The Store

The Repair 99 Auto/Boat/Plane Section

Lever Grease Gun with Whip Hose

(LNC1147) Lever Grease Gun with Whip HoseFeatures: 18"" Whip hose and coupler. Fast one-hand operation Rugged cast-iron pump head for strength and durability. Delivers fast dependable lubrication. Extra heavy-duty follower spring Load by suction, filler pump or cartridge Follower flips over for use with cartridge 16oz. bulk, 14.5oz cartridge lube capacity

$25.74
Click To Buy

12-Volt DC Battery Charger for PowerLuber Grease Guns

(LNC1215) 12-Volt DC Battery Charger for PowerLuber Grease GunsFeatures: Now you can recharge your PowerLuber batteries while you�?re on the job - in your truck, construction equipment, farm machinery - everywhere you need to keep working. Plugs into vehicle 12V cigarrete/accessory socket.

$29.35
Click To Buy

Straight Hydraulic Coupler Extension

(LNC5855) Straight Hydraulic Coupler ExtensionFeatures: Use to reach confined grease fittings Includes extension and lock-on sleave

$25.88
Click To Buy

90�?? Angle Hydraulic Coupler Adapter

(LNC5859) 90�?? Angle Hydraulic Coupler AdapterFeatures: 90�?? angle solves the problem of so-called ""inaccessible"" grease fittings Design eliminates need to remove ""deep-dish"" wheels for lubrication of tie rod ends and ball joints. Includes 90�?? coupler and lock-on extension

$21.92
Click To Buy

Grease Gun Whip Hose - 36 Inch

(LNC5861) Grease Gun Whip Hose - 36 InchFeatures: For hand or power grease guns Coil spring prevents hose kinking and provides convenient non-slip push-pull grip Standard 1/8"" NPT(M) threads

$22.58
Click To Buy

Fluid Suction Gun - 18oz. Capacity

(LNC615) Fluid Suction Gun - 18oz. CapacityFeatures: Holds up to 18 ounces of fluid Flexible nozzle for transmission, diffential or oil filter service. Precision follower fitted to barrel for superior suction and is impervious to oil, grease and water. Finished in rust-resistant, powder coated blue paint

$18.71
Click To Buy

Extended Needle Nozzle for U-Joint Greasing

(LNC82784) Extended Needle Nozzle for U-Joint GreasingFeatures: Allows grease gun operator to contact flush type or hard to reach hydraulic type fittings, including u-joints Extended version with locking sleeve

$19.03
Click To Buy

Metered Control Valve for Oil/ATF

(LNC877) Metered Control Valve for Oil/ATFFeatures: Totalizing counter 16 quart dial total 1/4 quart graduation 10"" extension hose and no-drip nozzle Comes with swivel Designed to dispense oil, ATF and anti-freeze

$303.09
Click To Buy

Heavy-Duty Lever Action Barrel Pump

(LNCG401) Heavy-Duty Lever Action Barrel PumpFeatures: Fits 30-55 gallon drums. Pump delivers 10oz. per stroke. Comes with standard bung bushing. Designed for efficient transfer of pertrolieum based, non-corrosive liquids. NOTE: Not suitable for dispensing laquer based thinners.

$23.75
Click To Buy

Rotary Barrel Pump for Drums

(LNCG402) Rotary Barrel Pump for DrumsFeatures: Cast iron pump head for transferring petroleum-based, non-corrosive fluids such as Diesel fuel, heating oil, kerosene, lacquer thinner, motor oil, oils (heavy & light), transmission fluid. Comes with standard bung bushing found on most drums. Delivers approximately one gallon per 18 revolutions of handle. Great for commercial, automotive, farm and industrial applications.

$49.95
Click To Buy

Bi-Metal Reciprocating Saw Blades - 18 TPI, 50 Pack

(LNX22751OSB618R) Bi-Metal Reciprocating Saw Blades - 18 TPI, 50 PackFeatures: Enhanced bi-metal blades for superior cutting performance and durability Designed to maximize the effectiveness of machines that are more powerful and versatile than ever Shatter resistant bi-metal blades bend and resist breaking and extend blade life Unique blade geometry positions the blade for optimum cutting performance TUFFTOOTH design is reinforced to cut stronger and last longer Applications: Structural steel, Pipe, Conduit, Stainless steel: 1/16"" - 3/16"" thick, non-ferrous metal: 1/16"" - 5/16"" Width: 3/4"" Thickness: .035"" TPI: 18 Length: 6""

$95.92
Click To Buy

Bi-Metal Reciprocating Saw Blade - 6", 24 TPI, 50 Pack

(LNX22757OSB624R) Bi-Metal Reciprocating Saw Blade - 6", 24 TPI, 50 PackFeatures: Enhanced bi-metal blades for superior cutting performance and durability Designed to maximize the effectiveness of machines that are more powerful and versatile than ever Shatter resistant bi-metal blades bend and resist breaking and extend blade life Unique blade geometry positions the blade for optimum cutting performance TUFFTOOTH design is reinforced to cut stronger and last longer Applications: All metals less than 1/8"" thick, Tubing, Conduit, Trim Width: 3/4"" Thickness: .035"" TPI: 24 Length: 6""

$95.92
Click To Buy

242 Threadlocker Medium Strength - 36ml Bottle

(LOC37477) 242 Threadlocker Medium Strength - 36ml BottleFeatures: Ideal for all nut and bolt applications 1/4"" to 3/4"" (6mm to 20mm). Eliminates the need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.

