots. Vise is often left in place, with the clamp compressed, during service. Ramp on jaws guides tab of clamp into correct position and trap it in the slot for safety. Tighten knurled knob by hand or use 1/4"" drive ratchet. Compact design works great in confined spaces. The small size works especially well on heater hose clamps.

$22.45
Click To Buy

Hose Clamp Vise - 3" Long opens to 1-1/2"

(LIS44500) Hose Clamp Vise - 3" Long opens to 1-1/2"Features: Tools are used to relieve clamp spring pressure in very tight spots. Vise is often left in place, with the clamp compressed, during service. Ramp on jaws guides tab of clamp into correct position and trap it in the slot for safety. Tighten knurled knob by hand or use 1/4"" drive ratchet. Compact design works great in confined spaces. The small size works especially well on heater hose clamps.

$18.06
Click To Buy

Harmonic Balancer Puller

(LIS45500) Harmonic Balancer PullerFeatures: Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Includes: (3) M8x1.25x80 bolts, (2) 3/*-16x3"" bolts, (3) 5/16""-18x3"" bolts, (3) M10x1.5x75 bolts, (3) 3/8""-24x3"" bolts, puller body, puller screw, screw tip, and washers.

$25.00
Click To Buy

Hood Prop

(LIS45900) Hood PropFeatures: Works on All Makes of Cars and Trucks The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. The tool telescopes from 18 1/2"" to 46 3/4"". Can be used from the side of car for better access to the engine compartment. Also great for body or repair work on door, trunk lids, or hatchbacks.

$21.87
Click To Buy

Throttle Pedal Depressor

(LIS48700) Throttle Pedal DepressorFeatures: Holds throttle at constant RPM. Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjusment screw to fine-tune the RPM level. Tool is 40"" in overall lenght.

$22.03
Click To Buy

Oil Filter Pliers

(LIS50750) Oil Filter PliersFeatures: Slip Joint Handle for Greater Range Two-position, slip-joint handle produces the range of three separate conventional filter wrenches. Overall range 2 1/4"" to 4"". Jaws are bent at a 20 degree angle to fit more applications. Sure grip teeth prevent slipping. Cushioned handles provide comfort.

$22.69
Click To Buy

Spark Plug Wire Puller - Adjustable

(LIS51750) Spark Plug Wire Puller - AdjustableFeatures: Pliers adjust to 5 different positions allowing easier access to spark plug boots. Specially shaped, cushioned jaws grip the boot straight on or from the side. Plastice handle grips prevent shock.

$22.28
Click To Buy

Tap Socket Set - 8 Pc.

(LIS70500) Tap Socket Set - 8 Pc.Features: These innovative sockets allow you to use thread taps in tight areas where a conventional T-handle would not fit. Set of 8 sockets fits all number and fractional M.C.TI. standard taps thru 1/2"". Also fits 1/8"" NPT and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets come with a vinyl holder.

$25.58
Click To Buy

Combustion Leak Detector Kit

(LIS75500) Combustion Leak Detector KitFeatures: Quickly pinpoints combustion leaks. Checks combustion leaks caused by bad head gaskets, cracked blocks and cracked or warped heads. Indicating fluid changes from blue to yellow when exposed to combustion gases in the radiator. Connect the hose to any vehivle vacuum line. Place tapered end of tool into radiator opening after draining of some coolant. With the engine running, the vehicle''s vacuum draws vapors through the indicating fluid for testng Includes leak detector and testing fluid.

$28.65
Click To Buy

11" C-Clamp Self Adjusting Locking Pliers

(LJ10200) 11" C-Clamp Self Adjusting Locking PliersFeatures: Automatically adjusts to any size with equal pressure - no knob to adjust! Set and forget pressure control screw No slip texture grip Forward release lever allows for smooth and easy unlocking Easy one-handed operation Made of chrome molybdenum steel for strength and durability Meets or exceeds ASME and ANSI standards Limited Lifetime Warranty

$19.96
Click To Buy

11" C-Clamp Self Adjusting Locking Pliers with Swivel Pads

(LJ10201) 11" C-Clamp Self Adjusting Locking Pliers with Swivel PadsFeatures: Automatically adjusts to any size with equal pressure - no knob to adjust! Set and forget pressure control screw No slip texture grip Forward release lever allows for smooth and easy unlocking Easy one-handed operation Made of chrome molybdenum steel for strength and durability Meets or exceeds ASME and ANSI standards Limited Lifetime Warranty

$21.54
Click To Buy

19" C-Clamp Self Adjusting Locking Pliers

(LJ18200) 19" C-Clamp Self Adjusting Locking PliersFeatures: Automatically adjusts to any size with equal pressure - no knob to adjust! Set and forget pressure control screw No slip texture grip Forward release lever allows for smooth and easy unlocking Easy one-handed operation Made of chrome molybdenum steel for strength and durability Meets or exceeds ASME and ANSI standards Limited Lifetime Warranty