$18.91
Click To Buy

262 Threadlocker High Strength - 36ml Tube

(LOC37478) 262 Threadlocker High Strength - 36ml TubeFeatures: A permanent, high strength product that is applied to fasteners up to 3/4"" (20mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or enviromental conditions. Localized heating and hand tools are required to separate parts. Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, tranmission shaft bolts.

$18.91
Click To Buy

Bearing Mount 609- Close Fits

(LOC37483) Bearing Mount 609- Close FitsFeatures: Loctite 609 is a low viscosity, rapidcuring anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005"" in diameter. Adds up to 3,000psi holding power. 36ml bottle

$20.73
Click To Buy

19gm Threadlocker Blue Stick

(LOC37614) 19gm Threadlocker Blue StickFeatures: This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as the traditional threadlocking liquid, Loctite 242 Blue threadlocker. This wax-like stick is conveniently packaged in a self-feeding stick applicator. Well suited for difficult repairs, as in overhead applications. It can be applied to a part even if assembly is to take place at a later time, making the stick ideal for volume assembly. Removable with hand tools.

$20.03
Click To Buy

19gm Threadlocker Red Stick

(LOC37700) 19gm Threadlocker Red StickFeatures: With the same convenient packaging as the medium strength Threadlocker Blue Stick, this high strength threadlocker is better suited for heavy-duty applications where resistance to heavy shock, vibration, and stress levels is required. Localized heating and hand tools are required to separate parts. Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts.

$20.03
Click To Buy

Inflate-A-Wedge Lockout Aid

(LT275) Inflate-A-Wedge Lockout AidFeatures: The unique Inflate-A-Wedge allows you to safely seperate the door frame from the vehicle body or seperate the door panel and weatherstripping from the window to unlock the vehicle.

$25.46
Click To Buy

Locking Lugnut Removal Socket

(LT40025) Locking Lugnut Removal SocketFeatures: The LT 40025 removes most OEM and aftermarket locking lugnuts. Works with a 1/2"" impact gun or breaker bar

$25.99
Click To Buy

"Quick-Off" Damaged Lugnut Remover

(LT4200A) "Quick-Off" Damaged Lugnut RemoverFeatures: Reversible socket for removal of late model OEM and aftermarket 3/4"", 19mm, 13/16"" and 21mm lugnuts that are damaged/rounded. The LT 4200A has a fluted design which gives the socket a tight grip to remove the most difficult lugnuts from the wheel and easy removal of the lugnut from the socket Works with a 1/2"" impact gun or breaker bar

$22.51
Click To Buy

Dual Piston Brake Press

(LT770) Dual Piston Brake PressFeatures: The LT-770 presses in dual brake pistons as well as single pistons brake calipers. Universal application for most cars, light and heavy trucks. Easy single piece operation, eliminates nuts and bolts to assemble and disassemble on brake assemblies.

$24.48
Click To Buy

Impact Screwdriver Socket Holder

(LT875) Impact Screwdriver Socket HolderFeatures: Designed for use with .401 shank pneumatic impact hammers. No more bruised hands and fingers. Great for use in tight quarters where there is no room for hammers. Fits manual impact screwdrivers (such as Lisle 29200) .

$19.67
Click To Buy

Magnetic Impact Gun Holder

(LT910) Magnetic Impact Gun HolderFeatures: The LT-910 Magnetic Impact Gun Holder gives a secure place to hold your impact gun. Use on a tool box or on any metal surface anywhere in the shop. The tubular design mounts to any flat steel surface with a 160 pound magnetic face. Move it to where you need it - always handy.

$20.00
Click To Buy

Mag-Lite Flashlight 2-Cell D, Black

(MAGS2D016) Mag-Lite Flashlight 2-Cell D, BlackFeatures: Considered to be the finest flashlight in the world. Designed and built to last a lifetime. This is why more police, security, emergency, medical and fire professionals around the world rely on Mag-Lite flashlights. Designed, engineered and made in the USA. Features: Adjustable beam, krypton bulb (extra included in tail cap), self cleaning switch, finest metal contacts, computer designed reflector, high-grade rubber O-rings are exceeding resistant to water and shock, corrosion resistant anodized finish inside and out.

$20.91
Click To Buy

Mag-Lite Flashlight 2-Cell D, Red

(MAGS2D036) Mag-Lite Flashlight 2-Cell D, RedFeatures: Considered to be the finest flashlight in the world. Designed and built to last a lifetime. This is why more police, security, emergency, medical and fire professionals around the world rely on Mag-Lite flashlights. Designed, engineered and made in the USA. Features: Adjustable beam, krypton bulb (extra included in tail cap), self cleaning switch, finest metal contacts, computer designed reflector, high-grade rubber O-rings are exceeding resistant to water and shock, corrosion resistant anodized finish inside and out.

$20.91
Click To Buy

Mag-Lite Flashlight 2-Cell D, Blue

(MAGS2D116) Mag-Lite Flashlight 2-Cell D, BlueFeatures: Considered to be the finest flashlight in the world. Designed and built to last a lifetime. This is why more police, security, emergency, medical and fire professionals around the world rely on Mag-Lite flashlights. Designed, engineered and made in the USA. Features: Adjustable beam, krypton bulb (extra included in tail cap), self cleaning switch, finest metal contacts, computer designed reflector, high-grade rubber O-rings are exceeding resistant to water and shock, corrosion resistant anodized finish inside and out.

$19.87
Click To Buy