$27.50
Click To Buy

19" C-Clamp Self Adjusting Locking Pliers with Swivel Pads

(LJ18201) 19" C-Clamp Self Adjusting Locking Pliers with Swivel PadsFeatures: Automatically adjusts to any size with equal pressure - no knob to adjust! Set and forget pressure control screw No slip texture grip Forward release lever allows for smooth and easy unlocking Easy one-handed operation Made of chrome molybdenum steel for strength and durability Meets or exceeds ASME and ANSI standards Limited Lifetime Warranty

$28.79
Click To Buy

6" & 10" Curved Jaw Self Adjusting Locking Pliers Set

(LJ80200) 6" & 10" Curved Jaw Self Adjusting Locking Pliers SetFeatures: Chrome Molybdenum steel construction Added durability and rust protection No slip texture grip Set and forget pressure control Dial in the amount of gripping force from slight to extreme and forget about it, regardless of the size of the object you want to grab No pinch, easy squeeze comfort release lever Stays locked until you release it Set Includes: 6"" & 10"" curved jaw pliers

$25.98
Click To Buy

2 Pc. Set with 10" Curved Jaw and 9" Needle Nose Self-Adjusting Pliers

(LJ80300) 2 Pc. Set with 10" Curved Jaw and 9" Needle Nose Self-Adjusting PliersFeatures: Chrome Molybdenum steel construction Added durability and rust protection No slip texture grip Set and forget pressure control Dial in the amount of gripping force from slight to extreme and forget about it, regardless of the size of the object you want to grab No pinch, easy squeeze comfort release lever Stays locked until you release it Set Includes: 10"" curved jaw pliers and the 9"" Needle nosed plier

$26.12
Click To Buy

6 1/2" and 9 1/2" AutoGrip Pliers Set

(LJ80500) 6 1/2" and 9 1/2" AutoGrip Pliers SetFeatures: Lockjaw Self-Adjusting Auto-Grip Groove Pliers are a true innovation to the tool market. With no push button or two-handed manual adjustment, the 6.5"" and 9.5"" individual pliers and plier�?s kit offer a time saving, quality built tool for the professional. Most unique to the product is its ability to not only adjust to size but for the jaws to automatically adjust to parallel. The rugged steel construction, ergonomic grips and lifetime warranty make this a great new tool! True self-adjusting groove pliers with no push button knobs or manual adjustments Jaws automatically adjust to parallel Rugged steel construction Ergonomic grips for comfort Includes 6 1/2"" and 9 1/2"" Auto-Grip Pliers Limited Lifetime warranty

$27.76
Click To Buy

HD Premium Grease Gun

(LMXLX1142) HD Premium Grease GunFeatures: Heavy-duty, LuCast TM, Cast-Alloy Head with heavier and reinforced wall thickness for extra strength. Develops up to 10,000 PSI (690 Bar) and burst pressure over 17,500 PSI (1200 Bar) Handy 3-way loading - fill with standard cartridge, suction or bulk fill Fully chrome plated finish for maximum protection against corrosion Equipped with air bleeder valve to release trapped air Includes filler nipple with ball check for use with grease filler pump Tough and resilient ""Reversible"" follower eliminates grease bypass and allows a superior seal for either cartridge or bulk loading applications Deluxe, contoured lever helps develop more pressure with less effort. Allows to maintain pressure and grease flow on short strokes in confined spaces and for more accurate applications Heavy-duty follower spring for consistent priming Heavy gauge steel barrel (18 G / 1.3 mm) assures durability and withstands high crush pressures Wide band, non-slip knurling for sure-grip handling Domed end-cap for extra strength and longer life Slip resistant hand grip for firm grip comfort and safer operation Ergonomically designed T-handle provides positive grip Outputs 5.2 oz. (150 g) of grease per 100 strokes Complete with four hardened jaws hydraulic coupler with ball Check, Non-drip Cap and 6"" (150 mm) Extension Pipe

$18.58
Click To Buy

48" Thermoplastic Grease Hose

(LMXLX1214) 48" Thermoplastic Grease HoseFeatures: 48"" (120 cm), 1/8"" High Quality Hose. One end has High Quality 1/8'' NPT Male Thread Fitting and other end has Heavy Duty, High Quality 3/8""-32 UNEF Male Thread Fitting Made of Nylon Liner, Aramid Fiber Reinforcement and Un-perforated Black Urethane Cover Fully Bonded Construction to Maximize Kink Resistance and Minimize Bend Radius Working Temperature Range : -40�?? F (-40�?? C) Min. to 212�?? F (100�?? C) Max. Bend Radius : Meets or exceeds SAE 100 R7 Spring Guard provides Non-slip, Push-pull Grip and prevents accidental Kinking Nominal I.D. : 1/8"" (3.175 mm) / O.D. : .315"" (8.0 mm) Maximum Working Pressure : 7,500 PSI (517 Bar) Minimum Burst Pressure : 20,000 PSI (1380 Bar) Comes with Spring Guard at each end

$21.61
Click To Buy

Heavy-Duty Lever Type Grease Gun

(LNC1142) Heavy-Duty Lever Type Grease GunFeatures: Fast one-hand operation 5"" rigid extension and coupler Rugged cast-iron pump head for strength and durability. Delivers fast dependable lubrication. Extra heavy-duty follower spring Load by suction, filler pump or cartridge 16oz. bulk, 14.5oz cartridge lube capacity

$20.00
Click To Buy